Receiving: 4B436A3D 0313233216 T H fscsi0 LINK ERROR Post: 302968818

Sponsored Content

Operating Systems AIX Receiving: 4B436A3D 0313233216 T H fscsi0 LINK ERROR Post 302968818 by Devyn on Monday 14th of March 2016 09:15:43 PM

03-14-2016

Registered User

These two error messages below always accompany each other. So I'll post both to get feedback from others as I work through the solutions on this page IBM Technical support search - United States. However I tried to disable dynamic tracking already (Both I then I & T / I = Initiator and T = Target in this context), from that page, but that didn't help with the issue:

Code:

26623394   0314022216 T H fscsi0         COMMUNICATION PROTOCOL ERROR
4B436A3D   0314022216 T H fscsi0         LINK ERROR

Code:

[ AIX root@mdsnim01:/ ] errpt -aDj 4B436A3D
---------------------------------------------------------------------------
LABEL:          FCP_ERR4
IDENTIFIER:     4B436A3D

Date/Time:       Mon Mar 14 19:46:05 EDT 2016
Sequence Number: 8605
Machine Id:      000D6210D600
Node Id:         mdsnim01
Class:           H
Type:            TEMP
WPAR:            Global
Resource Name:   fscsi0
Resource Class:  driver
Resource Type:   efscsi
Location:        U787B.001.DNWCB61-P1-C1-T1


Description
LINK ERROR

        Recommended Actions
        PERFORM PROBLEM DETERMINATION PROCEDURES

Detail Data
SENSE DATA
0000 0010 0000 002C 0000 0000 0301 0000 0000 0000 0000 0000 0000 0000 0000 2000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0001 0000 0000 0000 0002 0000 0000 0000 0000
2101 001B 32A1 8121 2001 001B 32A1 8121 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 012F 0000 0002 0000 0100 0000 0000 0000 0000 0301 0100 0000 0000 0002 0000
0000 0000 0000 0001 0000 0000 0000 0061 0000 0412 0000 0000 0000 0000 2A58 A000
2400 0000 48E0 8B28 0000 0000 0001 0001 0000 0000 0000 0000 2022 0100 069C 0200
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
2400 0000 48E0 8B28 0000 0000 0001 0001 0000 0000 0000 0000 2022 0100 069C 0200
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
2000 0000 0000 8C28 0000 0000 1801 0000 0010 8C28 0000 0000 0000 0000 0000 2022
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
1000 0000 C962 1B82 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0001 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

Diagnostic Analysis
Diagnostic Log sequence number: 1031
Resource tested:        fscsi0
Menu Number:            2602902
Description:


Error Log Analysis has detected multiple communication
errors.  These errors can be caused by attached devices,
a switch, a hub, or a SCSI-to-FC convertor.

If connected to a switch, refer to the Storage Area
Network (SAN) problem determination procedures for
additional problem resolution.

If not connected to a switch, run diagnostics on the
attached devices.  If a hub or SCSI-to-FC convertor is
attached, refer to the product documentation for problem
resolution.


---------------------------------------------------------------------------
LABEL:          FCP_ERR4
IDENTIFIER:     4B436A3D

Date/Time:       Mon Mar 14 02:33:03 EDT 2016
Sequence Number: 7180
Machine Id:      000D6210D600
Node Id:         mdsnim01
Class:           H
Type:            TEMP
WPAR:            Global
Resource Name:   fscsi0
Resource Class:  driver
Resource Type:   efscsi
Location:        U787B.001.DNWCB61-P1-C1-T1


Description
LINK ERROR

        Recommended Actions
        PERFORM PROBLEM DETERMINATION PROCEDURES

Detail Data
SENSE DATA
0000 0010 0000 002C 0000 0000 0301 0000 0000 0000 0000 0000 0000 0000 0000 2000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0001 0000 0000 0000 0002 0000 0000 0000 0000
2101 001B 32A1 8121 2001 001B 32A1 8121 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 012F 0000 0002 0000 0100 0000 0000 0000 0000 0301 0100 0000 0000 0002 0000
0000 0000 0000 0001 0000 0000 0000 0061 0000 0412 0000 0000 0000 0000 2A58 A000
2400 0000 48E0 8B28 0000 0000 0001 0001 0000 0000 0000 0000 2015 0100 069C 0200
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
2400 0000 48E0 8B28 0000 0000 0001 0001 0000 0000 0000 0000 2015 0100 069C 0200
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
2000 0000 0000 8C28 0000 0000 1801 0000 0010 8C28 0000 0000 0000 0000 0000 2015
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
1000 0000 C962 1B82 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0001 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

Diagnostic Analysis
Diagnostic Log sequence number: 1025
Resource tested:        fscsi0
Menu Number:            2602902
Description:


Error Log Analysis has detected multiple communication
errors.  These errors can be caused by attached devices,
a switch, a hub, or a SCSI-to-FC convertor.

If connected to a switch, refer to the Storage Area
Network (SAN) problem determination procedures for
additional problem resolution.

If not connected to a switch, run diagnostics on the
attached devices.  If a hub or SCSI-to-FC convertor is
attached, refer to the product documentation for problem
resolution.


---------------------------------------------------------------------------
LABEL:          FCP_ERR4
IDENTIFIER:     4B436A3D

Date/Time:       Mon Mar 14 02:22:14 EDT 2016
Sequence Number: 7160
Machine Id:      000D6210D600
Node Id:         mdsnim01
Class:           H
Type:            TEMP
WPAR:            Global
Resource Name:   fscsi0
Resource Class:  driver
Resource Type:   efscsi
Location:        U787B.001.DNWCB61-P1-C1-T1


Description
LINK ERROR

        Recommended Actions
        PERFORM PROBLEM DETERMINATION PROCEDURES

Detail Data
SENSE DATA
0000 0010 0000 002C 0000 0000 0301 0000 0000 0000 0000 0000 0000 0000 0000 2000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0001 0000 0000 0000 0002 0000 0000 0000 0000
2101 001B 32A1 8121 2001 001B 32A1 8121 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 012F 0000 0002 0000 0100 0000 0000 0000 0000 0301 0100 0000 0000 0002 0000
0000 0000 0000 0001 0000 0000 0000 0061 0000 0412 0000 0000 0000 0000 2A58 A000
2400 0000 48E0 8B28 0000 0000 0001 0001 0000 0000 0000 0000 2008 0100 069C 0200
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
2400 0000 48E0 8B28 0000 0000 0001 0001 0000 0000 0000 0000 2008 0100 069C 0200
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
2000 0000 0000 8C28 0000 0000 1801 0000 0010 8C28 0000 0000 0000 0000 0000 2008
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
1000 0000 C962 1B82 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0001 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

Diagnostic Analysis
Diagnostic Log sequence number: 1019
Resource tested:        fscsi0
Menu Number:            2602902
Description:


Error Log Analysis has detected multiple communication
errors.  These errors can be caused by attached devices,
a switch, a hub, or a SCSI-to-FC convertor.

If connected to a switch, refer to the Storage Area
Network (SAN) problem determination procedures for
additional problem resolution.

If not connected to a switch, run diagnostics on the
attached devices.  If a hub or SCSI-to-FC convertor is
attached, refer to the product documentation for problem
resolution.


[ AIX root@mdsnim01:/ ]

Code:

[ AIX root@mdsnim01:/ ] errpt -aDj 26623394
---------------------------------------------------------------------------
LABEL:          FCP_ERR12
IDENTIFIER:     26623394

Date/Time:       Mon Mar 14 19:46:19 EDT 2016
Sequence Number: 8606
Machine Id:      000D6210D600
Node Id:         mdsnim01
Class:           H
Type:            TEMP
WPAR:            Global
Resource Name:   fscsi0
Resource Class:  driver
Resource Type:   efscsi
Location:        U787B.001.DNWCB61-P1-C1-T1


Description
COMMUNICATION PROTOCOL ERROR

        Recommended Actions
        PERFORM PROBLEM DETERMINATION PROCEDURES

Detail Data
SENSE DATA
0000 0010 0000 00A1 0000 0013 0303 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0001 0000 0000 0000 0002 0000 0000 0000 0000
2101 001B 32A1 8121 2001 001B 32A1 8121 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 012F 0000 0002 0000 0100 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0001 0000 0000 0000 0040 0000 0412 0001 0000 0000 0000 2A58 A000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0602 8A13 0200
0019 0000 0000 0000 0000 0000 05D9 CBC8 0000 0001 0000 0000 0000 0000 0000 0000
0000 0001 636D 4643 F100 0A00 2BF5 80E8 F100 0A00 2BF5 815C F100 0A00 2BF5 706C
0000 0000 288B F0E8 0000 0000 288B F15C 0000 0000 288B E06C 0100 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0300 0000 0908 0000 8800 0800 00FF FFFF 0000 07D0 1000 0000 C962 1B82 2000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
1000 0000 C962 1B82 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0001 0000 0001 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Duplicates
Number of duplicates
           2
Time of first duplicate
Mon Mar 14 02:22:27 EDT 2016
Time of last duplicate
Mon Mar 14 19:46:19 EDT 2016
[ AIX root@mdsnim01:/ ]

Cheers,
DH

---------- Post updated at 08:17 PM ---------- Previous update was at 08:15 PM ----------

Just checking the time and notice all of these ended up getting logged at the exact same time:

Code:

E86653C3   0314022216 P H LVDD           I/O ERROR DETECTED BY LVM
C62E1EB7   0314022216 P H hdisk2         DISK OPERATION ERROR
26623394   0314022216 T H fscsi0         COMMUNICATION PROTOCOL ERROR
4B436A3D   0314022216 T H fscsi0         LINK ERROR

Just let me know if you need to see the first two. They seem symptomatic however.

Cheers,
DH

---------- Post updated at 09:15 PM ---------- Previous update was at 08:17 PM ----------

Code:

DISPLAY MICROCODE LEVEL                                                                                               802111
fcs0    FC Adapter

The current microcode level for fcs0 is 271304.

Use Enter to continue.

Devyn

View Public Profile for Devyn

Find all posts by Devyn

10 More Discussions You Might Find Interesting

1. Programming

Link Edit Error, Help!!!!!

Hi, After I installed gcc on my machine and issued a command to compile a program, I did gcc -c 'prog'.c The object file was created, then I did gcc -o 'prog' 'prog'.o Then I got this error message I have been reading man pages and searching the internet but have not been able to...

2. Linux

link error problem

Dear linuxers, I'm a novice in C++ programming. I wrote a ReadFile class in file ReadFile.cpp. After that, I wrote a test.cpp, which contains a main function, to test whether my class work well. I follow the following steps to compile the ReadFile.cpp file. g++296 -c ReadFile.cpp -o...

3. UNIX for Dummies Questions & Answers

Receiving error on Unix server-- java.lang.UnsatisfiedLinkError: registerNatives

Hi all, This is my first shell script, so I'm hoping the problem is that I'm just missing something, and not something bigger. I have a Java application that I wrote in WSAD that reads data from an Excel file and inserts values into a DB2 database. I'm able to run it successfully in WSAD. I...

4. Shell Programming and Scripting

Receiving error: ./ang.ksh[35]: 0403-057 Syntax error at line 116 : `done' is not expected.

Hi All I am quite new to Unix. Following is a shell script that i have written and getting the subject mentioned error. #!/bin/ksh #------------------------------------------------------------------------- # File: ang_stdnld.ksh # # Desc: UNIX shell script to extract Store information....

5. Shell Programming and Scripting

Why am i receiving too many argument error with this?

#!/bin/bash while do codes done it says line 2: [: too many arguments why?

6. Programming

g++ fails to link to static library when compilation and link in single command

Hello All, I've encountered a strange behaviour from g++ that doesn't make sense to me. Maybe you can shed some light on it: I have a bunch of source files and want to compile them and link them with a static library liba.a located in /usr/local/lib64 into an executable Approach 1 works...

7. AIX

Error opening device: /dev/fscsi0

Hello, One one of my AIX boxes I'm having the following errror: fcstat fcs0: Port Speed (supported): 4 GBIT Error opening device: /dev/fscsi0 errno: 0000003d Has anyone encountered similar errors? Thank you!

8. UNIX for Dummies Questions & Answers

[Solved] Symbolic link not allowed or link target not accessible

Hi everybody, I read about treads realted to this issue but they did not resovle issue given below. Please help me resolve issue given below I have html file under /srv/www/htdocs/actual_folder ls actual_folder/ test.html and following link works...

9. Solaris

/var/adm/messages (interface turned off/restored) and link up & link down message.

Hi All I am facing an issue with our new solaris machine. in /var/adm/messages root@Prod-App1:/var/tmp# root@Prod-App1:/var/tmp# root@Prod-App1:/var/tmp# cat /var/adm//messages Apr 20 03:10:01 Prod-App1 syslogd: line 25: WARNING: loghost could not be resolved Apr 20 08:24:18 Prod-App1...

10. Solaris

/var/adm/messages (insterface turned off/restored) and link up & link down message.

Hi All I am facing an issue with our new solaris machine. in /var/adm/messages Apr 22 16:43:05 Prod-App1 in.routed: interface net0 to 172.16.101.1 turned off Apr 22 16:43:33 Prod-App1 mac: NOTICE: nxge0 link up, 1000 Mbps, full duplex Apr 22 16:43:34 Prod-App1 mac: NOTICE: nxge0 link...

10 More Discussions You Might Find Interesting

1. Programming

Link Edit Error, Help!!!!!

Discussion started by: rachael

2. Linux

link error problem

Discussion started by: niukun

3. UNIX for Dummies Questions & Answers

Receiving error on Unix server-- java.lang.UnsatisfiedLinkError: registerNatives

Discussion started by: loveToBlade

4. Shell Programming and Scripting

Receiving error: ./ang.ksh[35]: 0403-057 Syntax error at line 116 : `done' is not expected.

Discussion started by: amitsinha

5. Shell Programming and Scripting

Why am i receiving too many argument error with this?

Discussion started by: garfish

6. Programming

g++ fails to link to static library when compilation and link in single command

Discussion started by: magelord

7. AIX

Error opening device: /dev/fscsi0

Discussion started by: aixn00b

8. UNIX for Dummies Questions & Answers

[Solved] Symbolic link not allowed or link target not accessible

Discussion started by: newbielgn

9. Solaris

/var/adm/messages (interface turned off/restored) and link up & link down message.

Discussion started by: javeedkaleem

10. Solaris

/var/adm/messages (insterface turned off/restored) and link up & link down message.

Discussion started by: javeedkaleem