I put this thread to shell and bsd, because I want to resolve this matter on bsd.
May somebody can explain to me how to ping a remote server, in unix. BTW the following code examples were tried on a linux system as well, with the same output, nothing. But on my bsd are not installed nmap neither netcat.
Furthermore there are more than one high anonymous or just anonymous servers, this is just one.
I tried so far the following commands (on linux)
output
Another example with telnet (on linux)
output (quote) no typing error:
without the port
and as well ping as follows
output
Does this mean the remote server is up? At least ping sent three packets, zero loss. But is it on air?
I am aware there are tries with the destination port and tries without it. If someone could give me a hint I really could go on. Thanks in advance.
I can ping other computers in my office. I can telnet other users in my office but i cannot get out of the office network. If i try to go out side of my network it cannot find host.
Any ideas? (5 Replies)
Hi,
Can anybody help me out why l can't not ping my server with Openserver 5.0.4 with my windows machine from a remote site.
The machine could see the local LAN with the Router however, i can't ping or telnet unto the server from another site on the WAN. The default gateway was configure on the... (0 Replies)
Hi All,
We are not able to ping to a AIX box...Network is ok..when we give ping from that AIX box..it is giving 0821-067 ping: The socket creation call failed.there is no enough buffer space for the requested socket operation.
refresh -s inetd is also giving socket error.
Please help to... (1 Reply)
I have one problem and it is giving me hard time
I can ping my windows machine
root@x1ChXpress:/sbin
>ping 192.168.129.66
192.168.129.66 is alive
root@x1ChXpress:/sbin
>netstat -rn
Routing Table:
Destination Gateway Flags Ref Use Interface... (3 Replies)
I have two redhat linux server. i have created one script which contain some command that run on Local server as well as remote server.I am using this command to connect to remote server
ssh user1@192.x.x.x 'command'
but when i am running the script in local server it connecting to the server... (1 Reply)
We have a Sun Solaris Netra 20 server. Our O&M Server gets Alarm Processor
not responding. When Alarm occurs, you can ping the sun server but cannot telnet it. We keep getting Interrupt level not serviced. var/adm/message log is
> tail -f messages
Apr 12 20:09:56 cama pcisch: PCI-device:... (9 Replies)
Hi all,
I am not sure if my problem is specific to HP-UX or not. Hopefully someone can tell me what's wrong.
I have a server name server1 10.100.50.10 in the /etc/hosts file and if I do a ping server1, it shows the right IP address.
However, if I run telnet server1, it is not using... (4 Replies)
Hi,
After a crash of our older AIX server it happend as it is in the title:
ping is ok, but telnet:
What it can be this strange thing?
Franci (2 Replies)
Hello,
I need help, I have the following which save in the result file ping and telnet:port test.
Basically the script works but I should implement a check on ping and telnet command so that ping has 5 seconds threshold and telnet (more important) 10 seconds. Over that threshold ping and... (0 Replies)
Discussion started by: marmellata
0 Replies
LEARN ABOUT OSX
locale::codes::langext
Locale::Codes::LangExt(3pm) Perl Programmers Reference Guide Locale::Codes::LangExt(3pm)NAME
Locale::Codes::LangExt - standard codes for language extension identification
SYNOPSIS
use Locale::Codes::LangExt;
$lext = code2langext('acm'); # $lext gets 'Mesopotamian Arabic'
$code = langext2code('Mesopotamian Arabic'); # $code gets 'acm'
@codes = all_langext_codes();
@names = all_langext_names();
DESCRIPTION
The "Locale::Codes::LangExt" module provides access to standard codes used for identifying language extensions, such as those as defined in
the IANA language registry.
Most of the routines take an optional additional argument which specifies the code set to use. If not specified, the default IANA language
registry codes will be used.
SUPPORTED CODE SETS
There are several different code sets you can use for identifying language extensions. A code set may be specified using either a name, or
a constant that is automatically exported by this module.
For example, the two are equivalent:
$lext = code2langext('acm','alpha');
$lext = code2langext('acm',LOCALE_LANGEXT_ALPHA);
The codesets currently supported are:
alpha
This is the set of three-letter (lowercase) codes from the IANA language registry, such as 'acm' for Mesopotamian Arabic.
This is the default code set.
ROUTINES
code2langext ( CODE [,CODESET] )
langext2code ( NAME [,CODESET] )
langext_code2code ( CODE ,CODESET ,CODESET2 )
all_langext_codes ( [CODESET] )
all_langext_names ( [CODESET] )
Locale::Codes::LangExt::rename_langext ( CODE ,NEW_NAME [,CODESET] )
Locale::Codes::LangExt::add_langext ( CODE ,NAME [,CODESET] )
Locale::Codes::LangExt::delete_langext ( CODE [,CODESET] )
Locale::Codes::LangExt::add_langext_alias ( NAME ,NEW_NAME )
Locale::Codes::LangExt::delete_langext_alias ( NAME )
Locale::Codes::LangExt::rename_langext_code ( CODE ,NEW_CODE [,CODESET] )
Locale::Codes::LangExt::add_langext_code_alias ( CODE ,NEW_CODE [,CODESET] )
Locale::Codes::LangExt::delete_langext_code_alias ( CODE [,CODESET] )
These routines are all documented in the Locale::Codes::API man page.
SEE ALSO
Locale::Codes
The Locale-Codes distribution.
Locale::Codes::API
The list of functions supported by this module.
http://www.iana.org/assignments/language-subtag-registry
The IANA language subtag registry.
AUTHOR
See Locale::Codes for full author history.
Currently maintained by Sullivan Beck (sbeck@cpan.org).
COPYRIGHT
Copyright (c) 2011-2012 Sullivan Beck
This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
perl v5.16.2 2012-10-11 Locale::Codes::LangExt(3pm)