I've been googling for a while now, trying to forward port 3000 to port 80....
In the past I used to DLink router to forward port 3000 to 80. I recently finished (well, is it ever done anyhow?) setting up my linux box and got it acting as a router.
I want to continue to run Apache on port 80... (1 Reply)
Hi,
I have to install an application that has a built in tftp server. Tftp comes in on port 69. As i am not installing this application as a root user i am running into trouble because only the root user can listen to ports < 1024. So changing the port i listen to to one greater than 1023 isn't... (1 Reply)
Hi friends
i have the following setup
machine1 two network adapters one connected to lan the other connected directly to machine2
machine2 is not connected to lan
i need to access machine2 directly from the LAN
how to force machine1 to forward all traffic received on a specific port the... (1 Reply)
Hi
I want to set up port forwarding from one network to another network. I already have this configured on the Linux box using iptables.
iptables -t nat -A PREROUTING -p tcp -i eth1 --dport 1521 -j DNAT --to 10.218.146.230
iptables -A FORWARD -p tcp -i eth1 -d 10.218.146.230 -j ACCEPT
... (2 Replies)
Hi,
I am looking out a way to forward all UDP traffic coming on ports 3001,3002,3003 and 3004 on server 10.2.45.200
to
corresponding ports of server 10.2.45.197.
I am using Solaris 10.0.
-bash-3.00$ uname -a
SunOS airtelussd2 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V445
Is... (6 Replies)
Hi; I have the following issue:
I have a Solaris server running an old applications which connects to an http server in other server at certain port. The thing is that the http server has changed its ip and port and the addres in the app is hard coded and touching the app by now is out of the... (0 Replies)
Hi Linux/Unix Guru,
I am setting Linux Hopping Station to another different servers.
My current config to connect to another servers is using different port to connect.
e.g
ssh -D 1080 -p 22 username@server1.com
ssh -D 1081 -p 22 username@server2.com
Now what I would like to have... (3 Replies)
hi guys
i have a simple question !
i have two ips . a valid and internal(172.16.11.2)
i want to use port forwarding to forward any request to valid IP port 8001 to internal ip port 80 .
i use this rule :
sysctl -w net.ipv4.ip_forward=1
iptables -t nat -A PREROUTING -p tcp... (1 Reply)
Hello Gurus,
I have configured port forwarding at router.
But after configuration I am not able to connect the computer from outside/Over internet/Remote desktp from other computer.
Could you please advice?
Thanks-
Pokhraj (2 Replies)
Hello All,
I would like to ask you very kindly with /etc/sysconfig/iptables file
I have to setup port forwarding on RHEL6 router. Users from public network must be able to ssh to servers in private network behind RHEL6 router. Problem is that servers in private network must be isolated.
My... (2 Replies)
Discussion started by: oidipus
2 Replies
LEARN ABOUT DEBIAN
jpegexiforient
JPEGEXIFORIENT(1) User Commands JPEGEXIFORIENT(1)NAME
jpegexiforient - reads or writes the Exif Orientation Tag
SYNOPSIS
jpegexiforient [switches] jpegfile
DESCRIPTION
This is a utility program to get and set the Exif Orientation Tag. It can be used together with jpegtran in scripts for automatic orienta-
tion correction of digital camera pictures.
The Exif orientation value gives the orientation of the camera relative to the scene when the image was captured. The relation of the '0th
row' and '0th column' to visual position is shown as below.
Value | 0th Row | 0th Column
------+-------------+-----------
1 | top | left side
2 | top | right side
3 | bottom | right side
4 | bottom | left side
5 | left side | top
6 | right side | top
7 | right side | bottom
8 | left side | bottom
For convenience, here is what the letter F would look like if it were tagged correctly and displayed by a program that ignores the orienta-
tion tag:
1 2 3 4
888888 888888 88 88
88 88 88 88
8888 8888 8888 8888
88 88 88 88
88 88 888888 888888
5 6 7 8
8888888888 88 88 8888888888
88 88 88 88 88 88 88 88
88 8888888888 8888888888 88
jpegexiforient output the Exif Orientation Tag in a JPEG Exif file. With the options -1 .. -8, it can also be used to set the tag.
OPTIONS
--help display this help and exit
--version
output version information and exit
-n Do not output the trailing newline
-1 .. -8
Set orientation value 1 .. 8
AUTHOR
Guido Vollbeding <guido@jpegclub.org>
SEE ALSO jpegtran(1), exifautotran(1)jpegexiforient February 2005 JPEGEXIFORIENT(1)