when I issue a lspv <hdisk>, I get
When I issue a getconf DISK_SIZE /dev/<hdisk>, I get
Where do those additional ~800 GB come from the output of lspv.. anyone an idea?
The volume is an EMC LUN provided by a VIOS and I have no access there.
Also I am not root so I cant check with bootinfo -s <hdisk>.
Thanks in advance!
cheers
zaxxon
EDIT:
I also did a check with lqueryvg -Atvp <hdisk> and got
Comparing the number of PP on the volume from lspv and the fact that the VG on this PV is placed on 2 hdisks of the same size, I assume that the output of lqueryvg is simly x2, ie. number of hdisks.
The VG on those 2 volumes is enhance-concurrent; maybe this counts in somehow too on some of the tools/outputs?
Also I got this Output, checking amount of PPs on the PV by VGID and PVID:
Can someone tell me how to read these damn sizes.
i mean, i prefer to see sizes in MB but that is not the case when you do an ls -l on directories. i have a had time converting these to MB
just for verification purposes, what would a directory size like this = 3499990308 represent in MB
or... (3 Replies)
Hi we are running a VIO server on a AIX p570
we cannot run and of the command the query the ODM
has anyone seen this problem or has a solution
the command just hangs. (1 Reply)
I was compiling perl on a Solaris 10 server. The compile failed because the output of getconf is wrong (it indicates xarch is generic64 not v9. This is a known bug but I cannot find a fix. I wrote a script as suggested that changes it but when you run getconf again it goes back to generic64.
... (2 Replies)
I wish to programmatically determine whether a solaris system is 32-bit or 64-bit. Investigation on the web suggested that the following commands were the right way to test this:
# isainfo -kv
# getconf LONG_BIT
Strangely, on all three of the solaris systems I have access to, isainfo... (2 Replies)
I want to know wich hdisk have only one pvid and also display hdisk with two pvid.
hdisk1 00c3fcd4e516183f testvg active
hdisk2 00c3fcd4e516189b testvg active
hdisk3 00c3fcd4e51618ec testvg ... (1 Reply)
I 've got this retourn when i tape the commande lspv:
hdisk0 00c3fce454950416 rootvg active
hdisk1 00c3fce454950416 rootvg active
I want to verify if hdisk0 et hdisk1 have the same pvid (ex : 00c3fce454950416)?
Can... (8 Replies)
I have 2 big files in the size of gb. They are same with respect to content, both are “,” delimited. Now both of them are created by two different processes but has the same logic. The problem is they are differing only in few bytes for e.g one file is 202195751 bytes other is 202195773. So... (2 Replies)
Hi all,
When we run lpsv -free command on VIOS, it will take lot of time to display free disks i.e around 8 to 10 minutes. VIOS ioslevel is 2.2.1.4Can you have any solution for this problem?
Many Thanks (2 Replies)
Hi all,
We have observed that lspv -free command tooks 15 to 20 minutes to display the free disks and we have only 77 MPIO disks on VIO Server. Our VIOS version is 2.2.1.4.
Please let us know what could be the reason that lspv -free command taking long time to display the output.
Thank (4 Replies)
Good Morning,
What's a good way to get partition/slice sizes down to the byte on Solaris 9? I've tried a few ways, but only see results like 8.21GB which rounds the number.
Thanks! (5 Replies)
Discussion started by: Stellaman1977
5 Replies
LEARN ABOUT V7
ppmtosixel
ppmtosixel(1) General Commands Manual ppmtosixel(1)NAME
ppmtosixel - convert a portable pixmap into DEC sixel format
SYNOPSIS
ppmtosixel [-raw] [-margin] [ppmfile]
DESCRIPTION
Reads a portable pixmap as input. Produces sixel commands (SIX) as output. The output is formatted for color printing, e.g. for a DEC
LJ250 color inkjet printer.
If RGB values from the PPM file do not have maxval=100, the RGB values are rescaled. A printer control header and a color assignment table
begin the SIX file. Image data is written in a compressed format by default. A printer control footer ends the image file.
OPTIONS -raw If specified, each pixel will be explicitly described in the image file. If -raw is not specified, output will default to com-
pressed format in which identical adjacent pixels are replaced by "repeat pixel" commands. A raw file is often an order of magni-
tude larger than a compressed file and prints much slower.
-margin
If -margin is not specified, the image will be start at the left margin (of the window, paper, or whatever). If -margin is speci-
fied, a 1.5 inch left margin will offset the image.
PRINTING
Generally, sixel files must reach the printer unfiltered. Use the lpr -x option or cat filename > /dev/tty0?.
BUGS
Upon rescaling, truncation of the least significant bits of RGB values may result in poor color conversion. If the original PPM maxval was
greater than 100, rescaling also reduces the image depth. While the actual RGB values from the ppm file are more or less retained, the
color palette of the LJ250 may not match the colors on your screen. This seems to be a printer limitation.
SEE ALSO ppm(5)AUTHOR
Copyright (C) 1991 by Rick Vinci.
26 April 1991 ppmtosixel(1)