PPPOE-SERVER(8) 					      System Manager's Manual						   PPPOE-SERVER(8)

NAME

       pppoe-server - user-space PPPoE server

SYNOPSIS

       pppoe-server [options]

DESCRIPTION

       pppoe-server is a user-space server for PPPoE (Point-to-Point Protocol over Ethernet) for Linux and other UNIX systems.	pppoe-server works
       in concert with the pppoe client to respond to PPPoE discovery packets and set up PPPoE sessions.

OPTIONS

       -F     The -F option causes pppoe-server not to fork and become a daemon.  The default is to fork and become a daemon.

       -I interface
	      The -I option specifies the Ethernet interface to use.  Under Linux, it is typically eth0 or eth1.  The  interface  should  be  "up"
	      before  you  start pppoe-server, but should not be configured to have an IP address.  You can supply multiple -I options if you want
	      the server to respond on more than one interface.

       -T timeout
	      This option is passed directly to pppoe; see pppoe(8) for details.  If you are using kernel-mode PPPoE, this option has no effect.

       -C ac_name
	      Specifies which name to report as the access concentrator name.  If not supplied, the host name is used.

       -S name
	      Offer a service named name.  Multiple -S options may be specified; each one causes the named service to be advertised in a  Service-
	      Name  tag in the PADO frame.  The first -S option specifies the default service, and is used if the PPPoE client requests a Service-
	      Name of length zero.

       -m MSS This option is passed directly to pppoe; see pppoe(8) for details.  If you are using kernel-mode PPPoE, this option has no effect.

       -s     This option is passed directly to pppoe; see pppoe(8) for details.  In addition, it causes pppd to be invoked with the sync option.

       -L ip  Sets the local IP address.  This is passed to spawned pppd processes.  If not specified, the default is 10.0.0.1.

       -R ip  Sets the starting remote IP address.  As sessions are established, IP addresses are assigned starting from ip.   pppoe-server  auto-
	      matically  keeps	track of the pool of addresses and passes a valid remote IP address to pppd.  If not specified, a starting address
	      of 10.67.15.1 is used.

       -N num Allows at most num concurrent PPPoE sessions.  If not specified, the default is 64.

       -p fname
	      Reads the specified file fname which is a text file consisting of one IP address per line.  These IP addresses will be  assigned	to
	      clients.	 The number of sessions allowed will equal the number of addresses found in the file.  The -p option overrides both -R and
	      -N.

	      In addition to containing IP addresses, the pool file can contain lines of the form:

		   a.b.c.d-e

	      which includes all IP addresses from a.b.c.d to a.b.c.e.	For example, the line:

		   1.2.3.4-7

	      is equivalent to:

		   1.2.3.4
		   1.2.3.5
		   1.2.3.6
		   1.2.3.7

       -r     Tells the PPPoE server to randomly permute session numbers.  Instead of handing out sessions  in	order,	the  session  numbers  are
	      assigned in an unpredictable order.

       -u     Tells the server to invoke pppd with the unit option.  Note that this option only works for pppd version 2.4.0 or newer.

       -o offset
	      Instead  of  numbering  PPPoE  sessions  starting at 1, they will be numbered starting at offset+1.  This allows you to run multiple
	      servers on a given machine; just make sure that their session numbers do not overlap.

       -f disc:sess
	      The -f option sets the Ethernet frame types for PPPoE discovery and session frames.  The types are specified as hexadecimal  numbers
	      separated by a colon.  Standard PPPoE uses frame types 8863:8864.  You should not use this option unless you are absolutely sure the
	      peer you are dealing with uses non-standard frame types.

       -k     The -k option tells the server to use kernel-mode PPPoE on Linux.  This option is available only on Linux kernels 2.4.0  and  later,
	      and only if the server was built with kernel-mode support.

       -h     The -h option prints a brief usage message and exits.

OPERATION

       pppoe-server listens for incoming PPPoE discovery packets.  When a session is established, it spawns a pppd process.  The following options
       are passed to pppd:

       nodetach noaccomp nobsdcom nodeflate nopcomp novj novjccomp
       default-asyncmap

       In addition, the local and remote IP address are set based on the -L and -R options.  The pty option is supplied along with a pppoe command
       to initiate the PPPoE session.  Finally, additional pppd options can be placed in the file /etc/ppp/pppoe-server-options (which must exist,
       even if it is just empty!)

       Note that pppoe-server is meant mainly for testing PPPoE clients.  It is not a high-performance server meant for production use.

AUTHORS

       pppoe-server was written by David F. Skoll <dfs@roaringpenguin.com>.

       The pppoe home page is http://www.roaringpenguin.com/pppoe/.

SEE ALSO

       adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8),  pppoe.conf(5),  pppoe(8),  adsl-setup(8),  adsl-status(8),  pppoe-sniff(8),  pppoe-
       relay(8)

4th Berkeley Distribution					    3 July 2000 						   PPPOE-SERVER(8)