Grep strings on multiple files and output to multiple files
Hi All,
I want to use egrep on multiple files and the results should be output to multiple files. I am using the below code in my shell script(working in Ksh shell). However with this code I am not attaining the desired results.
The above code is resulting 2 files 'test1' and 'test2' whereas 'test1' does not contain anything in it(its empty file). 'test2' contains values of '/path/file2' whereas 513,519,532 records were ignored.
I want my results should be like below:
‘test1' should contain values of ‘/path/file1' whereas 513,519,532 records should be ignored. And ‘test2' should contain values of ‘/path/file2' whereas 513,519,532 records should be ignored.
Can anyone of you suggest me any solution on this ?
Hi guys,
say I have a few files in a directory (58 text files or somthing)
each one contains mulitple strings that I wish to replace with other strings
so in these 58 files I'm looking for say the following strings:
JAM (replace with BUTTER)
BREAD (replace with CRACKER)
SCOOP (replace... (19 Replies)
Hi,
I'd like to process multiple files. For example:
file1.txt
file2.txt
file3.txt
Each file contains several lines of data. I want to extract a piece of data and output it to a new file.
file1.txt ----> newfile1.txt
file2.txt ----> newfile2.txt
file3.txt ----> newfile3.txt
Here is... (3 Replies)
Hi,
I will use below command for grep single string ("osuser" is search string)
ex: find . -type f | xarg grep -il osuser
but i have one more string "v$session"
here i want to grep in which file these two strings are present.
any help is appreciated,
Thanks in advance.
Gagan (2 Replies)
Hi!
I'm new in awk and I need some help.
I have a folder with a lot of files and I need that awk do something in each file and print a new file with the output. The input file name should be modified when I print the outpu files.
Thanks in advance for help!
:-)
ciao (5 Replies)
Hi all,
I'll like to search a list of tems in a huge file and then output each of the terms to individual files. I know I can use grep -f list main.file to search them but how can I split the output into individual files? Thank you. (6 Replies)
I have a list of files all over a file system e.g.
/home/1/foo/bar.x
/www/sites/moose/foo.txtI'm looking for strings in these files and want to replace each occurrence with a replacement string, e.g.
if I find: '#@!^\&@ in any of the files I want to replace it with: 655#@11, etc.
There... (2 Replies)
Hi, every one!
I have a file with multiple strings.
file1
ATQRGNE
ASQGVKFTE
ASSQYRDRGGLET
SPEQGARSDE
ASSRDFTDT
ASSYSGGYE
ASSYTRLWNTGE
ASQGHNTD
PSLGGGNQPQH
SLDRDSYNEQF
I want to grep each string in hundreds of files in the same directory, further, I want to find out the string... (7 Replies)
Dear All,
I am trying to write a Unix Script which fires a sql query. The output of the sql query gives multiple rows. Each row should be saved in a separate Unix File.
The number of rows of sql output can be variable. I am able save all the rows in one file but in separate files.
Any... (14 Replies)
Discussion started by: Rahul_Bhasin
14 Replies
9. Post Here to Contact Site Administrators and Moderators
Hi All,
I am trying to redirect the grep output to multiple files, can you please help with that.
Below is the command im using to match my pattern
grep \<proxyType\>$PxyType $DIR/EndureFiles.json > File_Name*.json
Note : $DIR and $PxyType is already defined in my script
Im able... (0 Replies)
I need to grep multiple strings from a particular file.
I found the use of egrep "String1|String2|String3" file.txt | wc-l
Now what I'm really after is that I need to separate word count per each string found. I am trying to keep it to use the grep only 1 time.
Can you guys help ?
... (9 Replies)
Discussion started by: nms
9 Replies
LEARN ABOUT CENTOS
wdmd
WDMD(8) System Manager's Manual WDMD(8)NAME
wdmd - watchdog multiplexing daemon
SYNOPSIS
wdmd [OPTIONS]
DESCRIPTION
This daemon opens /dev/watchdog and allows multiple independent sources to detmermine whether each KEEPALIVE is done. Every test interval
(10 seconds), the daemon tests each source. If any test fails, the KEEPALIVE is not done. In a standard configuration, the watchdog timer
will reset the system if no KEEPALIVE is done for 60 seconds ("fire timeout"). This means that if a single test fails 5-6 times in row,
the watchdog will fire and reset the system. With multiple test sources, fewer separate failures back to back can also cause a reset, e.g.
T seconds, P pass, F fail
T00: test1 P, test2 P, test3 P: KEEPALIVE done
T10: test1 F, test2 F, test3 P: KEEPALIVE skipped
T20: test1 F, test2 P, test3 P: KEEPALIVE skipped
T30: test1 P, test2 F, test3 P: KEEPALIVE skipped
T40: test1 P, test2 P, test3 F: KEEPALIVE skipped
T50: test1 F, test2 F, test3 P: KEEPALIVE skipped
T60: test1 P, test2 F, test3 P: KEEPALIVE skipped
T60: watchdog fires, system resets
(Depending on timings, the system may be reset sometime shortly before T60, and the tests at T60 would not be run.)
A crucial aspect to the design and function of wdmd is that if any single source does not pass tests for the fire timeout, the watchdog is
guaranteed to fire, regardless of whether other sources on the system have passed or failed. A spurious reset due to the combined effects
of multiple failing tests as shown above, is an accepted side effect.
The wdmd init script will load the softdog module if no other watchdog module has been loaded.
wdmd cannot be used on the system with any other program that needs to open /dev/watchdog, e.g. watchdog(8).
Test Source: clients
Using libwdmd, programs connect to wdmd via a unix socket, and send regular messages to wdmd to update an expiry time for their connection.
Every test interval, wdmd will check if the expiry time for a connection has been reached. If so, the test for that client fails.
Test Source: scripts
wdmd will run scripts from a designated directory every test interval. If a script exits with 0, the test is considered a success, other-
wise a failure. If a script does not exit by the end of the test interval, it is considered a failure.
OPTIONS --version, -V
Print version.
--help, -h
Print usage.
--dump, -d
Print debug information from the daemon.
--probe, -p
Print path of functional watchdog device. Exit code 0 indicates a
functional device was found. Exit code 1 indicates a functional device
was not found.
-D
Enable debugging to stderr and don't fork.
-H 0|1
Enable (1) or disable (0) high priority features such as realtime
scheduling priority and mlockall.
-G name
Group ownership for the socket.
-S 0|1
Enable (1) or disable (0) script tests.
-s path
Path to scripts dir.
-k num
Kill unfinished scripts after num seconds.
-w path
The path to the watchdog device to try first.
2011-08-01 WDMD(8)