Hi all
I have a RedHat Linux AS2.1 server that keep crashing/rebooting and there are no messages in the /var/log/messages file pointing to any problems. I had a look at the /etc/syslog.conf file to see what gets logged to /var/log/messages, but I don't know what else to add. Can anyone tell me... (1 Reply)
Hi everybody,
i have a little problem...
I have two server srv01 and srv02.
srv02 have a syslogd server onboard and listen on 515... not on 514 (it's busy).
How i configure the syslog.conf of srv01 for send logs on srv02:515 ???
Now i have on srv01:
*.* @srv02
if i write:
*.* ... (0 Replies)
Has anyone here configured a central syslog server using syslog-ng ?
I have set one up and I'm trying to tune the syslog-ng.conf file, both for the server and the client. I have found lots of linux example files, but not much on Solaris which is slightly different.
So if you have a Solaris... (5 Replies)
Hi,
We had a hardware problem at work and none of the kernel problems outputted to the log file, just the screen. How can I configure the syslogd.conf file to record kernel events (ie hardware problems) to /dev/console and/var/log/messages. Can I just put:
/dev/console /var/log/messages on... (5 Replies)
Hi Everyone,
I just wanted to know about the below entry in syslog.conf in Solaris 10:
kern.notice @destserver
Now the log will be redirected to destserver. But I want to know the location on the destserver where this log will be thrown.
Thanks in Advance,
Deepak (4 Replies)
I have a RHEL box that I want to be the loghost for all of the other systems on my network and have set up a /logs partitions to hold all of the logs. I've also created a file called current.log that will contain daily logs and created it using the following command: cp /dev/null current.log. ... (4 Replies)
I would like to configure the syslog.conf to have a good monitoring information about my system.
do you have any idea about best configuration from your experience in your Data Centers
BR, (5 Replies)
Hi,
I would like to configure syslog linux client, syslog server is windows server.
so adding on linux client in /etc/syslog.conf @hostname will work in the place of directory location.
example of /etc/syslog.conf
# Log all kernel messages to the console.
# Logging much else clutters up... (2 Replies)
I'm trying to get all ipfw logs going to ipfw.log I've managed that, but ipfw.log is also getting stuff that shows up in system.log
!-ipfw
*.notice;authpriv,remoteauth,ftp,install,internal.none /var/log/system.log
kern.* /var/log/kernel.log... (5 Replies)
Discussion started by: jnojr
5 Replies
LEARN ABOUT OSF1
syslog.conf
syslog.conf(4) Kernel Interfaces Manual syslog.conf(4)NAME
syslog.conf - syslogd configuration file
SYNOPSIS
facility.severity destination Where: Is part of the system generating the message, specified in /usr/include/sys/syslog_pri.h.
See also the syslogd(8) reference page. The severity level, which can be emerg, alert, crit, err, warning, notice, info, or debug. See
/usr/include/sys/syslog_pri.h.
The syslogd daemon logs all messages of the specified severity level plus all messages of greater severity. For example, if you
specify level err, all messages of levels err, crit, alert, and emerg or panic are logged. A local file pathname to a log file, a
host name for remote logging or a list of users. In the latter case the users will receive messages when they are logged in. An
asterisk (*) causes a message to be sent to all users who are currently logged in.
DESCRIPTION
The /etc/syslog.conf file is a system file that enables you to configure or filter events that are to be logged by syslogd. You can specify
more than one facility and its severity level by separating them with semicolons.
You can specify more than one facility logs to the same file by separating the facilities with commas, as shown in the EXAMPLES section.
The syslogd daemon ignores blank lines and lines that begin with an octothorpe (#). You can specify # as the first character in a line to
include comments in the file or to disable an entry. The facility and severity level are separated from the destination by one or more tab
characters.
If you want the syslogd daemon to use a configuration file other than the default, you must specify the file name with the following com-
mand: # syslogd -f config_file
Daily Log Files
You can specify in the /etc/syslog.conf file that the syslogd daemon create daily log files. To create daily log files, use the following
syntax to specify the path name of the message destination: /var/adm/syslog.dated/ { file} The file variable specifies the name of the log
file, for example, mail.log or kern.log. If you specify a /var/adm/syslog.dated/file path name destination, each day the syslogd daemon
creates a sub-directory under the /var/adm/syslog.dated directory and a log file in the sub-directory, using the following syntax:
/var/adm/syslog.dated/ date / file Where: The date variable specifies the day, month, and time that the log file was created. The file
variable specifies the name of the log file you previously specified in the /etc/syslog.conf file. The syslogd daemon automatically cre-
ates a new date directory every 24 hours and also when you boot the system. The current directory is a link to the latest date directory.
To get the latest logs, you only need to reference the /var/adm/syslog.dated/current directory.
EXAMPLES
The following is a sample /etc/syslog.conf file: # # syslogd config file # # facilities: kern user mail daemon auth syslog lpr binary #
priorities: emerg alert crit err warning notice info debug # kern.debug /var/adm/syslog.dated/kern.log user.debug /var/adm/sys-
log.dated/user.log daemon.debug /var/adm/syslog.dated/daemon.log auth.crit;syslog.debug /var/adm/syslog.dated/syslog.log mail,lpr.debug
/var/adm/syslog.dated/misc.log msgbuf.err /var/adm/crash.dated/msgbuf.savecore kern.debug /var/adm/messages kern.debug /dev/console *.emerg
*
FILES
/etc/syslog.conf
/etc/syslog.auth - Authorization file for remote logging.
/usr/include/sys/syslog_pri.h - Common components of a syslog event log record.
RELATED INFORMATION
Commands: /usr/sbin/syslogd(8), /usr/sbin/binlogd(8)
System Administration delim off
syslog.conf(4)