I have a huge set of data that needs to be reformatted.
Here is a simple example to explain the process.
I have number n=5 and a input with many numbers separated with comma:
after the process, the output looks like:
That starts from 1 and end with 5 (max n) with maximum 4 numbers in one line. So, if the n >4, that means we need more lines to print all numbers relating to n. Here, 5 is 4+1; if n goes up to 9, that will be three lines with 4+ 4+1. all these three lines begin with number n and followed by the numbers from the input.
If n is small, we could do it simply by hand. However, if n goes up to 100, it's a nightmare to manipulate.
Thanks so much for your kind help!
Zhen
Here is a link for an input with n=45 and the corresponding output
I have a folder called {homedata}
Within this folder there are 12 subfolders 200601.......200612
Within each subfolder there are 8 sets of files
Each filename commences with A B C D E F G or H,
so {filename}* can be used.
I am trying to write a script which will from the top level
go... (1 Reply)
Hello
I am currently having problems in mapulating a certain file which contains vaious data.
Belos is a sample content
Event=<3190>
Client IP=<151.111.11.143> DNS=<abc.sbc.com> TransCount=<139>
Client IP=<150.222.133.163> DNS=<xyz.yuu.com> TransCount=<3734>
Event=<3120>
Client... (11 Replies)
Hi everyone..
I am new here, hello.. I hope this doesn't come across to you folks as a stupid question, I'm somewhat new to scripting :)
I'm seeking some help in finding a way to manipulate data output for every two characters - example:
numbers.lst contains the following output:... (3 Replies)
i have a file in follwing format
0110
1020
1011
1032
1020
2005
2003
1050
i want the output in such a way that all non zero numbers will be converted into 1
like this
0110
1010
1011
1011
1010
1001
1001
1010 (3 Replies)
Hi all!
my first post here, so mods -- if this should ideally be in the scripts section, please move there. Thanks!
I have data in the following format:
key1:value1 key2:value2 key3:value3
A
B
C
D
key1:value4 key2:value5 key3:value6
A1
B1
key1: ...
and so on
I want an output... (2 Replies)
Dear all
I have a dataset (in text format,delimited by tab) which have 100 variables (say, var0-var99) and more than 100,000 observations. I want to do the following:
1. for variable var0-var49, I want to add "00" in front of each data (for example, "1" would become "001")
2. for variable... (8 Replies)
Hallo Team,
I need to manipulate existing data file. Have a look at current data and expected data:
Current Data:
27873517141
27873540000
27873515109
27873517140
27873540001
27873540000
27873501343
27873540000
27873517140
27873511292
27873645989
27873540000
27873540000... (7 Replies)
Dear Sir,
I have file input
RGR001|108.28|-2.86489|100-120|RANGGAR
RGR002|108.071|-2.69028|80-100|RANNGAR
RGR003|108.168|-2.97053|50-80|RANNGAR
RGR007|108.192722222|-2.766138889|0-50|RANGGARI want to create files by joining each rows with each rows below
Output as below
... (4 Replies)
Hallo Team,
I need your help. I have a file that has two colums. See sample below:
105550 0.28
105550 0.24
125550 0.28
125550 0.24
215650 0.28
215650 0.24
315550 0.28
315550 0.24
335550 0.28
335550 0.24
40555 0.21
40555 0.17
415550 0.21
415550 0.17
43555 0.21
43555 0.17 (5 Replies)
Discussion started by: kekanap
5 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)