Find device ID for partition in Solaris 11? Post: 302968443

5 More Discussions You Might Find Interesting

1. Solaris

Find a Fat32 partition under solaris 10 x86

Hello, I use Sun Solaris 10 under a x86 computer, and I want to mount a Fat32 partition who are stored in the same disk with the UFS filesystem. But, before mount this partition, I need to know is location in /dev/dsk Because there are a lot of file "c0t0d0" etc..., and I didn't find my...

2. Linux

shrinking root partition and using free space to create a block device

We are intending to protect a set of user specified files using LVM mirroring where the protected space on which the user files are stored is mirrored on an LV on a different disk. Our problem is that for a user with a custom layout has installed linux with 2 partitons for swap and / and there is...

3. AIX

How to find all device on p570 when need do device firmware upgrade?

I need upgrade firmware for the device of p570, when I go to IBM FIX download website, there are a lot of device of p570 listed. How can I know what device I have on my p570?

4. Solaris

Partition overlaps another partition while creating new parition in solaris

hi all while formatting hard disk i am getting following error. Partition 1 ends at 266338338 It must be between 34 and 143374704. label error: EFI Labels do not support overlapping partitions Partition 8 overlaps partition 1. Warning: error writing EFI. Label failed. I have formatted the...

5. Red Hat

This doesn't look like a partition table Probably you selected the wrong device.

Hi, I need to mount the device from this device # fdisk -l . . . Disk /dev/sdas: 2000.4 GB, 2000365289472 bytes 255 heads, 63 sectors/track, 243197 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size...

LEARN ABOUT OSF1

installgrub

installgrub(1M) 														   installgrub(1M)

NAME

       installgrub - install GRUB in a disk partition or a floppy

SYNOPSIS

       /sbin/installgrub [-fm] stage1 stage2 raw-device

       The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.

       installgrub  installs  GRUB  stage  1  and  stage  2  files on the boot area of a disk partition. If you specify the -m option, installgrub
       installs the stage 1 file on the master boot sector of the disk.

       The installgrub command accepts the following options:

       -f

	   Suppresses interaction when overwriting the master boot sector.

       -m

	   Installs GRUB stage1 on the master boot sector interactively.

       The installgrub command accepts the following operands:

       stage1

	   The name of the GRUB stage 1 file.

       stage2

	   The name of the GRUB stage 2 file.

       raw-device

	   The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable.  For  disk
	   devices,  specify  the  slice  where  the  GRUB  menu  file	is  located.  (For Solaris it is the root slice.) For a floppy disk, it is
	   /dev/rdiskette.

       Example 1: Installing GRUB on a Hard Disk Slice

       The following command installs GRUB on a system where the root slice is c0d0s0:

       example# /sbin/installgrub /boot/grub/stage1 
		/boot/grub/stage2 /dev/rdsk/c0d0s0

       Example 2: Installing GRUB on a Floppy

       The following command installs GRUB on a formatted floppy:

       example# mount -F pcfs /dev/diskette /mnt
       # mkdir -p /mnt/boot/grub
       # cp /boot/grub/* /mnt/boot/grub
       # umount /mnt
       # cd /boot/grub
       # /sbin/installgrub stage1 stage2 /dev/rdiskette

       /boot/grub

	   Directory where GRUB files reside.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

       boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)

       Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
       boot the GRUB in the Solaris partition regardless of which fdisk partition is active.

								    24 May 2005 						   installgrub(1M)