Does this mean the remote server is up? At least ping sent three packets, zero loss. But is it on air?
.
.
.
ping transmitted three packets but didn't receive any: 100% packet loss, not zero!
It doesn't seem to be "on air" unless those packets are intercepted by some firewall.
I can ping other computers in my office. I can telnet other users in my office but i cannot get out of the office network. If i try to go out side of my network it cannot find host.
Any ideas? (5 Replies)
Hi,
Can anybody help me out why l can't not ping my server with Openserver 5.0.4 with my windows machine from a remote site.
The machine could see the local LAN with the Router however, i can't ping or telnet unto the server from another site on the WAN. The default gateway was configure on the... (0 Replies)
Hi All,
We are not able to ping to a AIX box...Network is ok..when we give ping from that AIX box..it is giving 0821-067 ping: The socket creation call failed.there is no enough buffer space for the requested socket operation.
refresh -s inetd is also giving socket error.
Please help to... (1 Reply)
I have one problem and it is giving me hard time
I can ping my windows machine
root@x1ChXpress:/sbin
>ping 192.168.129.66
192.168.129.66 is alive
root@x1ChXpress:/sbin
>netstat -rn
Routing Table:
Destination Gateway Flags Ref Use Interface... (3 Replies)
I have two redhat linux server. i have created one script which contain some command that run on Local server as well as remote server.I am using this command to connect to remote server
ssh user1@192.x.x.x 'command'
but when i am running the script in local server it connecting to the server... (1 Reply)
We have a Sun Solaris Netra 20 server. Our O&M Server gets Alarm Processor
not responding. When Alarm occurs, you can ping the sun server but cannot telnet it. We keep getting Interrupt level not serviced. var/adm/message log is
> tail -f messages
Apr 12 20:09:56 cama pcisch: PCI-device:... (9 Replies)
Hi all,
I am not sure if my problem is specific to HP-UX or not. Hopefully someone can tell me what's wrong.
I have a server name server1 10.100.50.10 in the /etc/hosts file and if I do a ping server1, it shows the right IP address.
However, if I run telnet server1, it is not using... (4 Replies)
Hi,
After a crash of our older AIX server it happend as it is in the title:
ping is ok, but telnet:
What it can be this strange thing?
Franci (2 Replies)
Hello,
I need help, I have the following which save in the result file ping and telnet:port test.
Basically the script works but I should implement a check on ping and telnet command so that ping has 5 seconds threshold and telnet (more important) 10 seconds. Over that threshold ping and... (0 Replies)
Discussion started by: marmellata
0 Replies
LEARN ABOUT DEBIAN
macping
MACPING(1) General Commands Manual MACPING(1)NAME
macping - A tool for pinging other RouterOS or mactelnetd devices
SYNOPSIS
mactelnet [options] <MAC-Address|hostname>
DESCRIPTION
This tool enables you to ping other RouterOS or MAC-Telnetd enabled devices. You can ping either a hostname or a MAC address. If speci-
fied, the hostname (identity) will be looked up via MNDP discovery.
OPTIONS
These programs follow the usual GNU command line syntax. A summary of options is included below.
-f Fast mode, do not wait before sending next ping request. The next ping will be sent immediately when the last ping is received. This
cannot be used with -c 0
-s Specify the amount of bytes to send in each ping packet, up to ~1400 bytes.
-c Number of packets to send before exiting. A value of 0 means unlimited packets and the tool must be exited with Control + C.
-h Show summary of options.
-v Show version of program.
SEE ALSO mndp(1), mactelnet(1), mactelnetd(1).
AUTHOR
macping was written by Hakon Nessjoen <haakon.nessjoen@gmail.com>.
This manual page was written by Hakon Nessjoen <haakon.nessjoen@gmail.com>, for the Debian project (and may be used by others).
February 27, 2011 MACPING(1)