03-18-2016
Ya no worries, I really appreciate you digging into thsi and one of the errors in the subsequent error logs is in fact FCS_ERR6 so please feel free suggest other possibilities along these lines. I googled quite extensively for all of them actually and tried quite a few things but started to ran out so decided to reach on unix.com for further suggestions. I'll try that page but I'll also take out SCST and try another targeting system this weekend to hopefully isolate the issue further. If I still get the same problem, then it would point me to hardware and optionally I will remove the Emulex cards and order some QLogic cards instead. I just would like to get more information before taking out my wallet.
Cheers,
DH
---------- Post updated at 04:09 PM ---------- Previous update was at 04:01 PM ----------
So I read that page:
0x100000, 0x200000, 0x400000, 0x800000, 0x1000000
And already set the fcs0 interface to 0x400000 from day 1 that I had these cards. Earlier I had the LPE10000 cards @ 2GB/s and they showed the same error.
Was looking at this page here:
chaosisme.com blog
to see if there aren't any settables I could try but where as it showed me the /pci listing earlier, this time my power5 doesn't show /pci devices via this firmware. So I'm wondering if this isn't PCI related vs card related.
Cheers,
DH
10 More Discussions You Might Find Interesting
1. Programming
Hi,
After I installed gcc on my machine and issued a command to compile a program, I did
gcc -c 'prog'.c
The object file was created, then I did
gcc -o 'prog' 'prog'.o
Then I got this error message I have been reading man pages and searching the internet but have not been able to... (1 Reply)
Discussion started by: rachael
1 Replies
2. Linux
Dear linuxers,
I'm a novice in C++ programming.
I wrote a ReadFile class in file ReadFile.cpp.
After that, I wrote a test.cpp, which contains a main function, to test whether my class work well.
I follow the following steps to compile the ReadFile.cpp file.
g++296 -c ReadFile.cpp -o... (4 Replies)
Discussion started by: niukun
4 Replies
3. UNIX for Dummies Questions & Answers
Hi all,
This is my first shell script, so I'm hoping the problem is that I'm just missing something, and not something bigger. I have a Java application that I wrote in WSAD that reads data from an Excel file and inserts values into a DB2 database. I'm able to run it successfully in WSAD. I... (4 Replies)
Discussion started by: loveToBlade
4 Replies
4. Shell Programming and Scripting
Hi All
I am quite new to Unix. Following is a shell script that i have written and getting the subject mentioned error.
#!/bin/ksh
#-------------------------------------------------------------------------
# File: ang_stdnld.ksh
#
# Desc: UNIX shell script to extract Store information.... (3 Replies)
Discussion started by: amitsinha
3 Replies
5. Shell Programming and Scripting
#!/bin/bash
while
do
codes
done
it says line 2: [: too many arguments
why? (4 Replies)
Discussion started by: garfish
4 Replies
6. Programming
Hello All,
I've encountered a strange behaviour from g++ that doesn't make sense to me. Maybe you can shed some light on it:
I have a bunch of source files and want to compile them and link them with a static library liba.a located in /usr/local/lib64 into an executable
Approach 1 works... (0 Replies)
Discussion started by: magelord
0 Replies
7. AIX
Hello,
One one of my AIX boxes I'm having the following errror:
fcstat fcs0:
Port Speed (supported): 4 GBIT
Error opening device: /dev/fscsi0
errno: 0000003d
Has anyone encountered similar errors?
Thank you! (1 Reply)
Discussion started by: aixn00b
1 Replies
8. UNIX for Dummies Questions & Answers
Hi everybody,
I read about treads realted to this issue but they did not resovle issue given below.
Please help me resolve issue given below
I have html file under /srv/www/htdocs/actual_folder
ls actual_folder/
test.html
and following link works... (0 Replies)
Discussion started by: newbielgn
0 Replies
9. Solaris
Hi All
I am facing an issue with our new solaris machine.
in /var/adm/messages
root@Prod-App1:/var/tmp#
root@Prod-App1:/var/tmp#
root@Prod-App1:/var/tmp# cat /var/adm//messages
Apr 20 03:10:01 Prod-App1 syslogd: line 25: WARNING: loghost could not be resolved
Apr 20 08:24:18 Prod-App1... (0 Replies)
Discussion started by: javeedkaleem
0 Replies
10. Solaris
Hi All
I am facing an issue with our new solaris machine.
in /var/adm/messages
Apr 22 16:43:05 Prod-App1 in.routed: interface net0 to 172.16.101.1 turned off
Apr 22 16:43:33 Prod-App1 mac: NOTICE: nxge0 link up, 1000 Mbps, full duplex
Apr 22 16:43:34 Prod-App1 mac: NOTICE: nxge0 link... (2 Replies)
Discussion started by: javeedkaleem
2 Replies
LEARN ABOUT REDHAT
capiinit
capiinit(8) System Manager's Manual capiinit(8)
NAME
capiinit - start or stop CAPI-capable ISDN cards
SYNOPSIS
capiinit [OPTIONS] start | stop | show | status | prepare | reload | activate | deactivate
capiinit [OPTIONS] activate|deactivate cardname
capiinit [OPTIONS] activate|deactivate driver [cardname]
DESCRIPTION
capiinit is called with one of the following actions:
start Load all modules and initialize all cards (loading the firmware), which are configured in /etc/capi.conf.
stop Reset all cards and unload modules.
show Show the current configuration.
status Show the current status.
prepare
Load all modules.
activate
Initialize all cards.
activate cardname
Initialize one card (i.e.: c4-ec00).
activate driver [cardnumber]
Initialize one card.
deactivate
Reset all cards.
deactivate cardname
Reset one card (i.e.: c4-ec00).
deactivate driver [cardnumber]
Reset one card.
reload Reset all cards and initialize them again.
Firmware files are searched in this order in the following directories: /usr/share/isdn/`uname -r`, /usr/share/isdn, /usr/lib/isdn,
/lib/isdn.
There is a sample config in /etc/capi.conf.
OPTIONS
-c filename, --config filename
Use filename as config file (default is /etc/capi.conf).
-d, --debug
Save patch values for debugging purposes.
-s, --silent
Don't show status information.
AUTHOR
Manpage written from C source by Paul Slootman <paul@debian.org>, updated by Matthias Klose <m@klose.in-berlin.de>.
capiinit(8)