Sponsored Content
Operating Systems Solaris Determine if you are in a Legacy Zone? Post 302962950 by gull04 on Monday 21st of December 2015 10:39:34 AM
Old 12-21-2015
Hi Jim,

Thanks for the reply, I haven't explained this very well. I have a couple of hundred servers here, covering Solaris 2.5.1 up to Solaris 11.2. They are probably 50/50 physical and virtual, all the virtual are zones (no LDOMS in use).

When I connect to a server, I'd like to identify it as a zone if possible. This is simple for Solaris 10 and 11, as you can use the zonename command to test.

However on Solaris 8 and 9, the servers can be either physical or virtual and running a
Code:
uname -a

will just return the OS, hostname, kernel version etc.

What I was looking for was a simple way of determining whether I was on a virtual or physical, but having spent a bit of time on this now it's looking like there is no easy way to tell.

Regards

Gull04
 

9 More Discussions You Might Find Interesting

1. Solaris

Bind zone transfer recategorises zone file?

Hi, I have a primary/slave Bind 9 setup running on a Solaris 10 platform. Everything is hunky dorey, except for when I make a zone file change and up the serial the file that is transferred to the slave looses all its comments, and the entries are place in alphabetical order. I administer many... (1 Reply)
Discussion started by: fulhamfcboy
1 Replies

2. Solaris

Solaris Zone : Non global Zone check failed

Hi All , I try to install some packages in my global zone... On the execution of the installion of the script it quits by saying the error "Non global zone check failed" Kindly help me in this regard Thanks in advance, jeganr (7 Replies)
Discussion started by: jegaraman
7 Replies

3. Solaris

Solaris Cmd to determine type of zone?

I lost my notes on the subject, but I remember running across a single Solaris command that tells you the following Global zone vs local zone Sparse local zone vs Whole Root local zone Can anyone advise? Thanks-In-Advance!! (2 Replies)
Discussion started by: ckmehta
2 Replies

4. Solaris

how to add a default gateway in a zone of different VLAN of global zone

Hi Greetings... I have an issue in connecting the zone from outside the network and it is because of default gateway. I can ping default gateway from inside the zone and not able to ping from global zone due to different VLAN issue. If i add two different gateways and restart network services,... (2 Replies)
Discussion started by: vvpotugunta
2 Replies

5. Solaris

Zone failes to boot due to mount issue, dir exists in zone.

I have two physical servers, with zones that mount local storage. We were using "raw device" in the zonecfg to point to a metadevice on the global zone (it was not mounted in the global zone at any point). It failed to mount on every boot because the directory existed in the zone. I... (6 Replies)
Discussion started by: BG_JrAdmin
6 Replies

6. Solaris

showing 2 different time zones in global zone and nonglobal zone

can some one help me out as it is showing 2 different time zones in global zone and nonglobal zone .In global zone it is showing in GMT while in nonglobal zone i it showing as PDT. System in running with solaris 10 (3 Replies)
Discussion started by: ravijanjanam12
3 Replies

7. Solaris

Scripting changes to multiple zone configurations in the same Global Zone

So this is Solaris 11.1. I have a Global zone that has several non-global zones running in it. I want to change the capped-memory.physical resources setting in ALL the zone configs of the running zones. if I were to do this manually here's what I would do: zonecfg -z zone1 select... (2 Replies)
Discussion started by: os2mac
2 Replies

8. UNIX for Advanced & Expert Users

Solaris 10: I forgot to detach a zone before zpool export. Uninstall zone?

Dear all, recently, I migrated a solaris zone from one host to another. The zone was inside of a zpool. The zpool cotains two volumes. I did the following: host1: $ zlogin zone1 shutdown -y -g0 -i0 #Zone status changes from running to installed $ zpool export zone1 host2: $ zpool... (2 Replies)
Discussion started by: custos
2 Replies

9. Solaris

Solaris 11 zone has no external network access (except to Global Zone)

Hi, hoping someone can help, its been a while since I used Solaris. After creating a NGZ (non global zone), the NGZ can access the GZ (Global Zone) and the GZ can access the NGZ (using ssh, zlogin) However, the NGZ cannot access any other netwqork devices, it can't even see the default router ... (2 Replies)
Discussion started by: GazinLincoln
2 Replies
svatophys(9r)															     svatophys(9r)

NAME
svatophys - General: Converts a system virtual address to a physical address SYNOPSIS
kern_return_t svatophys( vm_offset_t kern_addr, vm_offset_t *phys_addr ); ARGUMENTS
Specifies the kernel virtual address. Specifies a pointer to the physical address to be filled in. DESCRIPTION
The svatophys routine converts a system virtual address to the corresponding physical address. All address and data structure manipulation done within the kernel is performed using system virtual addresses. Typically, system virtual addresses are a means of mapping physical memory and I/O space, which often consists of device registers and DMA buffers. In contrast to this, devices are usually unaware of any virtual addressing and for this reason use physical addresses. You use the svatophys routine to perform this address translation. As an example of where you can use this address translation, a disk device driver can use DMA buffers to transfer blocks of data to the disk (for the case of a write operation). The data to be written to disk is present in system memory at a system virtual address known to the driver. To initiate the DMA operation, the disk driver can set up a command packet to specify a write operation to the underlying disk controller hardware. This write command packet contains (among other things) the location of the DMA buffer as a physical address and the length of the buffer. Here, the driver calls the svatophys routine to translate the system virtual address of the DMA buffer to a physical address in the command packet issued to the disk driver. RETURN VALUES
The svatophys routine returns the following: The address translation has been completed successfully. Unable to perform address transla- tion. This value indicates that the address specified by the kern_addr argument is not a valid kernel or system virtual address. svatophys(9r)
All times are GMT -4. The time now is 02:32 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy