Here is output from fdisk within a Bio-Linux system:
On a Virtual Machine run within virtualbox:
However, I have not used Bio-Linux sufficiently to be able to provide help much beyond this. Regrettably, I also seem to have misplaced my install notes.
I suggest you be more precise about ... cant find the OS after rebooting the machine by providing the exact message(s) you see when trying to boot.
Does anyone know a good driver site. If you've heard of driverguide.com or driversearch.com please do not reccomend them because I already know them. I need to know where to get Motherboard drivers for a homemade computer. If there is any info that you need to know feel free to make a reply.
:) (5 Replies)
Hello,
I got a computer in which I decided to change RAM memory cards.
These (2) RAMs are:
Brand: Crucial Technology DDR Ram 266 Mhz
and when I ran memtest86 tool, both of them have errors.
So I decided to change them and purchase a new ones.
I bought:
Brand: Patriot DDR RAM 512 Mb 266... (2 Replies)
Hi All,
I installed Ubuntu10.04LTS after using it for some day , a problem started ,at system boot time error is coming
Bad BIOS checksum.Starting BIOS recovery.
checking for floppy.checking for CD is coming repeatedly but system is not cuming up.
After sometime output was also not... (0 Replies)
Hi,
Can anyone please advise how I can reset my BIOS password on my BL460c-class blade?
I need to make some changes but do not know what the password has been set to. This is a newly purchased server so any default I can try may be useful.
R,
D. (3 Replies)
Hi friends,
I hope you are doing well. Can you please tell me which part of the motherboard contains the BIOS software, name that exact location. And could please give me the names of the firmwares for atleast 5 archetictures, like sun sparc, ibm power, hp alpha etc.
Looking forward to your... (0 Replies)
okay,i made a grave mistake in installing the base bare bones install of debian.
here i have edited this from the original.
this morning when i got home from work i did some searching and then just shut the system down via the mechanical off on switch. waited a few minutes and then restarted... (0 Replies)
I need to update a setting in the BIOS on our SCO Openserver 5.0.7 system and all I can bring up about it says I need to create a dos bootable disk of some sort. The problem is that it doesn't seem like dos is loading up fully. I created the dos bootable thumb drive on a Windows PC using Rufus... (7 Replies)
Hi All,
unable to fetch the bios configuration information and service provider information in centos 5 using dmidecode command.
ServiceProvider=`dmidecode -s system-product-name |awk '{print $1}'`
BIOS_Configuration=`dmidecode | grep "BIOS Information" -A10 | grep -e... (4 Replies)
Discussion started by: sravani25
4 Replies
LEARN ABOUT OSX
newfs_exfat
NEWFS_EXFAT(8) BSD System Manager's Manual NEWFS_EXFAT(8)NAME
newfs_exfat -- construct a new ExFAT file system
SYNOPSIS
newfs_exfat [-N] [-R] [-I volume-serial-number] [-S bytes-per-sector] [-a sectors-per-FAT] [-b bytes-per-cluster] [-c sectors-per-cluster]
[-n number-of-FATs] [-s total-sectors] [-v volume-name] special
DESCRIPTION
The newfs_exfat utility creates an ExFAT file system on device special. If the -R option is not given, and the device is already formatted
as ExFAT, it will preserve the partition offset, bytes per cluster, FAT offset and size, number of FATs, offset to start of clusters, number
of clusters, volume serial number, and volume name (label). If a volume name was specified via the -v option, that name is used instead of
the volume's previous name.
The options are as follow:
-N Don't create a file system: just print out parameters.
-R Do not check whether the device is currently formatted as ExFAT. Always derive the partition offset, bytes per cluster, FAT offset
and size, and offset to start of clusters based on the device type and size.
-I volume-serial-number
Volume ID, a 32-bit integer.
-S bytes-per-sector
Number of bytes per sector. Acceptable values are powers of 2 in the range 512 through 4096.
-a sectors-per-FAT
Number of sectors per FAT.
-b bytes-per-cluster
File system block size (bytes per cluster). Acceptable values are powers of 2 in the range 512 through 33554432.
-c sectors-per-cluster
Sectors per cluster. Acceptable values are powers of 2 in the range 1 through 65536.
-n number-of-FATs
Number of FATs. Acceptable values are 1 or 2. The default is 1. Using any value other than 1 is discouraged, and may be incompati-
ble with other devices.
-s total-sectors
The total number of sectors in the device.
-v volume-name
Volume name (label). The name will be converted to UTF-16, and must be no longer than 11 UTF-16 characters. ASCII control charac-
ters and some punctuation characters are not allowed (similar to DOS 8.3-style names). NOTE: The volume name may be an empty (zero-
length) string.
EXAMPLES
newfs_exfat /dev/disk0s1
Create a file system, using default parameters (or existing ExFAT layout), on /dev/rdisk0s1.
newfs_exfat -v Hello disk2s1
Create a file system with the name "Hello" on /dev/rdisk2s1.
SEE ALSO mount_exfat(8), fsck_exfat(8)DIAGNOSTICS
Exit status is 0 on success and 1 on error.
HISTORY
The newfs_exfat command appeared in Mac OS X 10.6.3.
Darwin January 19, 2010 Darwin