Sponsored Content
Operating Systems Solaris Virtual Switch in Solaris LDOM Post 302974021 by praveensharma21 on Wednesday 25th of May 2016 03:05:36 AM
Old 05-25-2016
Lightbulb

Quote:
Originally Posted by Peasant
Code:
ldm add-vnet vnet0 primary-vsw0 uatenv

You will now have net0 inside your ldom uatenv which is using primary-vsw.
Of course, you will still need to add disk devices.

In case of card/port failure or a switch failure, all the ldoms will lose network connectivity.

Hope that helps.
Best regards
Peasant.
Thanks for your reply.
Eventually I figured out the solution.

Here it is..
1. Add a new virtual switch
2. Plumb the interface
3. Assign IP and up the interface
4. Modify the existing vnet so that it can listen the new virtual switch
ldm set-vnet vswitch= primary-vsw1 vnet0 ldom03

vnet0 is interface for old switch.

Later after doing tests, I will again set vnet0 to old switch.

I hope it should work.

Thanks for your help.
 

8 More Discussions You Might Find Interesting

1. Solaris

Installing Solaris into LDom using DVD

Hi, I have issues installing Solaris into a LDom using a Solaris10u5/08 DVD. I have been troubleshooting for the past 2 days and I still cannot get it up. Here is the logs: root@eld-app2# ldm add-vdsdev /cdrom/sol_10_508_sparc/s0 cdrom0@primary-vds0 root@eld-app2# ldm add-vdisk cdrom0... (4 Replies)
Discussion started by: bolasutra
4 Replies

2. Solaris

Change hostID of Solaris 10 virtual/guest machine installed by Virtual Box 4.1.12 on Windows-XP host

Trying to set or modify the randomly set hostID of a Solaris 10 virtual/guest machine that I installed on a Windows-XP host machine (using Virtual Box 4.1.12). I was able to set/modify the hostname of the Solaris 10 virtual/guest machine during installation as well as via the Virtual Box... (4 Replies)
Discussion started by: Matt_VB
4 Replies

3. Solaris

ZFS LDOM problem on Solaris 10

Apologies if this is the wrong forum.. I have some LDOMs running on a Sparc server. I copied the disk0 file from one chassis over to another, stopped the ldom on the source system and started it on the 2nd one. All fine. Shut it down and flipped back. We then did a fair bit of work on the... (4 Replies)
Discussion started by: tommyq
4 Replies

4. Solaris

How can I install Solaris 10 on an LDom using an iso?

Hello, I am trying to install Solaris 10 on a newly created LDom. Here are the commands I ran to create the LDom: ldm add-domain ldg2 ldm add-vcpu 8 ldg2 ldm add-memory 2g ldg2 ldm add-vnet vnet2 primary-vsw0 ldg2 ldm add-vdsdev /dev/dsk/c0t5000CCA01535E20Cd0s0 vol2@primary-vds0 ldm... (8 Replies)
Discussion started by: bstring
8 Replies

5. Solaris

Virtual disks are not showing up in LDom

I have an Oracle VM set up with 1 virtual disk. I am trying to add 2 new disks to it. I was able to successfully add 1 (it appears when I run "format" in the VM) but when I add the second and third disks they do not appear in my VM. Here are the commands I ran: ldm add-vdsdev... (3 Replies)
Discussion started by: unblockable
3 Replies

6. Solaris

LDOM Solaris 11 add Network vsw (Virtual switch)

hello, I have a problem when configuring the network at the LDOM level, on a SPARC-Enterprise-T5120 machine The network goes through VLAN 503 (level, network tagget) And I need to give network to the guest domain: madarrwebsol10 I hope someone can bring some light .... Excuse my English ... ... (4 Replies)
Discussion started by: Wittman
4 Replies

7. UNIX for Beginners Questions & Answers

How to create a virtual switch from 2x10g card to 4 Ldoms?

Hello Guys, Can some help me with a configuration from 2x10g cards to 4 Ldoms and a Vlan configuration, Solaris 11 dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE net0 Ethernet up 1000 full ixgbe0 net1 Ethernet ... (2 Replies)
Discussion started by: roly
2 Replies

8. Solaris

Solaris LDOM IP conflict

I have a Sun T4-1 running Solaris 11.4 with a static IP 192.168.0.183. On this machine is a Solaris 10 LDOM with a static IP of 192.168.0.78. The other day I had to stop the LDOM to do a memory reconfigure. When I rebooted it I got an error that the IP 192.168.0.78 was already in use and so... (4 Replies)
Discussion started by: Michele31416
4 Replies
VDE_PCAPPLUG(1) 					      General Commands Manual						   VDE_PCAPPLUG(1)

NAME
vde_pcapplug - Virtual Distributed Ethernet libpcap cable SYNOPSIS
vde_pcapplug [OPTION]... interface DESCRIPTION
vde_pcapplug is a plug to be connected into a VDE switch. All the data that is catched by the plug is injected into interface and every- thing from that interface is sent in the switch. OPTIONS
-p, --port=portnum It is possible to decide which port of the switch to use. When this option is not specified the switch assigns the first available unused port (if any). It is possible to connect several cables in the same switch port: in this way all this cables work concur- rently. It means that packet can result as duplicate but no ARP table loops are generated. Is useful when vde is used for mobil- ity. Several physical interfaces can be used at a time during handoffs to prevent hichups in connectivity. -g, --group=group group ownership of the communication socket. For security when more want to share a switch it is better to use a unix group to own the comm sockets so that the network traffic cannot be sniffed. -m, --mod=octal-mode octal chmod like permissions for the comm sockets -s, --sock=socket specify the UNIX socket to be used by local programs for joining the VDE. The default value is "/tmp/vde.ctl". -d, --daemon start vde_plug2tap as a background process -P, --pidfile=pidfile put the process ID of vde_plug2tap in pidfile. Can be used with --daemon to store the PID for future killing. -h, --help show a brief help NOTICE
Virtual Distributed Ethernet is not related in any way with www.vde.com ("Verband der Elektrotechnik, Elektronik und Informationstechnik" i.e. the German "Association for Electrical, Electronic & Information Technologies"). SEE ALSO
vde_switch(1), vde_plug(1), vdeq(1), dpipe(1). AUTHOR
VDE is a project by Renzo Davoli <renzo@cs.unibo.it> Virtual Distributed Ethernet August 20, 2008 VDE_PCAPPLUG(1)
All times are GMT -4. The time now is 02:18 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy