Hi, i have problem when i try to check consist of system, and I can't fix it..
outut of lppchk -v below..
Code:
[xxx:root:/home/root:] oslevel -s
6100-00-01-0748
[xxx:root:/home/root:] lppchk -v
lppchk: The following filesets need to be installed or corrected to bring
the system to a consistent state:
devices.pciex.b3154a63.rte 6.1.0.0 (not installed; requisite fileset)
devices.pciex.b3154a63.rte 6.1.7.17 (usr: not installed, root: COMMITTED)
devices.pciex.b3154a63.rte 6.1.7.18 (usr: not installed, root: APPLIED)
devices.pciex.b3154a63.rte 6.1.7.19 (usr: not installed, root: APPLIED)
devices.pciex.b3154a63.rte 6.1.8.16 (usr: not installed, root: APPLIED)
devices.pciex.b3154a63.rte 6.1.8.18 (usr: not installed, root: APPLIED)
devices.pciex.b3154a63.rte 6.1.8.19 (usr: not installed, root: APPLIED)
devices.usbif.08025002.rte 6.1.7.17 (usr: not installed, root: COMMITTED)
devices.usbif.08025002.rte 6.1.7.18 (usr: not installed, root: COMMITTED)
devices.usbif.08025002.rte 6.1.7.19 (usr: not installed, root: COMMITTED)
devices.usbif.08025002.rte 6.1.8.16 (usr: not installed, root: COMMITTED)
devices.usbif.08025002.rte 6.1.8.18 (usr: not installed, root: COMMITTED)
Moderator's Comments:
Please use code tags as required by forum rules!
Last edited by RudiC; 06-26-2016 at 07:50 AM..
Reason: Added code tags.
Hi,
I am running an oracle db 9.2.0.5.0 on ibm p5 550 aix 5.3 with 10g ram, 10G swap space 3 database instances each SGA about 500Meg.
I am getting the following error in my alert log file from time to time:
skgpspawn failed:category = 27142, depinfo = 11, op = fork, loc = skgpspawn3
... (0 Replies)
My root disk is failed and how to replace the root disk in AIX.
Can u give a detailed explanation in step wise.
Pls give the answer taking different scenarios.
Regards
Praveen (1 Reply)
Hi all,
I installed AIX 5.3 (TL 5300-08-01) and after that I updated to TL 5300-09-01.
The problem is that, when I issue "lppchk -v" I get the following error:
# lppchk -v
lppchk: The following filesets need to be installed or corrected to bring
the system to a consistent state:... (10 Replies)
Hi,
I experience an issue with printer queue configuration and when I tried to verify files of the printer and lpd installable software product, I get these messages:
#lppchk -c
lppchk: 0504-208 Size of /usr/lib/lpd/digest is 44634,
expected value was 44874.
lppchk: 0504-208 Size of... (8 Replies)
Hi,
I am installing bison-2.4.3 on AIX.
I am facing the below error.
Could not load program gawk:
Symbol resolution failed for gawk because:
Symbol __pthread (number 159) is not exported from dependent module /usr/lib/libpthreads.a(shr_xpg5.o).
Symbol libintl_bindtextdomain (number... (5 Replies)
Hello Team,
Hope all doing well. I have tried to upgrade on of my AIX box too the latest SP and TL, but unfortunately it's got failed(Details are below). Need expert help to fix this.
Before up-gradation :
root@# oslevel -s
6100-07-01-1141
root@# instfix -i | grep ML
All... (3 Replies)
I have a AIX 7.1 system that has 3 failed disks, 1 in rootvg and 2 in vg_usr1.
Here is the output of lspv.
# lspv
hdisk0 00044d4dfbb11575 vg_usr1 active
hdisk1 0000150179158027 vg_usr1 active
hdisk2 ... (11 Replies)
im new to aix... my task is suppose to be simple. install openssh
i followed this article:
Installing OpenSSH and OpenSSL on AIX 6.1 | Keymon's snippets and brushstrokes
when i try to start the sshd service with the command: "startsrc -s sshd"
im getting an error saying:
"the sshd subsystem... (6 Replies)
Discussion started by: guy3145
6 Replies
LEARN ABOUT DEBIAN
paps
PAPS(1) General Commands Manual PAPS(1)NAME
paps - UTF-8 to PostScript converter using Pango
SYNOPSIS
paps [options] files...
DESCRIPTION
paps reads a UTF-8 encoded file and generates a PostScript language rendering of the file. The rendering is done by creating outline curves
through the pango ft2 backend.
OPTIONS
These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is
included below.
--landscape
Landscape output. Default is portrait.
--columns=cl
Number of columns output. Default is 1.
Please notice this option isn't related to the terminal length as in a "80 culums terminal".
--font=desc
Set the font description. Default is Monospace 12.
--rtl Do right to left (RTL) layout.
--paper ps
Choose paper size. Known paper sizes are legal, letter and A4. Default is A4.
Postscript points
Each postscript point equals to 1/72 of an inch. 36 points are 1/2 of an inch.
--bottom-margin=bm
Set bottom margin. Default is 36 postscript points.
--top-margin=tm
Set top margin. Default is 36 postscript points.
--left-margin=lm
Set left margin. Default is 36 postscript points.
--right-margin=rm
Set right margin. Default is 36 postscript points.
--gutter-width=gw
Set gutter width. Default is 40 postscript points.
--help Show summary of options.
--header
Draw page header for each page.
--markup
Interpret the text as pango markup.
--lpi Set the lines per inch. This determines the line spacing.
--cpi Set the characters per inch. This is an alternative method of specifying the font size.
--stretch-chars
Indicates that characters should be stretched in the y-direction to fill up their vertical space. This is similar to the texttops
behaviour.
AUTHOR
paps was written by Dov Grobgeld <dov.grobgeld@gmail.com>.
This manual page was written by Lior Kaplan <kaplan@debian.org>, for the Debian project (but may be used by others).
April 17, 2006 PAPS(1)
06-26-2016
