The default gateway is 192.168.10.1
iPv4 routing is already enabled and working.
With vpnc I've built up an VPN connection and can access my home network (192.168.0.0/24) about the tun0 interface.
I want to leave the default gateway from 192.168.10.0/24 unchanged, but I want access the whole internet traffic vom 192.168.11.0/24 trough the VPN connection.
Unfortunately I don't get ideas in my head how I could solve this problem.
Thanks for your help and Merry Christmas
regards
Last edited by jim mcnamara; 12-24-2015 at 12:17 AM..
Hi All:
I need a script that can be timed to run every half hour to an hour to run a traceroute through a VPN to test that a connection is still up from a Win XP system. Which would be the best, C++ or Perl and what are some good resources to look at.
(If anyone has a script to do this... (1 Reply)
I'm having fedora core4.I have a ADSL modem and can access through Windows.I tried setting up internet connection in linux using setup command and netconfig,but doesn't work. can anybody help me with the steps in detail.also can i use the same ip address as in windows? (7 Replies)
Hello,
I have question about VPN connection thats,
I have two networks
1-Office Network
2-Home Network
both are connected to internet
i have in Office network PPTP VPN Server with real or static ip and on the home network all clients working with local ip
Now ,
I need to connect to... (3 Replies)
I got solaris 10 works, but I cannot set up my internet connection. When I ping a website and i open the web browser, it doesn't work.
When the installation asked 'Am I in a network?' i answerd 'no'. I think this is my minstake. How can i get Internet, now?
I have a ADSL modem (not router).... (5 Replies)
I would like to know if anyone has a way to PRINT TO a printer attached to a Windows 7 PC, from SCO, while logged in via a VPN connection.
I am able to attach to a Samba share on the SCO server for files while attached to the VPN, so I know my Samba is workling - but my print jobs return:
... (2 Replies)
I have a Cisco 1841 router configured as Easy VPN Server. Here is the configuration of the router:
Cisco# Cisco#show running-config Building configuration... Current configura - Pastebin.com
I have a Centos 5.7 server with installed Cisco VPN client for Linux. The client successfully... (0 Replies)
Dear all,
Hope you are all fine & enjoying your good health.
Look at this equation
1+1+1=3
So simple I just want to say that I have three internet connections of 1mb, 1mb & 1mb but I can use only 1mb connection at a time & other two connections are useless for me. But now I want to make all... (0 Replies)
Hello all,
Recently took a dive into Unix using Fedora 12 atm. I have cable modem with DHCP and a linksys 8 port router. With windows I was able to simple use the uplink port and plug each computer into the switch and use the internet connection. Having no luck doing the same in Unix. I have... (0 Replies)
On this forum was already posted similar question, but it was 4 years ago and didn't give me answers.
I have two groups of engineers that works in far locations connected via VPN. Physically, the connection is a DSL. Currently we have a linux server in one location that provide files over... (4 Replies)
Hey everyone. I have a problem, but it may be my lack of understanding that is the cause. Ok so I attend a technical school, and needless to say there's a lot of wannabe hackers, pranksters and what not.
So from my laptop I'd like to connect to the wireless AP's around campus, but security is a... (1 Reply)
Discussion started by: Lost in Cyberia
1 Replies
LEARN ABOUT DEBIAN
ifscheme-mapping
IFSCHEME(8) Commands IFSCHEME(8)NAME
ifscheme - scheme control for network interfaces
SYNOPSIS
ifscheme [-v] [[-s] newscheme]
mapping <interface> script ifscheme-mapping
DESCRIPTION
ifscheme allows you to change network configuraton schemes or query the current scheme. It integrates with the ifup(8) command and inter-
faces(5). For example, you might use this program to configure a "home" scheme and a "work" scheme for a network device on a laptop. When
you move between home and work, a simple command can reconfigure your networking.
If you run the program with no parameters, it will tell what the current network scheme is.
The ifscheme-mapping utility is used to tell the ifup and ifdown utilities about the current scheme.
OPTIONS -v
--verbose
Run in verbose mode. This is passed in to the ifup and ifdown programs as well.
-l
--list list all schemes available/defined in /etc/network/interfaces.
newscheme
-s newscheme
--scheme newscheme
Change to a new network configuration scheme. When the scheme is changed, network interfaces that were using the old scheme will be
taken down and brought back up to use the new configuration scheme. -s or --scheme are mandatory if newscheme begins with a -.
CONFIGURATION
To make the program do anything useful when a scheme is selected, you must edit /etc/network/interfaces to add a mapping for the interface
(or interfaces) that can be controlled on a per-scheme basis. Suppose you want to control eth0 in this way. You might have an existing eth0
configuraton in there, such as:
auto eth0
iface eth0 inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
To change this so you can chose between static routing and dhcp, replace it with the following (it helps to ifdown the interface first).
auto eth0
mapping eth0
script ifscheme-mapping
iface eth0-home inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
iface eth0-work inet dhcp
Now if you run "ifscheme home" and ifup the interface, you'll get the eth0-home configuration stanza. If you run "ifscheme work", it will
be changed to the eth0-work stanza. You can add additional stanzas as desired, but the label must always be of the form <hardware inter-
face>-<scheme name>.
If you have a second interface (perhaps a wireless network card on eth1), you can duplicate the above for that interface, changing the eth0
and the configuration details as appropriate, but remember to add an iface stanza for every scheme name for the second interface.
FILES
/etc/network/interfaces
the interfaces definition file
/etc/network/run/scheme
the current scheme
/etc/network/run/ifstate
a record of the current state of the interfaces, managed by ifup and ifdown
BUGS
All schemed interfaces will have the same scheme.
Any schemed interface which does not have an entry for the current scheme and is not configured when the scheme is changed will not be suc-
cessfully configured when it is brought up.
SEE ALSO interfaces(5)ifup(8)ifdown(8)DISTRIBUTION
Redistribution is subject to the GNU public license.
AUTHORS
Joey Hess <joey@kitenet.net>, Peter Wilson <pwilson@cs.hmc.edu>
IFSCHEME(8)