@hicksd8
Only options for the Max Frame Size is 512, 1024 or 2048 on the QLogic card. However what you said makes perfect sense and fits in with the issue well. Need to get the details on the LDEV setting from agent.kgb next. What command do I run to set the LDEV?
---------- Post updated at 08:21 PM ---------- Previous update was at 08:13 PM ----------
Oh you meant on the target, thought you meant on AIX. Here's the config and it looks fine per the developers:
So it's set to LUN 0. Then what you are saying agent.kgb is that this line here:
---------- Post updated at 09:59 PM ---------- Previous update was at 08:21 PM ----------
Anyway to change the Max Frame Size on AIX then? If I can match the two I could find out if they were at play.
---------- Post updated at 10:05 PM ---------- Previous update was at 09:59 PM ----------
Perhaps the Emulex frame size reported of 2112 is 2048 + 64 bytes for the headers and the QLogic doesn't add the 64 bytes to the 2048 it shows in the QLogic Boot Menus? If so they would match. Or am I wrong about this math? The ./hbainfo utility is dated and the devscan doesn't display the frame size. So I'm not 100% here.
Cheers,
DH
---------- Post updated at 11:56 PM ---------- Previous update was at 10:05 PM ----------
Apologies, in case I didn't mention, this is a HBA to HBA FC configuration / test.
---------- Post updated 03-18-16 at 03:20 AM ---------- Previous update was 03-17-16 at 11:56 PM ----------
The PCI entries do not show up for me in the Power5 firmware any longer. I'm wondering if there is anything out of the norm with it. How can I check the Power5 PCI bus for any issues?
Hi,
After I installed gcc on my machine and issued a command to compile a program, I did
gcc -c 'prog'.c
The object file was created, then I did
gcc -o 'prog' 'prog'.o
Then I got this error message I have been reading man pages and searching the internet but have not been able to... (1 Reply)
Dear linuxers,
I'm a novice in C++ programming.
I wrote a ReadFile class in file ReadFile.cpp.
After that, I wrote a test.cpp, which contains a main function, to test whether my class work well.
I follow the following steps to compile the ReadFile.cpp file.
g++296 -c ReadFile.cpp -o... (4 Replies)
Hi all,
This is my first shell script, so I'm hoping the problem is that I'm just missing something, and not something bigger. I have a Java application that I wrote in WSAD that reads data from an Excel file and inserts values into a DB2 database. I'm able to run it successfully in WSAD. I... (4 Replies)
Hi All
I am quite new to Unix. Following is a shell script that i have written and getting the subject mentioned error.
#!/bin/ksh
#-------------------------------------------------------------------------
# File: ang_stdnld.ksh
#
# Desc: UNIX shell script to extract Store information.... (3 Replies)
Hello All,
I've encountered a strange behaviour from g++ that doesn't make sense to me. Maybe you can shed some light on it:
I have a bunch of source files and want to compile them and link them with a static library liba.a located in /usr/local/lib64 into an executable
Approach 1 works... (0 Replies)
Hello,
One one of my AIX boxes I'm having the following errror:
fcstat fcs0:
Port Speed (supported): 4 GBIT
Error opening device: /dev/fscsi0
errno: 0000003d
Has anyone encountered similar errors?
Thank you! (1 Reply)
Hi everybody,
I read about treads realted to this issue but they did not resovle issue given below.
Please help me resolve issue given below
I have html file under /srv/www/htdocs/actual_folder
ls actual_folder/
test.html
and following link works... (0 Replies)
Hi All
I am facing an issue with our new solaris machine.
in /var/adm/messages
root@Prod-App1:/var/tmp#
root@Prod-App1:/var/tmp#
root@Prod-App1:/var/tmp# cat /var/adm//messages
Apr 20 03:10:01 Prod-App1 syslogd: line 25: WARNING: loghost could not be resolved
Apr 20 08:24:18 Prod-App1... (0 Replies)
Hi All
I am facing an issue with our new solaris machine.
in /var/adm/messages
Apr 22 16:43:05 Prod-App1 in.routed: interface net0 to 172.16.101.1 turned off
Apr 22 16:43:33 Prod-App1 mac: NOTICE: nxge0 link up, 1000 Mbps, full duplex
Apr 22 16:43:34 Prod-App1 mac: NOTICE: nxge0 link... (2 Replies)
Discussion started by: javeedkaleem
2 Replies
LEARN ABOUT X11R4
truncate
TRUNCATE(1) User Commands TRUNCATE(1)NAME
truncate - shrink or extend the size of a file to the specified size
SYNOPSIS
truncate OPTION... FILE...
DESCRIPTION
Shrink or extend the size of each FILE to the specified size
A FILE argument that does not exist is created.
If a FILE is larger than the specified size, the extra data is lost. If a FILE is shorter, it is extended and the extended part (hole)
reads as zero bytes.
Mandatory arguments to long options are mandatory for short options too.
-c, --no-create
do not create any files
-o, --io-blocks
treat SIZE as number of IO blocks instead of bytes
-r, --reference=RFILE
base size on RFILE
-s, --size=SIZE
set or adjust the file size by SIZE bytes
--help display this help and exit
--version
output version information and exit
The SIZE argument is an integer and optional unit (example: 10K is 10*1024). Units are K,M,G,T,P,E,Z,Y (powers of 1024) or KB,MB,... (pow-
ers of 1000).
SIZE may also be prefixed by one of the following modifying characters: '+' extend by, '-' reduce by, '<' at most, '>' at least, '/' round
down to multiple of, '%' round up to multiple of.
AUTHOR
Written by Padraig Brady.
REPORTING BUGS
GNU coreutils online help: <http://www.gnu.org/software/coreutils/>
Report truncate translation bugs to <http://translationproject.org/team/>
COPYRIGHT
Copyright (C) 2017 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.
SEE ALSO dd(1), truncate(2), ftruncate(2)
Full documentation at: <http://www.gnu.org/software/coreutils/truncate>
or available locally via: info '(coreutils) truncate invocation'
GNU coreutils 8.28 January 2018 TRUNCATE(1)