Well a major hurdle is now overcome, and with this major hurdle a major version increase too.
It is extremely difficult to do automatic external range switching from a MONO mic input and STEREO earphone outputs, (it is possible however).
I have instead decided upon a simpler way, manually alter the amplifier hardware to the required volts per division and then enter the range from the 'COMMAND:-' window.
(Although nothing will happen this will _work_ in DEMO mode too.)
This setting is NOT saved in the AudioScope.config file and will always re-start in 'Uncalibrated' vertical axis mode.
AudioScope.sh can now be calibrated in the vertical axis but only in the AC condition.
It can now be considered finshed for the AC mode from around 100Hz to 10KHz or within the limits of the microphone audio input passband.
The full details are now in the manual, coding is already catered for and the AudioScope.manual is now AC complete - hopefully... ;o)
AudioScope.sh, AudioScope.config and AudioScope.manual are now saved inside the '$HOME' directory. The remaining files, all 21 of them are saved in the '/tmp/' directory.
The image is in DEMO mode with a pseudo-Voltage range of 100mV per division...
Stats so far...
# Total Lines=4204.
# Blank Lines=29.
# Code Lines=1986.
# Comments=2189, (including the builtin Manual).
# Filesize=175684 bytes.
Hi,
I am stuck while developing a shell sub-routine which checks the log file for "success" or "failure". The subroutine reads the log file and checks for key word "success", if found it set the variable (found=1). It returns success or failure based on this variable.
My problem is, I can... (2 Replies)
Hi,
I am new to unix and using linux 7.2. I would like to create a script that would make it easyer for me to run my java programms. At the moment I have to type java myJavaprogram
I am trying to write a script that will allow me to type something like this "myscript myJavaprogram" or maybe... (4 Replies)
hi all,
i'm using the following script,
Status=1
Function_do ()
{
while read line;
do
if ; then
#echo $line
if ; then
Status=0
echo " LINKINK ERROR "
fi
fi
done < ldd.log
}
Function_do (4 Replies)
Hi All,
I would like to develop a shell script for stop & start an application server (1-4) on Solaris box. Here are the user requirements for this task.
1. User will input the option which server they wish to stop.
2. Will clear cache files from specific location.
3. ... (1 Reply)
The scope of the shell/perl script is to read the input text file. Validate the expiry date of each certificate and send the mail to the user. The user takes action to add the new certificate to the storage file and user owns the responsibility to update the input text file with the new certificate... (5 Replies)
Hi,
Pleasse could someone advise why i'm getting this error below - No such file or directory
dev6:$ ls -ltr ReleaseManagement.sh
-rwxr-xr-x 1 dev fix 4830 Aug 22 11:13 ReleaseManagement.sh
dev6:$ ./ReleaseManagement.sh
: No such file or directory
dev6:$
thank you (2 Replies)
This site is the first to get this snippet.
It will capture an audio recording of any time length within the limits of OSX's QuickTime Player's capablility...
A shell script derivative of this will be used as a further capture for CygWin's AudioScope.sh.
Thoroughly read ALL the comments in... (0 Replies)
Hi,
I want 10000+ unique Audio file of approx 2MB each. How can i generate numerous audio files using shell script. Any tool, command or suggestions are welcome.
If i give one audio seed file then can we create numerous unique files with same seed file?
Any help is highly appreciable.... (11 Replies)
Hi all...
Well I have not been inactive but working out how to make OSX 10.14.x command line audio player have a variable sample rate.
This is a back door as afplay does not have a sample rate flag unlike aplay for ALSA, in Linux flavours.
This is a DEMO only but a derivative of it will... (2 Replies)
Discussion started by: wisecracker
2 Replies
LEARN ABOUT MOJAVE
cam
cam(1) General Commands Manual cam(1)NAME
cam - CPU'S AUDIO MIXER for Linux
SYNOPSIS
cam [-v x,y] [--volume x,y] [-b x,y] [--bass x,y] [-t x,y] [--treble x,y] [-s x,y] [--synth x,y] [-p x,y] [--pcm x,y] [-S x,y]
[--speaker x,y] [-l x,y] [--line x,y] [-m x,y] [--mic x,y] [-c x,y] [--cd x,y] [-M x,y] [--mixer x,y] [-a x,y] [--altpcm x,y] [-r
x,y] [--reclev x,y] [-i x,y] [--igain x,y] [-o x,y] [--ogain x,y] [-l1 x,y] [--line1 x,y] [-l2 x,y] [--line2 x,y] [-l3 x,y] [--line3
x,y] [-3d 1|0] [--3dse 1|0] [-agc 1|0] [--agc 1|0] [-h] [-?] [--help] [-get] [-save] [-getfile filename] [-savefile filename]
xcam
DESCRIPTION
This is an audio mixer for Linux. You have the choice to use it with an interface or at the command line.
OPTIONS
When using the interface you can use the following keys :
LEFT ARROW
decrease the volume of the current device.
RIGHT ARROW
increase the volume of the current device.
UP ARROW
go to previous device.
DOWN ARROW
go to next device.
L locks or unlocks :
unlocked : you can control the left and right channel
separately.
lock : left and right channel are controlled together.
R turn on/off recording mode :
red lamp : recording turned on
green lamp : recording turned off
3 turn on/off 3D Stereo Enhancement (3DSE) device :
when turned on green indicator 3D will be lit at the left side of main volume handle.
A turn on/off microphone Automatic Gain Control :
when turned on green indicator AGC will be lit at the left side of microphone volume handle.
S save the settings of ALL devices in a file ($HOME/.camrc)
G loads the saved settings and restores them.
H shows the help screen.
Q/ESC exits the program and returns to shell.
NOTE: you can use upper or lower case.
When using the command line options the interface is not shown.
The following options are available :
-v, --volume x,y
Set 'volume' to x (left) and y (right)
-b, --bass x,y
Set 'bass' to x (left) and y (right)
-t, --trebble x,y
Set 'treble' to x (left) and y (right)
-s, --synth x,y
Set 'synth' to x (left) and y (right)
-p, --pcm x,y
Set 'pcm' to x (left) and y (right)
-S, --speaker x,y
Set 'speaker' to x (left) and y (right)
-l, --line x,y
Set 'line in' to x (left) and y (right)
-m, --mic x,y
Set 'microphone' to x (left) and y (right)
-c, --cd x,y
Set 'CD in' to x (left) and y (right)
-I, --imix x,y
Set 'mixer' to x (left) and y (right)
-a, --altpcm x,y
Set 'altpcm' to x (left) and y (right)
-r, --reclev x,y
Set 'record level' to x (left) and y (right)
-i, --igain x,y
Set 'input gain' to x (left) and y (right)
-o, --ogain x,y
Set 'output gain' to x (left) and y (right)
-l1, --line1 x,y
Set 'line 1' to x (left) and y (right)
-l2, --line2 x,y
Set 'line 2' to x (left) and y (right)
-l3, --line3 x,y
Set 'line 3' to x (left) and y (right)
-3d, --3dse 1|0
Set 3D Stereo Enhancement to 1 (on) or 0 (off)
-agc, --agc 1|0
Set Automatic Gain Control for microphone to 1 (on) or 0 (off)
-get restore the saved values from $HOME/.camrc
-save save the values to $HOME/.camrc
-getfile filename
restore the saved values from file 'filename'
-savefile filename
save the values to file 'filename'
-h, -?, --help
displays help
NOTE: x and y are in range from 1 to 100. Higher or lower numbers are
ignored.
BUGS
None known as yet. If you find one, please let me know.
AUTHOR
Jan 'TWP' VANDENBERGHE <jvdbergh@uia.ua.ac.be>
cam(1)