The default gateway is 192.168.10.1
iPv4 routing is already enabled and working.
With vpnc I've built up an VPN connection and can access my home network (192.168.0.0/24) about the tun0 interface.
I want to leave the default gateway from 192.168.10.0/24 unchanged, but I want access the whole internet traffic vom 192.168.11.0/24 trough the VPN connection.
Unfortunately I don't get ideas in my head how I could solve this problem.
Thanks for your help and Merry Christmas
regards
Last edited by jim mcnamara; 12-24-2015 at 12:17 AM..
Hi All:
I need a script that can be timed to run every half hour to an hour to run a traceroute through a VPN to test that a connection is still up from a Win XP system. Which would be the best, C++ or Perl and what are some good resources to look at.
(If anyone has a script to do this... (1 Reply)
I'm having fedora core4.I have a ADSL modem and can access through Windows.I tried setting up internet connection in linux using setup command and netconfig,but doesn't work. can anybody help me with the steps in detail.also can i use the same ip address as in windows? (7 Replies)
Hello,
I have question about VPN connection thats,
I have two networks
1-Office Network
2-Home Network
both are connected to internet
i have in Office network PPTP VPN Server with real or static ip and on the home network all clients working with local ip
Now ,
I need to connect to... (3 Replies)
I got solaris 10 works, but I cannot set up my internet connection. When I ping a website and i open the web browser, it doesn't work.
When the installation asked 'Am I in a network?' i answerd 'no'. I think this is my minstake. How can i get Internet, now?
I have a ADSL modem (not router).... (5 Replies)
I would like to know if anyone has a way to PRINT TO a printer attached to a Windows 7 PC, from SCO, while logged in via a VPN connection.
I am able to attach to a Samba share on the SCO server for files while attached to the VPN, so I know my Samba is workling - but my print jobs return:
... (2 Replies)
I have a Cisco 1841 router configured as Easy VPN Server. Here is the configuration of the router:
Cisco# Cisco#show running-config Building configuration... Current configura - Pastebin.com
I have a Centos 5.7 server with installed Cisco VPN client for Linux. The client successfully... (0 Replies)
Dear all,
Hope you are all fine & enjoying your good health.
Look at this equation
1+1+1=3
So simple I just want to say that I have three internet connections of 1mb, 1mb & 1mb but I can use only 1mb connection at a time & other two connections are useless for me. But now I want to make all... (0 Replies)
Hello all,
Recently took a dive into Unix using Fedora 12 atm. I have cable modem with DHCP and a linksys 8 port router. With windows I was able to simple use the uplink port and plug each computer into the switch and use the internet connection. Having no luck doing the same in Unix. I have... (0 Replies)
On this forum was already posted similar question, but it was 4 years ago and didn't give me answers.
I have two groups of engineers that works in far locations connected via VPN. Physically, the connection is a DSL. Currently we have a linux server in one location that provide files over... (4 Replies)
Hey everyone. I have a problem, but it may be my lack of understanding that is the cause. Ok so I attend a technical school, and needless to say there's a lot of wannabe hackers, pranksters and what not.
So from my laptop I'd like to connect to the wireless AP's around campus, but security is a... (1 Reply)
Discussion started by: Lost in Cyberia
1 Replies
LEARN ABOUT DEBIAN
arpsend
arpsend(8) Containers arpsend(8)NAME
arpsend - send ARP requests
SYNOPSIS
arpsend -D -e target_ip [ -e target_ip ...] [-c count] [-w timeout] interface
arpsend -U -i source_ip [-c count] [-w timeout] interface
DESCRIPTION
Utility arpsend sends ARP packets on device interface to detect or update neighbours' ARP caches with a given IP.
COMMANDS
Run utility with one of the following commands:
-D Send broadcast ARP request to detect neighbours with target_ip. You have to specify target_ip (-e option).
-U Send broadcast ARP request to update neighbours' ARP caches with source_ip. You have to specify source_ip (-i option).
OPTIONS -c count
Number of packets to send. Default is infinity.
-w interval
Interval between packets, in seconds. Default is 1 second.
-i source_ip_address
Set source IP address field in ARP packet.
-e target_ip_address
Set target IP address field in ARP packet. Note that you can specify -e option multiple times to detect many IP addresses in one
utility call.
EXIT STATUS
arpsend returns 0 upon successful execution. If something goes wrong, it returns an appropriate error code.
1 EXC_USAGE
Usage error
2 EXC_SYSTEM
System error
3 EXC_RECV
ARP reply was received
EXAMPLES
To send request on interface eth0 to detect any neighbour computers with IP 192.168.10.200:
arpsend -D -e 192.168.10.200 eth0
To send request on interface eth0 to update neighbours' ARP caches with IP 192.168.10.200:
arpsend -U -i 192.168.10.200 eth0
NOTES
Interface you use have to be arpable and not be loopback (i.e. /sbin/ip link show interface should show neither NOARP nor LOOPBACK flags
in interface parameters).
SEE ALSO vzctl(8).
LICENSE
Copyright (C) 2000-2011, Parallels, Inc. Licensed under GNU GPL.
OpenVZ 28 Jun 2011 arpsend(8)