I've been googling for a while now, trying to forward port 3000 to port 80....
In the past I used to DLink router to forward port 3000 to 80. I recently finished (well, is it ever done anyhow?) setting up my linux box and got it acting as a router.
I want to continue to run Apache on port 80... (1 Reply)
Hi,
I have to install an application that has a built in tftp server. Tftp comes in on port 69. As i am not installing this application as a root user i am running into trouble because only the root user can listen to ports < 1024. So changing the port i listen to to one greater than 1023 isn't... (1 Reply)
Hi friends
i have the following setup
machine1 two network adapters one connected to lan the other connected directly to machine2
machine2 is not connected to lan
i need to access machine2 directly from the LAN
how to force machine1 to forward all traffic received on a specific port the... (1 Reply)
Hi
I want to set up port forwarding from one network to another network. I already have this configured on the Linux box using iptables.
iptables -t nat -A PREROUTING -p tcp -i eth1 --dport 1521 -j DNAT --to 10.218.146.230
iptables -A FORWARD -p tcp -i eth1 -d 10.218.146.230 -j ACCEPT
... (2 Replies)
Hi,
I am looking out a way to forward all UDP traffic coming on ports 3001,3002,3003 and 3004 on server 10.2.45.200
to
corresponding ports of server 10.2.45.197.
I am using Solaris 10.0.
-bash-3.00$ uname -a
SunOS airtelussd2 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V445
Is... (6 Replies)
Hi; I have the following issue:
I have a Solaris server running an old applications which connects to an http server in other server at certain port. The thing is that the http server has changed its ip and port and the addres in the app is hard coded and touching the app by now is out of the... (0 Replies)
Hi Linux/Unix Guru,
I am setting Linux Hopping Station to another different servers.
My current config to connect to another servers is using different port to connect.
e.g
ssh -D 1080 -p 22 username@server1.com
ssh -D 1081 -p 22 username@server2.com
Now what I would like to have... (3 Replies)
hi guys
i have a simple question !
i have two ips . a valid and internal(172.16.11.2)
i want to use port forwarding to forward any request to valid IP port 8001 to internal ip port 80 .
i use this rule :
sysctl -w net.ipv4.ip_forward=1
iptables -t nat -A PREROUTING -p tcp... (1 Reply)
Hello Gurus,
I have configured port forwarding at router.
But after configuration I am not able to connect the computer from outside/Over internet/Remote desktp from other computer.
Could you please advice?
Thanks-
Pokhraj (2 Replies)
Hello All,
I would like to ask you very kindly with /etc/sysconfig/iptables file
I have to setup port forwarding on RHEL6 router. Users from public network must be able to ssh to servers in private network behind RHEL6 router. Problem is that servers in private network must be isolated.
My... (2 Replies)
Discussion started by: oidipus
2 Replies
LEARN ABOUT DEBIAN
libssh2_channel_direct_tcpip_ex
libssh2_channel_direct_tcpip_ex(3) libssh2 manual libssh2_channel_direct_tcpip_ex(3)NAME
libssh2_channel_direct_tcpip_ex - Tunnel a TCP connection through an SSH session
SYNOPSIS
#include <libssh2.h>
LIBSSH2_CHANNEL * libssh2_channel_direct_tcpip_ex(LIBSSH2_SESSION *session, const char *host, int port, const char *shost, int sport);
LIBSSH2_CHANNEL * libssh2_channel_direct_tcpip(LIBSSH2_SESSION *session, const char *host, int port);
DESCRIPTION
session - Session instance as returned by libssh2_session_init_ex(3)
host - Third party host to connect to using the SSH host as a proxy.
port - Port on third party host to connect to.
shost - Host to tell the SSH server the connection originated on.
sport - Port to tell the SSH server the connection originated from.
Tunnel a TCP/IP connection through the SSH transport via the remote host to a third party. Communication from the client to the SSH server
remains encrypted, communication from the server to the 3rd party host travels in cleartext.
RETURN VALUE
Pointer to a newly allocated LIBSSH2_CHANNEL instance, or NULL on errors.
ERRORS
LIBSSH2_ERROR_ALLOC - An internal memory allocation call failed.
SEE ALSO libssh2_session_init_ex(3)libssh2 0.15 1 Jun 2007 libssh2_channel_direct_tcpip_ex(3)