03-15-2016
the first error you receive - FCP_ERR4 4B436A3D - according to the sense information provided means, that AIX driver sent RESET command to the SAN device and didn't receive an answer. Usually it means, you have a SAN problem and you should open a case with your SAN switch or better - storage device vendor.
But as far as I see from the output of lsattr -El fscsi0 you don't have SAN. You have a direct-attached storage. If you have a SAN fabric, not a direct-attached storage, then you have a problem connecting to the fabric, mostly a broken cable is the cause.
If you really have a direct-attached storage, then I have some other question:
- how many LDEVs/LUNs do you receive from the storage?
- does the problem happen only with this LDEV (Nr. 00:00:00:00:00:00:00:02) or also with other LDEVs?
- is the storage connected through multiple adapters or is it the only adapter to the storage?
- how many different storages are connected using this adapter?
If it is a single storage directly connected through the single adapter, I would recommend:
- to check the cable
- to switch off dyntrk and fc_err_recov
- to minimize max_xfer_size and corresponding parameters on the hdisk
10 More Discussions You Might Find Interesting
1. Programming
Hi,
After I installed gcc on my machine and issued a command to compile a program, I did
gcc -c 'prog'.c
The object file was created, then I did
gcc -o 'prog' 'prog'.o
Then I got this error message I have been reading man pages and searching the internet but have not been able to... (1 Reply)
Discussion started by: rachael
1 Replies
2. Linux
Dear linuxers,
I'm a novice in C++ programming.
I wrote a ReadFile class in file ReadFile.cpp.
After that, I wrote a test.cpp, which contains a main function, to test whether my class work well.
I follow the following steps to compile the ReadFile.cpp file.
g++296 -c ReadFile.cpp -o... (4 Replies)
Discussion started by: niukun
4 Replies
3. UNIX for Dummies Questions & Answers
Hi all,
This is my first shell script, so I'm hoping the problem is that I'm just missing something, and not something bigger. I have a Java application that I wrote in WSAD that reads data from an Excel file and inserts values into a DB2 database. I'm able to run it successfully in WSAD. I... (4 Replies)
Discussion started by: loveToBlade
4 Replies
4. Shell Programming and Scripting
Hi All
I am quite new to Unix. Following is a shell script that i have written and getting the subject mentioned error.
#!/bin/ksh
#-------------------------------------------------------------------------
# File: ang_stdnld.ksh
#
# Desc: UNIX shell script to extract Store information.... (3 Replies)
Discussion started by: amitsinha
3 Replies
5. Shell Programming and Scripting
#!/bin/bash
while
do
codes
done
it says line 2: [: too many arguments
why? (4 Replies)
Discussion started by: garfish
4 Replies
6. Programming
Hello All,
I've encountered a strange behaviour from g++ that doesn't make sense to me. Maybe you can shed some light on it:
I have a bunch of source files and want to compile them and link them with a static library liba.a located in /usr/local/lib64 into an executable
Approach 1 works... (0 Replies)
Discussion started by: magelord
0 Replies
7. AIX
Hello,
One one of my AIX boxes I'm having the following errror:
fcstat fcs0:
Port Speed (supported): 4 GBIT
Error opening device: /dev/fscsi0
errno: 0000003d
Has anyone encountered similar errors?
Thank you! (1 Reply)
Discussion started by: aixn00b
1 Replies
8. UNIX for Dummies Questions & Answers
Hi everybody,
I read about treads realted to this issue but they did not resovle issue given below.
Please help me resolve issue given below
I have html file under /srv/www/htdocs/actual_folder
ls actual_folder/
test.html
and following link works... (0 Replies)
Discussion started by: newbielgn
0 Replies
9. Solaris
Hi All
I am facing an issue with our new solaris machine.
in /var/adm/messages
root@Prod-App1:/var/tmp#
root@Prod-App1:/var/tmp#
root@Prod-App1:/var/tmp# cat /var/adm//messages
Apr 20 03:10:01 Prod-App1 syslogd: line 25: WARNING: loghost could not be resolved
Apr 20 08:24:18 Prod-App1... (0 Replies)
Discussion started by: javeedkaleem
0 Replies
10. Solaris
Hi All
I am facing an issue with our new solaris machine.
in /var/adm/messages
Apr 22 16:43:05 Prod-App1 in.routed: interface net0 to 172.16.101.1 turned off
Apr 22 16:43:33 Prod-App1 mac: NOTICE: nxge0 link up, 1000 Mbps, full duplex
Apr 22 16:43:34 Prod-App1 mac: NOTICE: nxge0 link... (2 Replies)
Discussion started by: javeedkaleem
2 Replies
LEARN ABOUT CENTOS
iprupdate
IPRUPDATE(8) System Manager's Manual IPRUPDATE(8)
NAME
iprupdate - IBM Power RAID adapter/device microcode update utility
SYNOPSIS
iprupdate
iprupdate --debug --check_only --daemon --use-polling --use-uevents
DESCRIPTION
iprupdate is used to update the microcode on IBM storage adapters and the disk units attached to them to a minimum supported level. It can
be run at any time while the ipr device driver is loaded. The utility will check the microcode revision level of each storage adapter/disk
unit on the system and compare it to the microcode revision level that is installed in /etc/microcode, /usr/lib/microcode, and
/lib/firmware. If the microcode level on the adapter/device is below the minimum supported level and the level of the latest image is
newer, the microcode will be updated to the latest level available. It is desired that this be called in the boot process.
OPTIONS
--version
Print the version number of iprupdate
--debug
Enable additional error logging. Enabling this will result in additional errors logging to /var/log/messages.
--check_only
Check if any adapters or disk units are below their minimum supported level.
--daemon
Run as a daemon to handle adapters and devices being hotplugged.
--use-polling
Do not use netlink/uevent notification, but rather poll for adapter and device configuration changes.
--use-uevents
Use netlink/uevent notification rather than polling for adapter and device configuration changes. If not specified, polling will be
used until the first uevent notification appears, then netlink will be used.
AUTHOR
Brian King (brking@us.ibm.com)
February 2005 IPRUPDATE(8)