06-19-2016
Quote:
Originally Posted by
bakunin
What do you mean by that? Because the "PVID" (Physical Volume Identifier) has nothing to do with networks at all. Or is that completely unrelated to the rest of your question? In this case please create a new thread (or ask a moderator, we can split this thread into two for the separate questions).
I hope this helps.
bakunin
Sorry for the confusion there Bakunin. What I meant by the PVID is (Port VLAN ID) in the virtual ethernet adapter settings. But I know how this works now.
- K
---------- Post updated at 11:32 AM ---------- Previous update was at 11:26 AM ----------
Quote:
Originally Posted by
agent.kgb
if you can bring your systems offline:
1. add VLAN 31 to the network switch ports.
2. configure a new virtual adapter for VLAN 31 on both of your VIOSes.
3. configure the virtual adapter into the existing SEA.
4. configure a new virtual adapter for VLAN 31 for all of your AIX LPARs.
5. check that it works (usually it is enough to get it up with ifconfig and look at traffic with tcpdump, even without an IP address).
6. on day X, when you have downtime, remove your old virtual adapters with VLAN 30 from the AIX LPARs and configure IP addresses on the new virtual adapters.
7. if everything works ok, remove virtual adapter with VLAN 30 from SEA and from all VIOSes.
8. remove VLAN 30 from the network switch ports.
Thanks agent.kgb. This seems like a good plan. I will try this and see how it goes.
- Kaelu
10 More Discussions You Might Find Interesting
1. IP Networking
I understand how to change the ip address permanently however, I need to also make a permanent change to the subnet mask. How would I accomplish this. (5 Replies)
Discussion started by: johnparksjr
5 Replies
2. IP Networking
Hi,
My project needs to migrate the existing Subnet (255.255.255.0) to a new subnet and change the ipaddresses (currently C class). How can I do that. I need some information.
John (0 Replies)
Discussion started by: johnmarsh
0 Replies
3. Solaris
Hi,
I have a task to edit the subnet mask in almost 100+ solaris servers.Few of the servers are configured with IPMP.There will be no change of IP address or default gateway.If its a single IP we can bring NIC down,change the subnet mask in /etc/netmasks,then bring the NIC back to normal.But... (3 Replies)
Discussion started by: rajip23
3 Replies
4. AIX
AIX:Command to get netaddress/subnet address command in IPv4/IP6
Can anybody help us with a command to retrieve netaddress/subnet address command in IPv4/IP6 on aix machine.
net/subnet address is in the format 172.16.212.0(signifies all 255 machines in an IPv4 network) (2 Replies)
Discussion started by: rookie8278
2 Replies
5. AIX
I am new to this forum so please bare with me. I did search for this answer prior to posting but no luck.
Running an AIX NIM Master at 5.3TL9SP4, with about 100 clients. The subnet of one of the networks defined in the NIM env has changed. When I go to Manage Networks, Change/Show... (0 Replies)
Discussion started by: juredd1
0 Replies
6. Solaris
Hello,
can anyone help me with the command to change the subnet mask on solaris 10? The mask is currently 255.255.255.255 I will like to change it to 255.255.2555.0.
Thank you (5 Replies)
Discussion started by: cjashu
5 Replies
7. AIX
Hi,
I have a p520 with 2 cpus and 10gb of ram.Is it sufficient enough to create 2 lpars.What other things we have to check. (2 Replies)
Discussion started by: sekar52
2 Replies
8. AIX
Hello Everyone,
Can you please help me with the following questions regarding recycling LPARs.
1) Is it recommended to automate the reboot of AIX LPARs with a script ?
i mean we've few App LPARs and Database LPARs. we would like to bring down LPARs on last sunday of every month for about 1... (4 Replies)
Discussion started by: System Admin 77
4 Replies
9. AIX
Hi,
I've verified my AIX 7.1 LPAR , and TCB is disabled by default.
#odmget -q attribute=TCB_STATE PdAt
PdAt:
uniquetype = ""
attribute = "TCB_STATE"
deflt = "tcb_disabled"
values = ""
width = ""
type = ""
generic = ""
... (3 Replies)
Discussion started by: System Admin 77
3 Replies
10. UNIX for Advanced & Expert Users
Dear all,
I have a remote CentOS7 server that has two network cards. Each card has four ports and port one of card one was defined with the IP address assigned to the server. So far, so good and it's been working for over a year. We have now got cables sorted out so there are four paths... (4 Replies)
Discussion started by: rbatte1
4 Replies
LEARN ABOUT DEBIAN
vconfig
VCONFIG(8) System Manager's Manual VCONFIG(8)
NAME
vconfig - VLAN (802.1q) configuration program.
SYNOPSIS
vconfig [lots of long options]
DESCRIPTION
The vconfig program allows you to create and remove vlan-devices on a vlan enabled kernel. Vlan-devices are virtual ethernet devices which
represents the virtual lans on the physical lan.
OPTIONS
add [interface-name] [vlan-id]
Creates a vlan-device on [interface-name]. The resulting vlan-device will be called according to the nameing convention set.
rem [vlan-device]
Removes the named vlan-device.
set_flag [vlan-device] 0 | 1
When 1 (the default since 2.6.18), ethernet header reorders are turned on. Dumping the device will appear as a common ethernet
device without vlans. When 0 however, ethernet headers are not reordered, which results in vlan tagged packets when dumping the
device. Usually the default gives no problems, but some packet filtering programs might have problems with it.
set_egress_map [vlan-device] [skb-priority] [vlan-qos]
This flags that outbound packets with a particular skb-priority should be tagged with the particular vlan priority vlan-qos. The
default vlan priority is 0.
set_ingress_map [vlan-device] [skb-priority] [vlan-qos]
This flags that inbound packets with the particular vlan priority vlan-qos should be queued with a particular skb-priority. The
default skb-priority is 0.
set_name_type VLAN_PLUS_VID | VLAN_PLUS_VID_NO_PAD | DEV_PLUS_VID | DEV_PLUS_VID_NO_PAD
Sets the way vlan-device names are created. Use vconfig without arguments to see the different formats.
NOTES VLAN will use Broadcom's NICE interface when the network device supports it. This is necessary, since usually the hardware of these
devices already removes the vlan tag from the ethernet packet. The set_flag option on vlan-devices created on such a physical net-
work device will be ignored. Dumping the network-device will show only untagged(non-vlan) traffic, and dumping the vlan-devices
will only show traffic intended for that vlan, without the tags.
FILES
/proc/net/vlan/config
/proc/net/vlan/[vlan-device]
SEE ALSO
ip(8), ifconfig(8)
AUTHORS
This manual page was written by Ard van Breemen <ard@kwaak.net>
The vlan patch is written by Ben Greear <greearb@candelatech.com>
VCONFIG(8)