02-13-2016
I set the speed using the below after powering the P5 down:
stty -F /dev/ttyUSB0 19200
stty -F /dev/ttyUSB0
Then connected via putty. Worked good. I had unplugged the HMC cables earlier while the system was running and that didn't make a difference. When I had established the console session, I plugged the power cables into the Power5 again and watched the messages:
S1>
You have logged out.
.....
It logged me out of the console ASMI. The thought that the HMC connection might disable the console port seamed like an odd thing to do to me so didn't consider to test it, even though it crossed my mind. I also tried to unplug the ethernet cables from the HMC ports to see if the serial ports would be reenabled but it doesnt' work in reverse. Once you power the Power5 server on or plug in the HMC cables, either action has the effect of permanently disabling the serial ports. Strange design but ok.
Hope this helps anyone else looking.
Cheers,
DH
9 More Discussions You Might Find Interesting
1. AIX
I'm stuck - when I boot the machine and hit 5 on the keyboard, all I get is an SP login. Can someone give me some tips on how to get to the install via the serial port? (2 Replies)
Discussion started by: tb0ne
2 Replies
2. HP-UX
I have a HP Visualize C200 running hpux that I am trying to boot into using a null modem through com1 from my Sun Ultra 10. I get all the way to the login prompt and then it becomes innactive and wont let me access the machine anymore. Any ideas? (2 Replies)
Discussion started by: trajek
2 Replies
3. AIX
Hi,
Because of previous error System attention light(yellow exclamation mark) is on.
How do I turn it off ?
thanks
Vilius (2 Replies)
Discussion started by: vilius
2 Replies
4. OS X (Apple)
I'm trying to use an old Commodore 128D as a terminal to access OS X's shell via a serial port. I've used 'screen' and 'zterm' to ensure the two machines are successfully interfaced.
Instructions for opening up the serial console on other Unix-y operating systems don't work with OS X Leopard. ... (3 Replies)
Discussion started by: joecassara
3 Replies
5. UNIX for Dummies Questions & Answers
Hi Gurus,
Can some one explain me the difference between a IP console and a serial console. (1 Reply)
Discussion started by: rama krishna
1 Replies
6. Solaris
I am battling to get a V890 up and running. The system appears to have AUTOBOOT=false, so no OS comes up when it's powered on, and I do not have the credentials to get to the RSC management console. Output to ttya serial console ends at "Probing I/O buses", I assume because output is then being... (4 Replies)
Discussion started by: dstmark
4 Replies
7. Solaris
i am running solaris 10 in my vmware workstation. How to setup a console for my solaris box. in Vmware i could see a serial port option. can some one help me on how i can setup a console . (0 Replies)
Discussion started by: chidori
0 Replies
8. AIX
hello everyone :D
i'm new to AIX and i loved it the moment i saw an AIX admin who came to where i work to install an AIX server for an ERP project, i loved it so much that i bought the old server in my company
my server is 9133-55a
the server has no graphic card, and i cant use HMC
how can... (3 Replies)
Discussion started by: pico
3 Replies
9. Solaris
Hi Experts.
i have been stuck up with an issue.
i have connected my Solaris 8 , Sun fire V445 on serial port by using Teraterm.
Initially i was able to login and executed some tasks.
After executing some commands (mainly Control +c), i am not able to type any key or not able to do anything at... (2 Replies)
Discussion started by: siddulamadhu
2 Replies
LEARN ABOUT OSF1
port_names
ports(7) Miscellaneous Information Manual ports(7)
NAME
ports, port_names - Device (tty and lp) names for serial and parallel ports
SYNOPSIS
Default Serial Ports:
/dev/tty00
/dev/tty01 (not present on a single-port system)
Parallel Port:
/dev/lp0
DESCRIPTION
AlphaStation and AlphaServer systems provide one or two 9-pin serial communication ports. These ports are usually labelled 1 (COMM1) and 2
(COMM2), but they may be identified by different icons. Using the appropriate serial cable and terminator, you can connect a serial
printer, external modem, or character-cell terminal to a serial port. Most AlphaStation and AlphaServer systems also provide one parallel
port, for use with a parallel printer.
When you add a device to your system, the installation documentation may instruct you to map the device pathname to the port. These
devices are located in the /dev directory.
For serial-line ports, the two default device pathnames are: This pathname always maps to 1, COMM1, the lowest port number, an icon for a
terminal console, or the only serial port (on a single-port system). This pathname always maps to 2, COMM2, the next numbered port, or (if
one serial port is labeled with an icon for a terminal console) the remaining serial port.
If your system hardware has been extended to include additional serial ports, the pathnames /dev/tty02, /dev/tty03, and so forth, may also
be available to you. However, most systems have only /dev/tty00 and /dev/tty01 as the device pathnames for serial ports.
The one parallel port on an AlphaStation or AlphaServer may be labeled with the word printer or a printer icon. On some systems, the paral-
lel port may not be labeled. The device pathname for the parallel port is /dev/lp0. Currently, Tru64 UNIX does not fully support parallel
printers, so fewer devices are connected to this port as compared to serial ports.
If you are connecting a terminal console to your system, it must be connected to the serial port mapped to /dev/tty00. For other serial
devices, it does not matter which of the serial ports you choose for the connection. For example, suppose you are setting up a system that
has two serial ports, labeled 1 and 2. You intend to use a serial-line terminal rather than a workstation monitor as the system console and
also want to connect a serial-line printer to the system. In this case, you must connect the terminal to the port labeled 1 (with the
device pathname /dev/tty00). Therefore, you must connect the printer to the remaining port labeled 2 (with the device pathname /dev/tty01).
If, for the same type of system, you intend to use a workstation monitor as the system console, it does not matter which serial port you
use for a serial-line printer or modem. In other words, you can connect the printer to either port 1 (with pathname /dev/tty00) or port 2
(with pathname /dev/tty01). When prompted to enter a /dev/tty** pathname by the lprsetup script or the Print configuration tool in the CDE
Application Manager, you would specify /dev/tty00 if you connected the printer to port 1 or /dev/tty01 if you connected the printer to port
2.
See the System Administration manual for more information on setting up consoles (including remote consoles) and printers. See the
modem(7) reference page for more information on setting up modems.
SEE ALSO
Commands: lprsetup(8)
Devices: ace(7), modem(7)
System Administration delim off
ports(7)