Sponsored Content
Operating Systems AIX Receiving: 4B436A3D 0313233216 T H fscsi0 LINK ERROR Post 302969151 by Devyn on Friday 18th of March 2016 04:09:50 PM
Old 03-18-2016
Ya no worries, I really appreciate you digging into thsi and one of the errors in the subsequent error logs is in fact FCS_ERR6 so please feel free suggest other possibilities along these lines. I googled quite extensively for all of them actually and tried quite a few things but started to ran out so decided to reach on unix.com for further suggestions. I'll try that page but I'll also take out SCST and try another targeting system this weekend to hopefully isolate the issue further. If I still get the same problem, then it would point me to hardware and optionally I will remove the Emulex cards and order some QLogic cards instead. I just would like to get more information before taking out my wallet.

Cheers,
DH

---------- Post updated at 04:09 PM ---------- Previous update was at 04:01 PM ----------

So I read that page:

0x100000, 0x200000, 0x400000, 0x800000, 0x1000000

And already set the fcs0 interface to 0x400000 from day 1 that I had these cards. Earlier I had the LPE10000 cards @ 2GB/s and they showed the same error.

Was looking at this page here: chaosisme.com blog

to see if there aren't any settables I could try but where as it showed me the /pci listing earlier, this time my power5 doesn't show /pci devices via this firmware. So I'm wondering if this isn't PCI related vs card related.

Cheers,
DH
 

10 More Discussions You Might Find Interesting

1. Programming

Link Edit Error, Help!!!!!

Hi, After I installed gcc on my machine and issued a command to compile a program, I did gcc -c 'prog'.c The object file was created, then I did gcc -o 'prog' 'prog'.o Then I got this error message I have been reading man pages and searching the internet but have not been able to... (1 Reply)
Discussion started by: rachael
1 Replies

2. Linux

link error problem

Dear linuxers, I'm a novice in C++ programming. I wrote a ReadFile class in file ReadFile.cpp. After that, I wrote a test.cpp, which contains a main function, to test whether my class work well. I follow the following steps to compile the ReadFile.cpp file. g++296 -c ReadFile.cpp -o... (4 Replies)
Discussion started by: niukun
4 Replies

3. UNIX for Dummies Questions & Answers

Receiving error on Unix server-- java.lang.UnsatisfiedLinkError: registerNatives

Hi all, This is my first shell script, so I'm hoping the problem is that I'm just missing something, and not something bigger. I have a Java application that I wrote in WSAD that reads data from an Excel file and inserts values into a DB2 database. I'm able to run it successfully in WSAD. I... (4 Replies)
Discussion started by: loveToBlade
4 Replies

4. Shell Programming and Scripting

Receiving error: ./ang.ksh[35]: 0403-057 Syntax error at line 116 : `done' is not expected.

Hi All I am quite new to Unix. Following is a shell script that i have written and getting the subject mentioned error. #!/bin/ksh #------------------------------------------------------------------------- # File: ang_stdnld.ksh # # Desc: UNIX shell script to extract Store information.... (3 Replies)
Discussion started by: amitsinha
3 Replies

5. Shell Programming and Scripting

Why am i receiving too many argument error with this?

#!/bin/bash while do codes done it says line 2: [: too many arguments why? (4 Replies)
Discussion started by: garfish
4 Replies

6. Programming

g++ fails to link to static library when compilation and link in single command

Hello All, I've encountered a strange behaviour from g++ that doesn't make sense to me. Maybe you can shed some light on it: I have a bunch of source files and want to compile them and link them with a static library liba.a located in /usr/local/lib64 into an executable Approach 1 works... (0 Replies)
Discussion started by: magelord
0 Replies

7. AIX

Error opening device: /dev/fscsi0

Hello, One one of my AIX boxes I'm having the following errror: fcstat fcs0: Port Speed (supported): 4 GBIT Error opening device: /dev/fscsi0 errno: 0000003d Has anyone encountered similar errors? Thank you! (1 Reply)
Discussion started by: aixn00b
1 Replies

8. UNIX for Dummies Questions & Answers

[Solved] Symbolic link not allowed or link target not accessible

Hi everybody, I read about treads realted to this issue but they did not resovle issue given below. Please help me resolve issue given below I have html file under /srv/www/htdocs/actual_folder ls actual_folder/ test.html and following link works... (0 Replies)
Discussion started by: newbielgn
0 Replies

9. Solaris

/var/adm/messages (interface turned off/restored) and link up & link down message.

Hi All I am facing an issue with our new solaris machine. in /var/adm/messages root@Prod-App1:/var/tmp# root@Prod-App1:/var/tmp# root@Prod-App1:/var/tmp# cat /var/adm//messages Apr 20 03:10:01 Prod-App1 syslogd: line 25: WARNING: loghost could not be resolved Apr 20 08:24:18 Prod-App1... (0 Replies)
Discussion started by: javeedkaleem
0 Replies

10. Solaris

/var/adm/messages (insterface turned off/restored) and link up & link down message.

Hi All I am facing an issue with our new solaris machine. in /var/adm/messages Apr 22 16:43:05 Prod-App1 in.routed: interface net0 to 172.16.101.1 turned off Apr 22 16:43:33 Prod-App1 mac: NOTICE: nxge0 link up, 1000 Mbps, full duplex Apr 22 16:43:34 Prod-App1 mac: NOTICE: nxge0 link... (2 Replies)
Discussion started by: javeedkaleem
2 Replies
XSOL(6) 							   Games Manual 							   XSOL(6)

NAME
xsol - X Solitaire SYNOPSIS
xsol DESCRIPTION
This manual page briefly documents xsol , a simple Motif/ Lesstif version of the classic solitaire game. It was written for the Debian GNU/Linux distribution because the original program does not have a manual page. HOW TO PLAY
Solitaire is a card game. At the start you are presented with seven columns of cards. First has only one card, second one has two, third three and so on (28 in total), but only the first card in every column is shown ('opened'). Also there is the deck (24 cards at the start), and four emtpy places for suit stacks. Cards in the deck and in the columns are unsorted, and the object of Solitaire is to use all the cards in the deck to build up the four suit stacks in ascending order, beginning with the aces. You can accomplish that by dragging and dropping the red onto the black (and black onto the red) cards between the columns, and between the deck and the columns (but not the other way around). When you see a whole turned card, click on it to see it ('open' it) and to be able to move it somewhere. Deck is opened by clicking on it; once you reach the end of the deck, just click once more and you'll reopen it. If you reach a point when you can't move any more cards to the stacks, and rearranging cards in columns and the deck gets you nowhere, the game is over. Start it again. OPTIONS
You can access all options within the program, through the 'Game' menu. There you have four options: New game - start a new game, Undo - undo last move, Options - configure these options: Timed game - should we count the seconds? Keep score - should we count the score? Show number of cards in deck - should we show it? Draw one - card from the deck, Draw three - cards from the deck. About - shows information about the author. Exit - quits the game. AUTHOR
xsol was written by Brian Masney <masneyb@newwave.net>, and this manual page was written by Josip Rodin <jrodin@jagor.srce.hr>. Debian Project March 1999 XSOL(6)
All times are GMT -4. The time now is 01:46 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy