03-18-2016
Ya no worries, I really appreciate you digging into thsi and one of the errors in the subsequent error logs is in fact FCS_ERR6 so please feel free suggest other possibilities along these lines. I googled quite extensively for all of them actually and tried quite a few things but started to ran out so decided to reach on unix.com for further suggestions. I'll try that page but I'll also take out SCST and try another targeting system this weekend to hopefully isolate the issue further. If I still get the same problem, then it would point me to hardware and optionally I will remove the Emulex cards and order some QLogic cards instead. I just would like to get more information before taking out my wallet.
Cheers,
DH
---------- Post updated at 04:09 PM ---------- Previous update was at 04:01 PM ----------
So I read that page:
0x100000, 0x200000, 0x400000, 0x800000, 0x1000000
And already set the fcs0 interface to 0x400000 from day 1 that I had these cards. Earlier I had the LPE10000 cards @ 2GB/s and they showed the same error.
Was looking at this page here:
chaosisme.com blog
to see if there aren't any settables I could try but where as it showed me the /pci listing earlier, this time my power5 doesn't show /pci devices via this firmware. So I'm wondering if this isn't PCI related vs card related.
Cheers,
DH
10 More Discussions You Might Find Interesting
1. Programming
Hi,
After I installed gcc on my machine and issued a command to compile a program, I did
gcc -c 'prog'.c
The object file was created, then I did
gcc -o 'prog' 'prog'.o
Then I got this error message I have been reading man pages and searching the internet but have not been able to... (1 Reply)
Discussion started by: rachael
1 Replies
2. Linux
Dear linuxers,
I'm a novice in C++ programming.
I wrote a ReadFile class in file ReadFile.cpp.
After that, I wrote a test.cpp, which contains a main function, to test whether my class work well.
I follow the following steps to compile the ReadFile.cpp file.
g++296 -c ReadFile.cpp -o... (4 Replies)
Discussion started by: niukun
4 Replies
3. UNIX for Dummies Questions & Answers
Hi all,
This is my first shell script, so I'm hoping the problem is that I'm just missing something, and not something bigger. I have a Java application that I wrote in WSAD that reads data from an Excel file and inserts values into a DB2 database. I'm able to run it successfully in WSAD. I... (4 Replies)
Discussion started by: loveToBlade
4 Replies
4. Shell Programming and Scripting
Hi All
I am quite new to Unix. Following is a shell script that i have written and getting the subject mentioned error.
#!/bin/ksh
#-------------------------------------------------------------------------
# File: ang_stdnld.ksh
#
# Desc: UNIX shell script to extract Store information.... (3 Replies)
Discussion started by: amitsinha
3 Replies
5. Shell Programming and Scripting
#!/bin/bash
while
do
codes
done
it says line 2: [: too many arguments
why? (4 Replies)
Discussion started by: garfish
4 Replies
6. Programming
Hello All,
I've encountered a strange behaviour from g++ that doesn't make sense to me. Maybe you can shed some light on it:
I have a bunch of source files and want to compile them and link them with a static library liba.a located in /usr/local/lib64 into an executable
Approach 1 works... (0 Replies)
Discussion started by: magelord
0 Replies
7. AIX
Hello,
One one of my AIX boxes I'm having the following errror:
fcstat fcs0:
Port Speed (supported): 4 GBIT
Error opening device: /dev/fscsi0
errno: 0000003d
Has anyone encountered similar errors?
Thank you! (1 Reply)
Discussion started by: aixn00b
1 Replies
8. UNIX for Dummies Questions & Answers
Hi everybody,
I read about treads realted to this issue but they did not resovle issue given below.
Please help me resolve issue given below
I have html file under /srv/www/htdocs/actual_folder
ls actual_folder/
test.html
and following link works... (0 Replies)
Discussion started by: newbielgn
0 Replies
9. Solaris
Hi All
I am facing an issue with our new solaris machine.
in /var/adm/messages
root@Prod-App1:/var/tmp#
root@Prod-App1:/var/tmp#
root@Prod-App1:/var/tmp# cat /var/adm//messages
Apr 20 03:10:01 Prod-App1 syslogd: line 25: WARNING: loghost could not be resolved
Apr 20 08:24:18 Prod-App1... (0 Replies)
Discussion started by: javeedkaleem
0 Replies
10. Solaris
Hi All
I am facing an issue with our new solaris machine.
in /var/adm/messages
Apr 22 16:43:05 Prod-App1 in.routed: interface net0 to 172.16.101.1 turned off
Apr 22 16:43:33 Prod-App1 mac: NOTICE: nxge0 link up, 1000 Mbps, full duplex
Apr 22 16:43:34 Prod-App1 mac: NOTICE: nxge0 link... (2 Replies)
Discussion started by: javeedkaleem
2 Replies
LEARN ABOUT DEBIAN
ne2k-pci-diag
NE2K-PCI-DIAG(8) System Manager's Manual NE2K-PCI-DIAG(8)
NAME
ne2k-pci-diag - EEPROM setup and diagnostic program for PCI NE2000 ethernet cards.
SYNOPSIS
ne2k-pci-diag [options]
DESCRIPTION
ne2k-pci-diag is a program that you can use to diagnose problems with PCI NE200 Enternet adapters. This include cards with RealTek
RTL8029AS, Holtak HT80232 ECON-PCI, Winbond W89c940f and VIA VT86C926 (Amazon) chips.
OPTIONS
These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is
included below.
-h, --help
Show summary of options.
-V, --version
Show version of program.
-v, --verbose
Verbose mode.
-q, --quiet
Be very unverbose.
-a, --show_all_registers
Print all registers.
-# <cardnum>
Use card number <cardnum>.
-e, --show-eeprom
Dump EEPROM contents to stdout.
-E, --emergency-rewrite
Re-write a corrupted EEPROM.
-p, --port-base <port>
Specify port to use.
-F, --new-interface <interface>
Interface number. Options that make sense are: 10baseT, 10base2, AUI, 100baseTx, 10baseT-FDX, 100baseTx-FDX, 100baseT4, 100baseFx,
100baseFx-FDX, MII and Autosense.
-H, --new-hwaddress <address>
Set card to a new hardware address.
-m, --show-mii
Dump MII management registers.
-R, --reset
Reset the transceiver.
-T, --test
Do register and SRAM test.
-w, --write-EEPROM <values>
Write to the EEPROMS with the specified values. Do not use this, if you do not know what you do!
-f, --force-detection
Try to identify the card, even if it is active.
-t, --chip-type <card>
Explicitly set the chip. To get all valid numbers, run ne2k-pci-diag with the options '-t -1'.
SEE ALSO
mii-diag(8)
AUTHOR
ne2k-pci-diag was written and is still maintained by Donald Becker <becker@scyld.com>. This manual page was written by Alain Schroeder
<alain@debian.org>, for the Debian GNU/Linux system (but may be used by others).
February 18, 2002 NE2K-PCI-DIAG(8)