No Answers at all, no problem I manage to find out the answers which are near to accurate,
FIRMWARE:
For RX,
For RP,
The values we are getting For
RX:4.04
RP:46.34
are same values when we run sysrev at MP
We can consider this value as System Firmware Version.
KERNEL VERSION:
In HP-UX there is no separate kernel version like linux and solaris, here the kernel version is same as OS version. Which can be simply retrieve by
PATCH VERSION:
if we need to answer that what is the patch version of your HP-UX system, then we can answer as B.11.23.0609
Last edited by anuragr; 04-22-2016 at 01:15 AM..
Reason: further info
Hi all,
anyone know what should be the kernel version for red hat linux enterprise 3 update 3 .
I have installed kernel version is 2.4.21-4 and some says that it may not be the red hat linux enterprise 3 update 3 .
:o
thanks
Bert (4 Replies)
I am new to UNIX (about a year) and learning as fast as I can. I am an instructor teaching UNIX and have two labs with Ultra 10 333 MHz, Sun Blade 1000 1 GHz, Blade 100, and Two Enterprise 250 Servers. We are currently teaching our classes using the Solaris 2.10 OS, downloaded in May 2006, I am not... (7 Replies)
Hi all,
I have an H80 that I'm migrating to 5.3 and prior to doing so it needed the firmware upgraded. I don't have copies of the old firmware that was on it since I was not the one who installed it and there were no copies to be found on the server itself. I installed the latest version and... (4 Replies)
Hi all:
I have a need to down-rev my AIX HBA firmware due to storage instability after upgrading, but IBM support only makes the latest version of firmware available for download.
Can anyone provide pointer/tips for obtaining old HBA firmware ?
Specifics:
280B HBA
df1000fa driver... (1 Reply)
All,
I need to upgrade my HMC from version 7.3.4 to vervion 7.3.5. The HMC has a Machine type of 7310-CR2 Xseries 335 . Where could I download the firmware for such hardware (HMC Machine type of 7310-CR2 Xseries 335 )? Please answer because I need to upgrade that HMC the HMC to bring to... (3 Replies)
Hi All
I have the below information ...
and I want to know how to get the lats Kernel version ?
and is this Kernel version SunOS 5.10 Generic_147440-13 last version or what ?
-
Hostname: server1
Release: 5.10
Kernel architecture: sun4u
Application architecture: sparc
Hardware... (1 Reply)
Guys,
How to find OS version and firmware version in LINUX?
Like in AIX.
uname -a will show me the version 5.3, 6.1,7.1.
lsmcode -c will show me - system firmware image as SF240_417.
What are the similar commands in Linux.
I checked uname -a and cat /etc/release.
uname... (1 Reply)
Discussion started by: ElizabethPJ
1 Replies
LEARN ABOUT DEBIAN
usbprog
USBPROG(1) USBprog USBPROG(1)NAME
usbprog - Programmer for the USBprog hardware
SYNOPSIS
usbprog [options] [commands]
DESCRIPTION
USBprog has two modes: An interactive mode and a batch mode. Both mode use exactly the same commands. As every command takes a fixed number
of arguments, no separator is necessary between commands -- just specify as much commands as you would like to execute.
The help command gives a list of all commands, ? command can be used to get help for a specific command. Example:
(usbprog) help
(usbprog) ? upload
OPTIONS
Following options can be specified, both for the interactive and the batch mode:
-h | --help
Prints a short help.
-v | --version
Prints the version number to standard output.
-d | --datadir datadir
Uses datadir instead of ~/.usbprog.
-o | --offline
Don't try to connect to the internet. Use the cached firmware and index file(s) only.
-D | --debug
Enable debugging output.
COMMANDS
This section describes all commands. As mentioned above, the syntax is the same for interactive and batch usage.
help This just prints an overview about every command, i.e. the command name and an one-sentence description.
helpcmd | ? command
Print a detailed description for command.
exit | quit
Quit the program. On Unix, you can also send an EOF by pressing Ctrl-d on your terminal.
copying | license
Prints a short license (GPL) text and the version number of the program.
list | firmwares
Prints a list of available firmwares. A [*] shows that the firmware is available in the offline cache.
download firmware
Downloads the specified firmware. Use the same string as you retrieved from the firmwares command described above. This command
doesn't work in offline mode.
info firmware
Shows some basic information about firmware like what it does, the latest version number, the author and the USB ID which the
USBprog device has after this firmware has been uploaded. See also the pins command.
pins firmware
This shows the PIN assignment of firmware and the meaning of the LED and jumpers. See also the info command for basic information
about the firmware.
cache clean | delete
clean deletes all old firmware versions from the firmware cache, i.e. if the latest version of a firmware is 5, then it deletes the
versions 0 to 4 if they are still on disk. The delete command deletes the whole firmware cache. Only the index and history file are
in the cache directory after executing this command.
devices
Shows a list of connected USB devices related to USBprog. The currently used update device an be set with device and is also marked
in the output.
device number | name
Sets the update device for the upload command. You have to use the integer number or the device name you retrieved from the devices
command.
upload firmware | file
Uploads a new firmware. The firmware identifier can be found with the list command. Alternatively, you can also specify a file name
on the disk. The extension doesn't matter.
FILES
~/.usbprog/version.xml
Index file, downloaded from http://www.ixbat.de/usbprog/versions.xml.
~/.usbprog/history
The saved readline(1) history.
~/.usbprog/*
The rest in that directory are firmware files. The naming scheme is name.version.
AUTHOR
The USBprog program and documentation has been written by Bernhard Walle <bernhard@bwalle.de>.
SEE ALSO usbprog-gui(1), http://www.embedded-projects.net/index.php?page_id=135
0.2.0 2010-01-04 USBPROG(1)