I have vmware on my windows PC ( hostname : acer ).
vmware has RHEL 7 ( hostname : rhel7 ) installed recently.
RHEL IP configuration
IP : 192.168.5.128
Netmask : 255.255.255.0
ssh to rhel7 works from acer using putty
resolve.conf
host file of acer has the entry
192.168.5.1 acer
ping to acer from rhel 7 does not work.
Hello
I believe that 192.168.5.1 is your Acer windows PC, and there is no DNS server on it, which are you relies to.
You'll need to set some other DNS server for your Linux server in resolf.conf, for example 8.8.8.8 (Google DNS server).
If you need to be able ping your Acer PC by name from Linux server, you can add this line at /etc/hosts:
I think that you might need to improve your knowledge about DNS a little, this article can help a bit.
Last edited by imort; 04-06-2016 at 02:23 PM..
Reason: Forgot to add a link to article about DNS records
I'm nearly finished my program i've got everything in place and than when i run it it comes back with the reply mv: command not found. This is the code that seems to be causing the problem.
elif
then
echo "There are more than one '$1' files in the system."
echo "Please... (2 Replies)
Hi.
I just installed the HP-UX 11i V2.
I have problems with CDE - it is inoperative (after logon there is a message box: messaging system failure - or something like that, it asks to check /etc/hosts and network settings).
nslookup works by hostname and IP, hostname shown the correct... (7 Replies)
hi folks,
i've got a blank hp visualize C3000 workstation and installed HP-UX 11.11. When I want to start X, I get the following error message:
# X
Fatal server error:
Couldn't open X pointer device! Is one attached?
I've connected an mouse and a keyboard with an usb/ps2 connector.... (5 Replies)
Hi All,
My current setup is:
1x Windows Server (Windows 2000 server)
1x Unix Server
2x Windows machine
3x Unix Terminals (Hostnames = A, B and C)
Problem
The problem iam having is Unix terminal C cannot be ping across by Unix terminal A or B or Unix server by using the hostname. Unix... (1 Reply)
I recently installed Solaris 10 on my Sun workstation. I cannot ping using hostname from another computer on the same network.
But I can ping using the IP address. Also I can ping other systems using their hostnames.
Can anyone give some information regarding how to resolve this issue. (4 Replies)
Hello everyone
I have a partition with a problem with ping.
If I do a ping by ip for example ping 1.1.1.1 I got no problem but If I ping by hostname for example ping partition1 take almost a minute to respond me.
I have Aix 5.3 and I have another 19 partitions with no problem. The only... (5 Replies)
anyone ever seen this problem:
I can ping the server by IP address but I can't by hostname.
nslookup is working and dns query is ok.
# nslookup mwxnsb24
Server: 10.11.49.206
Address: 10.11.49.206#53
Name: mwxnsb24
Address: 10.10.58.175
# ping... (8 Replies)
Hi.
Here is beginning of my script
#!/usr/local/bin/expect --
set timeout 15
spawn /usr/local/account.sh -n modify
expect "Password:" {send "mypassword\r"}
But due to some terminal control sequences (or something else, dunno exactly) my password prompt is looking like this:
and expect... (3 Replies)
Hello, Unix-forums!
My problem:
read -p "Enter any number, please" number
sleep 1
echo $number | tr -d 0-9
test -z $number && echo "Thank you" || echo "This is not a number"Test always displays "This is not a number". It doesn't matter if I entered a or 1.
But if I order
echo... (2 Replies)
Discussion started by: intelinside
2 Replies
LEARN ABOUT DEBIAN
prips
PRIPS(1) BSD General Commands Manual PRIPS(1)NAME
prips -- print the IP addresses in a given range
SYNOPSIS
prips [-c] [-d delim] [-e exclude] [-f format] [-i incr] start end
prips [-c] [-d delim] [-e exclude] [-f format] [-i incr] CIDR-block
prips -h
DESCRIPTION
The prips tool can be used to print all of the IP addresses in a given range. It can enhance tools that only work on one host at a time,
e.g. whois(1).
The prips tool accepts the following command-line options:
-c Print the range in CIDR notation.
-d delim
Set the delimiter to the character with ASCII code delim where 0 <= delim <= 255.
-e <x.x.x,x.x>
Exclude ranges from the output.
-f format
Set the format of addresses (hex, dec, or dot).
-h Show summary of options.
-i incr
Set the increment to 'x'.
ENVIRONMENT
The prips tool's operation is not influenced by any environment variables.
FILES
The prips tool's operation is not influenced by any files.
EXAMPLES
Display all the addresses in a reserved subnet:
prips 192.168.32.0 192.168.32.255
The same, using CIDR notation:
prips 192.168.32/24
Display only the usable addresses in a class A reserved subnet using a space instead of a newline for a delimiter:
prips -d 32 10.0.0.1 10.255.255.255
Display every fourth address in a weird block:
prips -i 4 192.168.32.7 192.168.33.5
Determine the smallest CIDR block containing two addresses:
prips -c 192.168.32.5 192.168.32.11
DIAGNOSTICS
The prips utility exits 0 on success, and >0 if an error occurs.
SEE ALSO ipsc(1), gipsc(1)STANDARDS
No standards were harmed in the writing of the prips tool.
HISTORY
The prips tool was originally written by Daniel Kelly and later adopted by Peter Pentchev. This manual page was originally written by Juan
Alvarez for the Debian GNU/Linux system and later added to the prips distribution and converted to mdoc format by Peter Pentchev.
AUTHORS
Daniel Kelly <dan@vertekcorp.com>
Juan Alvarez <jalvarez@fluidsignal.com>
Peter Pentchev <roam@ringlet.net>
BUGS
Please report any bugs in the prips tool to its current maintainer, Peter Pentchev.
BSD March 1, 2011 BSD