I have a huge set of data that needs to be reformatted.
Here is a simple example to explain the process.
I have number n=5 and a input with many numbers separated with comma:
after the process, the output looks like:
That starts from 1 and end with 5 (max n) with maximum 4 numbers in one line. So, if the n >4, that means we need more lines to print all numbers relating to n. Here, 5 is 4+1; if n goes up to 9, that will be three lines with 4+ 4+1. all these three lines begin with number n and followed by the numbers from the input.
If n is small, we could do it simply by hand. However, if n goes up to 100, it's a nightmare to manipulate.
Thanks so much for your kind help!
Zhen
Here is a link for an input with n=45 and the corresponding output
I have a folder called {homedata}
Within this folder there are 12 subfolders 200601.......200612
Within each subfolder there are 8 sets of files
Each filename commences with A B C D E F G or H,
so {filename}* can be used.
I am trying to write a script which will from the top level
go... (1 Reply)
Hello
I am currently having problems in mapulating a certain file which contains vaious data.
Belos is a sample content
Event=<3190>
Client IP=<151.111.11.143> DNS=<abc.sbc.com> TransCount=<139>
Client IP=<150.222.133.163> DNS=<xyz.yuu.com> TransCount=<3734>
Event=<3120>
Client... (11 Replies)
Hi everyone..
I am new here, hello.. I hope this doesn't come across to you folks as a stupid question, I'm somewhat new to scripting :)
I'm seeking some help in finding a way to manipulate data output for every two characters - example:
numbers.lst contains the following output:... (3 Replies)
i have a file in follwing format
0110
1020
1011
1032
1020
2005
2003
1050
i want the output in such a way that all non zero numbers will be converted into 1
like this
0110
1010
1011
1011
1010
1001
1001
1010 (3 Replies)
Hi all!
my first post here, so mods -- if this should ideally be in the scripts section, please move there. Thanks!
I have data in the following format:
key1:value1 key2:value2 key3:value3
A
B
C
D
key1:value4 key2:value5 key3:value6
A1
B1
key1: ...
and so on
I want an output... (2 Replies)
Dear all
I have a dataset (in text format,delimited by tab) which have 100 variables (say, var0-var99) and more than 100,000 observations. I want to do the following:
1. for variable var0-var49, I want to add "00" in front of each data (for example, "1" would become "001")
2. for variable... (8 Replies)
Hallo Team,
I need to manipulate existing data file. Have a look at current data and expected data:
Current Data:
27873517141
27873540000
27873515109
27873517140
27873540001
27873540000
27873501343
27873540000
27873517140
27873511292
27873645989
27873540000
27873540000... (7 Replies)
Dear Sir,
I have file input
RGR001|108.28|-2.86489|100-120|RANGGAR
RGR002|108.071|-2.69028|80-100|RANNGAR
RGR003|108.168|-2.97053|50-80|RANNGAR
RGR007|108.192722222|-2.766138889|0-50|RANGGARI want to create files by joining each rows with each rows below
Output as below
... (4 Replies)
Hallo Team,
I need your help. I have a file that has two colums. See sample below:
105550 0.28
105550 0.24
125550 0.28
125550 0.24
215650 0.28
215650 0.24
315550 0.28
315550 0.24
335550 0.28
335550 0.24
40555 0.21
40555 0.17
415550 0.21
415550 0.17
43555 0.21
43555 0.17 (5 Replies)
Discussion started by: kekanap
5 Replies
LEARN ABOUT MOJAVE
locale::codes::langext5.18
Locale::Codes::LangExt(3pm) Perl Programmers Reference Guide Locale::Codes::LangExt(3pm)NAME
Locale::Codes::LangExt - standard codes for language extension identification
SYNOPSIS
use Locale::Codes::LangExt;
$lext = code2langext('acm'); # $lext gets 'Mesopotamian Arabic'
$code = langext2code('Mesopotamian Arabic'); # $code gets 'acm'
@codes = all_langext_codes();
@names = all_langext_names();
DESCRIPTION
The "Locale::Codes::LangExt" module provides access to standard codes used for identifying language extensions, such as those as defined in
the IANA language registry.
Most of the routines take an optional additional argument which specifies the code set to use. If not specified, the default IANA language
registry codes will be used.
SUPPORTED CODE SETS
There are several different code sets you can use for identifying language extensions. A code set may be specified using either a name, or
a constant that is automatically exported by this module.
For example, the two are equivalent:
$lext = code2langext('acm','alpha');
$lext = code2langext('acm',LOCALE_LANGEXT_ALPHA);
The codesets currently supported are:
alpha
This is the set of three-letter (lowercase) codes from the IANA language registry, such as 'acm' for Mesopotamian Arabic.
This is the default code set.
ROUTINES
code2langext ( CODE [,CODESET] )
langext2code ( NAME [,CODESET] )
langext_code2code ( CODE ,CODESET ,CODESET2 )
all_langext_codes ( [CODESET] )
all_langext_names ( [CODESET] )
Locale::Codes::LangExt::rename_langext ( CODE ,NEW_NAME [,CODESET] )
Locale::Codes::LangExt::add_langext ( CODE ,NAME [,CODESET] )
Locale::Codes::LangExt::delete_langext ( CODE [,CODESET] )
Locale::Codes::LangExt::add_langext_alias ( NAME ,NEW_NAME )
Locale::Codes::LangExt::delete_langext_alias ( NAME )
Locale::Codes::LangExt::rename_langext_code ( CODE ,NEW_CODE [,CODESET] )
Locale::Codes::LangExt::add_langext_code_alias ( CODE ,NEW_CODE [,CODESET] )
Locale::Codes::LangExt::delete_langext_code_alias ( CODE [,CODESET] )
These routines are all documented in the Locale::Codes::API man page.
SEE ALSO
Locale::Codes
The Locale-Codes distribution.
Locale::Codes::API
The list of functions supported by this module.
http://www.iana.org/assignments/language-subtag-registry
The IANA language subtag registry.
AUTHOR
See Locale::Codes for full author history.
Currently maintained by Sullivan Beck (sbeck@cpan.org).
COPYRIGHT
Copyright (c) 2011-2013 Sullivan Beck
This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
perl v5.18.2 2013-11-04 Locale::Codes::LangExt(3pm)