Solaris x86 11.3 'live' DVD, network issue Post: 302971442

8 More Discussions You Might Find Interesting

1. Solaris

Problem mounting DVD on Solaris 10 (x86)

I have just installed Solaris 10. I have read various threads on how to mount CDs put can't get mine going. My Sony DVD RW-U14A is attached to IDE2 as the master. If I type iostat -En I get c1t0d0 soft errors 0 hard errors 0 transport errors 0 Vendor Sony Product DVD RW-U14A Size 0Gb etc....

2. Solaris

Getting a solaris x86 box on my network.

How would i get my solaris 10 box to run on my network?

3. Solaris

sol10 on x86 -> network issue

i've decided to try out an x86 system with sol10. however, i can't get my 3com 3C905TX-B to work. i checked the hcl and it says it runs natively. anyone having similar issues or seen a fix for this? i'll be happy to supply more info. Note: i do not see this in /etc/path_to_inst. so it looks like...

4. UNIX for Dummies Questions & Answers

How can I install Solaris 10 x86 on a machine without a DVD drive?

How can I install Solaris 10 x86 on a machine without a DVD drive? Is there a way to boot from a flash stick or install it through a network? Any help will be appreciated.

5. Solaris

Installing Solaris x86 through an external DVD drive through the USB port...

Is there a way to install Solaris 10 x86 with an external DVD drive that connects through the USB port? I would think I would run GRUB off of a floppy disk and somehow use that to make it look to the USB port to boot from but I don't know how to do that. Can anyone help me out?

6. Red Hat

Fedora 16 (i686) DVD boot issue in x86 (32bit)

Hi, I'm using fedora for 5 years. recently i decided to install new version (16). after i reboot the computer and want to boot from dvd nothing happen's and system boot's from hard disk (i have setup the bios to directly boot from dvd-rom and my dvd-rom is ok). i have downloaded (again) fc16 dvd...

7. Solaris

Boot Solaris 10 U1 for x86 from DVD

Is it possible to boot an existing Solaris 10 update 1 from boot dvd that I run on p3(1 ghz -512 mb ram). I have got a dual boot sys - the other os is win xp that I need to reinstall but that removes the mbr so, is there any way to recover mbr after the installation of xp? Thanks.

8. UNIX for Beginners Questions & Answers

Solaris Live Media x86 Install

Unix Buddies Burned download to DVD-R. Booted it. It dropped me at a command line. Is it working properly? Thanks!

LEARN ABOUT FREEBSD

usb_template

USB_TEMPLATE(4) 					   BSD Kernel Interfaces Manual 					   USB_TEMPLATE(4)

NAME

     usb_template -- USB templates

SYNOPSIS

     To compile this module into the kernel, place the following line in your kernel configuration file:

	   device usb_template

     To load the module at boot time, place the following line in loader.conf(5):

	   usb_template_load="YES"

DESCRIPTION

     The usb_template module implements various USB templates that are needed when programming an USB device side driver.  A USB template consists
     of an USB device descriptor, one or more USB configuration descriptors, one or more USB interface descriptors, one or more USB endpoint
     descriptors, USB strings and additional USB descriptors.  The USB template module currently has templates for USB Mass Storage, USB CDC Eth-
     ernet and Message Transfer Protocol.  USB templates are currently selected using the "hw.usb.template" sysctl.  The "hw.usb.template" value
     can be changed at any time, but will not have any effect until the USB device has been re-enumerated.

SEE ALSO

     usb(4)

STANDARDS

     The usb_template module complies to the USB 1.0, 2.0 and 3.0 standard.

HISTORY

     The usb_template module was written by Hans Petter Selasky <hselasky@FreeBSD.org>.

BSD
								  March 18, 2014							       BSD