The default gateway is 192.168.10.1
iPv4 routing is already enabled and working.
With vpnc I've built up an VPN connection and can access my home network (192.168.0.0/24) about the tun0 interface.
I want to leave the default gateway from 192.168.10.0/24 unchanged, but I want access the whole internet traffic vom 192.168.11.0/24 trough the VPN connection.
Unfortunately I don't get ideas in my head how I could solve this problem.
Thanks for your help and Merry Christmas
regards
Last edited by jim mcnamara; 12-24-2015 at 12:17 AM..
Hi All:
I need a script that can be timed to run every half hour to an hour to run a traceroute through a VPN to test that a connection is still up from a Win XP system. Which would be the best, C++ or Perl and what are some good resources to look at.
(If anyone has a script to do this... (1 Reply)
I'm having fedora core4.I have a ADSL modem and can access through Windows.I tried setting up internet connection in linux using setup command and netconfig,but doesn't work. can anybody help me with the steps in detail.also can i use the same ip address as in windows? (7 Replies)
Hello,
I have question about VPN connection thats,
I have two networks
1-Office Network
2-Home Network
both are connected to internet
i have in Office network PPTP VPN Server with real or static ip and on the home network all clients working with local ip
Now ,
I need to connect to... (3 Replies)
I got solaris 10 works, but I cannot set up my internet connection. When I ping a website and i open the web browser, it doesn't work.
When the installation asked 'Am I in a network?' i answerd 'no'. I think this is my minstake. How can i get Internet, now?
I have a ADSL modem (not router).... (5 Replies)
I would like to know if anyone has a way to PRINT TO a printer attached to a Windows 7 PC, from SCO, while logged in via a VPN connection.
I am able to attach to a Samba share on the SCO server for files while attached to the VPN, so I know my Samba is workling - but my print jobs return:
... (2 Replies)
I have a Cisco 1841 router configured as Easy VPN Server. Here is the configuration of the router:
Cisco# Cisco#show running-config Building configuration... Current configura - Pastebin.com
I have a Centos 5.7 server with installed Cisco VPN client for Linux. The client successfully... (0 Replies)
Dear all,
Hope you are all fine & enjoying your good health.
Look at this equation
1+1+1=3
So simple I just want to say that I have three internet connections of 1mb, 1mb & 1mb but I can use only 1mb connection at a time & other two connections are useless for me. But now I want to make all... (0 Replies)
Hello all,
Recently took a dive into Unix using Fedora 12 atm. I have cable modem with DHCP and a linksys 8 port router. With windows I was able to simple use the uplink port and plug each computer into the switch and use the internet connection. Having no luck doing the same in Unix. I have... (0 Replies)
On this forum was already posted similar question, but it was 4 years ago and didn't give me answers.
I have two groups of engineers that works in far locations connected via VPN. Physically, the connection is a DSL. Currently we have a linux server in one location that provide files over... (4 Replies)
Hey everyone. I have a problem, but it may be my lack of understanding that is the cause. Ok so I attend a technical school, and needless to say there's a lot of wannabe hackers, pranksters and what not.
So from my laptop I'd like to connect to the wireless AP's around campus, but security is a... (1 Reply)
Discussion started by: Lost in Cyberia
1 Replies
LEARN ABOUT DEBIAN
rlm_ippool_tool
RLM_IPPOOL_TOOL(8) System Manager's Manual RLM_IPPOOL_TOOL(8)NAME
rlm_ippool_tool - dump the contents of the FreeRadius ippool database files
SYNOPSIS
If an ipaddress is specified then that address is used to limit the actions or output.
rlm_ippool_tool [-a] [-c] [-o] [-v] session-db index-db [ipaddress]
Mark the entry nasIP/nasPort as having ipaddress
rlm_ippool_tool -n session-db index-db ipaddress nasIP nasPort
Update old format database to new.
rlm_ippool_tool -u session-db new-session-db
DESCRIPTION
rlm_ippool_tool dumps the contents of the FreeRADIUS ippool databases for analyses or for removal of active (stuck?) entries.
Or with the -n argument adds a usage entry to the FreeRADIUS ippool databases.
OPTIONS -a Print all active entries.
-c Report number of active entries.
-r Remove active entries.
-v Verbose report of all entries.
-o Assume old database format (nas/port pair, not md5 output).
-n Mark the entry nasIP/nasPort as having ipaddress.
-u Update old format database to new.
EXAMPLES
Given the syntax in the FreeRadius radiusd.conf:
ippool myippool {
range-start = 192.168.1.0
range-stop = 192.168.1.255
[...]
session-db = ${raddbdir}/ip-pool.db
ip-index = ${raddbdir}/ip-index.db
}
To see the number of active entries in this pool, use:
$ rlm_ippool_tool -c ip-pool.db ip-index.db
13
To see all active entries in this pool, use:
$ rlm_ippool_tool -a ip-pool.db ip-index.db
192.168.1.5
192.168.1.82
192.168.1.244
192.168.1.57
192.168.1.120
192.168.1.27
[...]
To see all information about the active entries in the use, use:
$ rlm_ippool_tool -av ip-pool.db ip-index.db
NAS:172.16.1.1 port:0x2e8 - ipaddr:192.168.1.5 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x17c - ipaddr:192.168.1.82 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x106 - ipaddr:192.168.1.244 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x157 - ipaddr:192.168.1.57 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x2d8 - ipaddr:192.168.1.120 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x162 - ipaddr:192.168.1.27 active:1 cli:0 num:1
[...]
To see only information of one entry, use:
$ rlm_ippool_tool -v ip-pool.db ip-index.db 192.168.1.1
NAS:172.16.1.1 port:0x90 - ipaddr:192.168.1.1 active:0 cli:0 num:0
To add an IP address usage entry, use:
$ rlm_ippool_tool -n ip-pool.db ip-index.db 192.168.1.1 172.16.1.1 0x90
rlm_ippool_tool: Allocating ip to nas/port: 172.16.1.1/144
rlm_ippool_tool: num: 1
rlm_ippool_tool: Allocated ip 192.168.1.1 to client on nas 172.16.1.1,port 144
SEE ALSO radiusd(8)AUTHORS
Currently part of the FreeRADIUS Project (http://www.freeradius.org) Originally by Edwin Groothuis, edwin@mavetju.org
(http://www.mavetju.org)
Mailing list details are at http://www.freeradius.org/
RLM_IPPOOL_TOOL(8)