Before you start resyncing ensure that c0t2d0s0 and c0t3d0s0 are equal in size!
The suggested command is if you have an additional new disk (that is very unlikely to ever be the case).
For in-place replacement use
It will automatically resync.
Just reading you have tried that. I guess the c0t2d0 disk has a bad sector i.e. is broken. Because only the vol manager software has detected the fault it would have to change the disk LED but this feature is not implemented.
Last edited by MadeInGermany; 06-02-2016 at 04:18 AM..
Being somewhat extremely new to Unix, I have just had a system crash
One of my Volume Groups has crashed
However, this Volume Group is actually mirrored
How do I switch to use the mirrored copy?
Any assistance greatly appreciated
Thanks (1 Reply)
I have 2 drives on a sun solaris 8 server that is a live server. I am putting in an additional 2 drives and want to mirror the the first 2. I was thinking of using disksuite but one drive is the root drive with 1 maybe 2 free paritions. The other is only one partition (36G). I was wondering... (2 Replies)
Hello,
I've got 2 system disks (hdisk0 and hdisk1) in the mirror (RAID1) on AIX 5.3. Since the hdisk1 makes some troubles, we want to replace it with the new one. How can I disable this hdisk1 disk and prepare the mirror to use the new physical disk? As far as I know, I must remove disk from the... (3 Replies)
Hi,
I want to know if one disk is failed in mirror in solaris and system is booted from another disk, is it possible to find out from which disk system is booted at command level? (1 Reply)
I have a SUN 440 running Solaris 8 that is generating funny errors on /dev/dsk/c1t0d0 and I would like to dupe the drive(the non offending drives are removed for this process), swap it with the dupe and reboot. From what I have read, the process seems simple:
dd if=/dev/dsk/c1t0d0... (1 Reply)
Hi all
I wish to mirror for the root disk, but last time i do, make the server cannot boot up. :p So this time, hope you guys can assist me on it. =)
At the last code, is the step i wish to do. Please help to check and correct me if got any wrong.
root@leo # format </dev/null
Searching for... (17 Replies)
Long time Linux, relatively new to Solaris.
Currently I have a Solaris 9 machine which has a mirrored root disk. We will be running some tests on this machine, and when those tests are done we want to restore it to "pre-test" status.
What I would like to do is break the mirror, pull the first... (2 Replies)
hello folks,
I have a 300GB ROOTVG volume groups with one filesystem /backup having 200GB allocated space
Now, I cannot alt disk clone or mirrorvg this hdisk with another smaller disk. The disk size has to be 300GB; I tried alt disk clone and mirrorvg , it doesn't work. you cannot copy LVs as... (9 Replies)
what is the difference between DRD and Root Mirror Disk using LVM mirror ? (3 Replies)
Discussion started by: maxim42
3 Replies
LEARN ABOUT OSF1
volrootmir
volrootmir(8) System Manager's Manual volrootmir(8)NAME
volrootmir - Mirror areas necessary for booting to a new disk
SYNOPSIS
/usr/sbin/volrootmir [-a] [nconfig=count] target_disk [swap=target_partition]
OPTIONS
Specifies that all volumes on the system disk be mirrored, not just the root and swap volumes, rootvol and swapvol.
DESCRIPTION
The volrootmir script causes a mirror copy of areas of the root disk involved in booting to be made on the specified target disk.
When used without the -a option, volrootmir adds mirrors of the root and swap volumes and allocates them on the new disk. In addition, all
disk regions required for booting are set up and partitions for the new volume mirrors are created.
When used with the -a option, volrootmir mirrors all in-use partitions on the system disk.
To mirror a swap volume that is on a separate disk from the root volume, the swap attribute must be used to specify a separate target for
the swap mirror.
The target disk(s) must be at least as large as the sum of the sizes of rootvol and swapvol. Also, the physical disk should not have any
disk partition in use.
This script can be called from the voldiskadm menus by choosing the Mirror volumes on a disk operation.
ATTRIBUTES
Specifies the number of log copies and copies of the configuration database, for example, nconfig=2. Specifies that the swap volume,
swapvol, be mirrored on a separate disk, as specified by target_partition.
EXAMPLES
The following command mirrors the rootvol and swapvol volumes onto the target disk, dsk3. This command will fail if swapvol is on a differ-
ent disk from rootvol.
# volrootmir dsk3 The following command mirrors rootvol, swapvol, and any other volumes on the root disk onto the target disk, dsk3.
This command will fail if swapvol is on a different disk from rootvol.
# volrootmir -a dsk3 The following command mirrors rootvol on disk dsk3, swapvol onto partition dsk7d, and any other volumes on the
root disk onto disk dsk3. This command will fail if swapvol is on the same disk as rootvol.
# volrootmir -a dsk3 swap=dsk7d The following command mirrors rootvol onto disk dsk3 and swapvol onto partition dsk7d. This command
will fail if swapvol is on the same disk as rootvol.
# volrootmir dsk3 swap=dsk7d
SEE ALSO volintro(8), voldiskadm(8)volrootmir(8)