Does this mean the remote server is up? At least ping sent three packets, zero loss. But is it on air?
.
.
.
ping transmitted three packets but didn't receive any: 100% packet loss, not zero!
It doesn't seem to be "on air" unless those packets are intercepted by some firewall.
I can ping other computers in my office. I can telnet other users in my office but i cannot get out of the office network. If i try to go out side of my network it cannot find host.
Any ideas? (5 Replies)
Hi,
Can anybody help me out why l can't not ping my server with Openserver 5.0.4 with my windows machine from a remote site.
The machine could see the local LAN with the Router however, i can't ping or telnet unto the server from another site on the WAN. The default gateway was configure on the... (0 Replies)
Hi All,
We are not able to ping to a AIX box...Network is ok..when we give ping from that AIX box..it is giving 0821-067 ping: The socket creation call failed.there is no enough buffer space for the requested socket operation.
refresh -s inetd is also giving socket error.
Please help to... (1 Reply)
I have one problem and it is giving me hard time
I can ping my windows machine
root@x1ChXpress:/sbin
>ping 192.168.129.66
192.168.129.66 is alive
root@x1ChXpress:/sbin
>netstat -rn
Routing Table:
Destination Gateway Flags Ref Use Interface... (3 Replies)
I have two redhat linux server. i have created one script which contain some command that run on Local server as well as remote server.I am using this command to connect to remote server
ssh user1@192.x.x.x 'command'
but when i am running the script in local server it connecting to the server... (1 Reply)
We have a Sun Solaris Netra 20 server. Our O&M Server gets Alarm Processor
not responding. When Alarm occurs, you can ping the sun server but cannot telnet it. We keep getting Interrupt level not serviced. var/adm/message log is
> tail -f messages
Apr 12 20:09:56 cama pcisch: PCI-device:... (9 Replies)
Hi all,
I am not sure if my problem is specific to HP-UX or not. Hopefully someone can tell me what's wrong.
I have a server name server1 10.100.50.10 in the /etc/hosts file and if I do a ping server1, it shows the right IP address.
However, if I run telnet server1, it is not using... (4 Replies)
Hi,
After a crash of our older AIX server it happend as it is in the title:
ping is ok, but telnet:
What it can be this strange thing?
Franci (2 Replies)
Hello,
I need help, I have the following which save in the result file ping and telnet:port test.
Basically the script works but I should implement a check on ping and telnet command so that ping has 5 seconds threshold and telnet (more important) 10 seconds. Over that threshold ping and... (0 Replies)
Discussion started by: marmellata
0 Replies
LEARN ABOUT SUSE
xine-remote
XINE-REMOTE(1x)XINE-REMOTE(1x)NAME
xine-remote - a small tool to connect xine remote control server.
SYNOPSIS
xine-remote [options]
DESCRIPTION
This manual page documents briefly the xine-remote tool.
xine-remote can replace a raw telnet connection to a xine remote control server. It use the readline facilities (completion, vi/emacs
shortcuts, command history, etc...). By default, it try to connect the localhost, using the default port (see xine(1)).
OPTIONS
The program follow the usual GNU command line syntax, with long ioptions starting with two dashes (`-'). A summary of options are included
below.
-H, --host <hostname>
Try to connect <hostname>.
-P, --port <port>
Try to connect the host using <port>.
-c, --command <command>
Send <command> to server then quit. The command should be single quoted if it contain spaces or special characters.
-n, --noconnect
Do not initiate the connection on startup.
-v, --version
Display version.
-h, --help
Display options summary.
COMMANDS
Few commands are available, which are used to open or close a connection:
? Display available commands (the xine-remote ones + server ones when connection is established).
help <command>
Display the purpose of <command>, if that is omitted, display available commands.
syntax <command>
Display the usage of <command>.
version
Display version.
open <server[:port]>
Open connection to server. A port can be optionally specified, using colon (:) separator.
close Close connection.
quit Leaving xine-remote.
SEE ALSO xine(1).
AUTHOR
This manual page was written by Daniel Caujolle-Bert <f1rmb@users.sourceforge.net> for the xine project.
The xine project 2002-04-16 XINE-REMOTE(1x)