I have two physical interface connected to solaris box.
I have added these interfaced under a same IPMP group "IPMP1"
After that I have configured a test address for e1000g1 like below
Then I tested the failover using
Now, I added a test address e1000g2:1 to NIC e1000g2, when I tried failover it says
Offline failed as there is no other functional interface available in IPMP group for failover.
Moderator's Comments:
Code tags please
I am not sure is this the desired behaviour or not?
Please share your opinion.
I am running on Solaris 10 x86 box.
Thanks,
Praveen
Last edited by jim mcnamara; 06-06-2016 at 11:55 AM..
Reason: code tags
Hi -
I am fairly new with unix. I have a unix box, installed with Solaris 2.8. I can get the box hooked up to the internet, not using DHCP but static IP address behind a Linksys firewall. However, I cannot telnet to the unix box or from within the unix box. If I telnet from a windows... (8 Replies)
Hi,
based on your experience what is the most common IPMP configuration on a two nodes cluster for HA failover / scalable services?
...active-active, active-standby with probe-based failure detection etc.
Thanks (3 Replies)
Hi,
I've a problem when try to detach nic e1000g1.
IPMP configuration:
# ifconfig -a
...cut...
e1000g1: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 7
inet 0.0.0.0 netmask 0
ether 0:c:29:67:16:ef
e1000g2: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4>... (3 Replies)
Hi all,
Currently i got a server which had two interface. I had study the <SystemAdministration Guide: IP> but still donno what is the correct step to configure it. Can u all help me on it? thanks
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index... (6 Replies)
Dear All,
I have configured IPMP in one of my SUN machine which is having solros 9 version. I have updated all files like /etc/hosts,/etc/hostname.ce0 and /etc/hostname.ce1 and rebooted the server. But IP's are not mounted which i have given in /etc/hosts file.
Please find the below ifconfig... (6 Replies)
Hi All,
Need your help to explaining why when i configure 2 interface IPMP active-standby appear, INACTIVE and DEPRECATED parameter, detail screen shoot as below :
root@machine01 # ifconfig -a
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 7
inet... (6 Replies)
Hi all
i had two interface
ce0 and ce5
but when i run the ifconfig, it show me alot of extra virtual interface, may i know how to remove it?
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
ce0:... (2 Replies)
Hi Guys,
This is a general question relating to the building of VIO servers;
It has been a long time since I have done any serious AIX work, AIX 4.3 was new and I was for the most part working with 3.2.2 on older RS6000 kit.
So to the current day, I'm about to take delivery of some new tin... (11 Replies)
Discussion started by: gull04
11 Replies
LEARN ABOUT XFREE86
install-solaris
install-solaris(1M)install-solaris(1M)NAME
install-solaris - install the Solaris operating system
SYNOPSIS
install-solaris
install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation,
install-solaris invokes either a text-based installer or a graphical installer.
The following minimum requirements for physical memory dictate which features are available during installation:
For SPARC machines:
128 MB
Minimum physical memory for all installation types
128 MB
Minimum physical memory required for windowing system
384 MB
Minimum physical memory required for graphical-based installation
For x86 machines:
256 MB
Minimum physical memory for all installation types
256 MB
Minimum physical memory required for windowing system
512 MB
Minimum physical memory required for graphical-based installation
In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea-
tures available.
install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more
details.
install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
installation media. Refer to the for disk space requirements.
Refer to the for more information on the various menus and selections.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcdrom (Solaris instal- |
| |lation media) |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
pkginfo(1), install(1M), pkgadd(1M), attributes(5)
It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.
23 Sep 2005 install-solaris(1M)