12-10-2015
Diag -> Task Selection -> RAID Array Manager -> IBM SAS Disk Array Manager -> Create a SAS Disk Array -> sissas0 -> RAID 0 -> select a pdisk, if you see any, and make a hdisk from it. Then try to install RHEL again.
This User Gave Thanks to agent.kgb For This Post:
10 More Discussions You Might Find Interesting
1. AIX
Well i am right now working on an IBM P550 risc server with an HMC connected.. The server has 2 logical partitions (Lpar). both lpar is having Aix 5.3 installed.
Now I have a doubt.. is it possible to have Aix in one lpar and windows 2003 in another..
cheers
Bala (4 Replies)
Discussion started by: balaji_prk
4 Replies
2. AIX
Hello everybody, had a question.
Iam having a p650 box here, System Model: IBM,7038-6M2
Machine Serial Number: 1078DCC
managed system - 1 which has 2 lpars on it
i added memory to the box(made sure that memory added was in proper quads and was verified by a CE)
after i rebooted the box, the... (4 Replies)
Discussion started by: karthikosu
4 Replies
3. AIX
Whenever I assign/unassign a CDROM ( RAID CTRL ) to Active LPAR from HMC, I have to reboot the LPAR.
How can I do it without rebooting the LPARS.
POWER6 with HMC
LPARS = AIX 6.1
Any info
developerWorks : AIX and UNIX : PowerVM Forum : Moving CD-ROM/DVD-ROM dynamically ...
But... (5 Replies)
Discussion started by: filosophizer
5 Replies
4. AIX
I started the AIX install with a fiber channel disk, and let it run:
restricted by GSA ADP Schedule Contract with IBM Corp.
. . . . . << End of copyright notice for perfagent.tools >>. . . .
... (2 Replies)
Discussion started by: Gideon1a
2 Replies
5. AIX
Hello All,
Can anybody knows a command, what I can check the processes in the HMC restricted shell? :wall: (1 Reply)
Discussion started by: kalaso
1 Replies
6. AIX
Read "Migration to POWER8" article to get prepared for migration to POWER8:
link removed, advertisement (0 Replies)
Discussion started by: pave01
0 Replies
7. AIX
Hello,
Got a IBM Power8 box (S822) that I am configuring for replacement of our existing IBM machine.
Wanted to touch base with the expert community here to ensure I don't miss anything critical in my setup/config of AIX.
Did a fresh AIX 7.1 install on the internal scsi hdisk, mirror'ed... (3 Replies)
Discussion started by: c3rb3rus
3 Replies
8. AIX
Hello,
We have an Power8 System (S822) and a IBM StorWize v3700 SAN.
The OS is AIX 7.1.
With this hardware from what I read I need to download/install special SDDPCM drivers, so I did (SDDPCM VERSION 2.6.6.0 (devices.sddpcm.71.rte).
I carved my volumes in the StorWize and presented to... (3 Replies)
Discussion started by: c3rb3rus
3 Replies
9. AIX
Hi There,
First of all I'm new to *nix world, so bear with me and English is not my native tongue :)
Now I'm working on the HMC 7.3.3.0 ServPack:0 base_version:20080402.1 to make it work in VmWare (testing in Workstation)
I've got HMC installed and realized that network options in GUI... (8 Replies)
Discussion started by: JKat
8 Replies
10. AIX
wasn't quite sure which forum to post in.
What typical fence device to configure for a Power Linux PaceMaker Cluster running on the Power8 Platform (S822 Model of hardware), or what should be ordered with the S822 for use as a Fence Device? (5 Replies)
Discussion started by: mrmurdock
5 Replies
MFI(4) BSD Kernel Interfaces Manual MFI(4)
NAME
mfi -- LSI MegaRAID SAS driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device pci
device mfi
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
mfi_load="YES"
DESCRIPTION
This driver is for LSI's next generation PCI Express SAS RAID controllers. Access to RAID arrays (logical disks) from this driver is pro-
vided via /dev/mfid? device nodes. A simple management interface is also provided on a per-controller basis via the /dev/mfi? device node.
The mfi name is derived from the phrase "MegaRAID Firmware Interface", which is substantially different than the old "MegaRAID" interface and
thus requires a new driver. Older SCSI and SATA MegaRAID cards are supported by amr(4) and will not work with this driver.
Two sysctls are provided to tune the mfi driver's behavior when a request is made to remove a mounted volume. By default the driver will
disallow any requests to remove a mounted volume. If the sysctl dev.mfi.%d.delete_busy_volumes is set to 1, then the driver will allow
mounted volumes to be removed.
HARDWARE
The mfi driver supports the following hardware:
o LSI MegaRAID SAS 1078
o LSI MegaRAID SAS 8408E
o LSI MegaRAID SAS 8480E
o LSI MegaRAID SAS 9260
o Dell PERC5
o Dell PERC6
o IBM ServeRAID M5015 SAS/SATA
o IBM ServeRAID-MR10i
o Intel RAID Controller SROMBSAS18E
FILES
/dev/mfid? array/logical disk interface
/dev/mfi? management interface
DIAGNOSTICS
mfid%d: Unable to delete busy device An attempt was made to remove a mounted volume.
SEE ALSO
amr(4), pci(4), mfiutil(8)
HISTORY
The mfi driver first appeared in FreeBSD 6.1.
AUTHORS
The mfi driver and this manual page were written by Scott Long <scottl@FreeBSD.org>.
BUGS
The driver does not support big-endian architectures at this time.
BSD
May 12, 2010 BSD