12-10-2015
Diag -> Task Selection -> RAID Array Manager -> IBM SAS Disk Array Manager -> Create a SAS Disk Array -> sissas0 -> RAID 0 -> select a pdisk, if you see any, and make a hdisk from it. Then try to install RHEL again.
This User Gave Thanks to agent.kgb For This Post:
10 More Discussions You Might Find Interesting
1. AIX
Well i am right now working on an IBM P550 risc server with an HMC connected.. The server has 2 logical partitions (Lpar). both lpar is having Aix 5.3 installed.
Now I have a doubt.. is it possible to have Aix in one lpar and windows 2003 in another..
cheers
Bala (4 Replies)
Discussion started by: balaji_prk
4 Replies
2. AIX
Hello everybody, had a question.
Iam having a p650 box here, System Model: IBM,7038-6M2
Machine Serial Number: 1078DCC
managed system - 1 which has 2 lpars on it
i added memory to the box(made sure that memory added was in proper quads and was verified by a CE)
after i rebooted the box, the... (4 Replies)
Discussion started by: karthikosu
4 Replies
3. AIX
Whenever I assign/unassign a CDROM ( RAID CTRL ) to Active LPAR from HMC, I have to reboot the LPAR.
How can I do it without rebooting the LPARS.
POWER6 with HMC
LPARS = AIX 6.1
Any info
developerWorks : AIX and UNIX : PowerVM Forum : Moving CD-ROM/DVD-ROM dynamically ...
But... (5 Replies)
Discussion started by: filosophizer
5 Replies
4. AIX
I started the AIX install with a fiber channel disk, and let it run:
restricted by GSA ADP Schedule Contract with IBM Corp.
. . . . . << End of copyright notice for perfagent.tools >>. . . .
... (2 Replies)
Discussion started by: Gideon1a
2 Replies
5. AIX
Hello All,
Can anybody knows a command, what I can check the processes in the HMC restricted shell? :wall: (1 Reply)
Discussion started by: kalaso
1 Replies
6. AIX
Read "Migration to POWER8" article to get prepared for migration to POWER8:
link removed, advertisement (0 Replies)
Discussion started by: pave01
0 Replies
7. AIX
Hello,
Got a IBM Power8 box (S822) that I am configuring for replacement of our existing IBM machine.
Wanted to touch base with the expert community here to ensure I don't miss anything critical in my setup/config of AIX.
Did a fresh AIX 7.1 install on the internal scsi hdisk, mirror'ed... (3 Replies)
Discussion started by: c3rb3rus
3 Replies
8. AIX
Hello,
We have an Power8 System (S822) and a IBM StorWize v3700 SAN.
The OS is AIX 7.1.
With this hardware from what I read I need to download/install special SDDPCM drivers, so I did (SDDPCM VERSION 2.6.6.0 (devices.sddpcm.71.rte).
I carved my volumes in the StorWize and presented to... (3 Replies)
Discussion started by: c3rb3rus
3 Replies
9. AIX
Hi There,
First of all I'm new to *nix world, so bear with me and English is not my native tongue :)
Now I'm working on the HMC 7.3.3.0 ServPack:0 base_version:20080402.1 to make it work in VmWare (testing in Workstation)
I've got HMC installed and realized that network options in GUI... (8 Replies)
Discussion started by: JKat
8 Replies
10. AIX
wasn't quite sure which forum to post in.
What typical fence device to configure for a Power Linux PaceMaker Cluster running on the Power8 Platform (S822 Model of hardware), or what should be ordered with the S822 for use as a Fence Device? (5 Replies)
Discussion started by: mrmurdock
5 Replies
LEARN ABOUT OPENSOLARIS
mega_sas
mega_sas(7D) Devices mega_sas(7D)
NAME
mega_sas - SCSI HBA driver for LSI MegaRAID SAS controller
DESCRIPTION
The mega_sas MegaRAID controller host bus adapter driver is a SCSA-compliant nexus driver that supports the Dell PERC 5/E, 5/i, 6/E and
6/i RAID controllers, the IBM ServeRAID-MR10k SAS/SATA controller and the LSI MegaRAID SAS/SATA 8308ELP, 8344ELP, 84016E, 8408ELP,
8480ELP, 8704ELP, 8704EM2, 8708ELP, 8708EM2, 8880EM2 and 8888ELP series of controllers.
Supported RAID features include RAID levels 0, 1, 5, and 6, RAID spans 10, 50 and 60, online capacity expansion (OCE), online RAID level
migration (RLM), auto resume after loss of system power during arrays, array rebuild or reconstruction (RLM) and configurable stripe size
up to 1MB. Additional supported RAID features include check consistency for background data integrity, patrol read for media scanning and
repairing, 64 logical drive support, up to 64TB LUN support, automatic rebuild and global and dedicated hot spare support.
CONFIGURATION
The mega_sas.conf file contains no user configurable parameters. Please configure your hardware through the related BIOS utility or the
MegaCli configuration utility. If you want to install to a drive attached to a mega_sas HBA, you should create the virtual drive first
from the BIOS before running the Solaris install. You can obtain the MegaCli utility from the LSI website.
The mega_sas device can support up to 64 virtual disks. Note that BIOS numbers the virtual disks as 1 through 64, however in the Solaris
operating environment virtual disks are numbered from 0 to 63. Also note that SAS and SATA drives cannot be configured into the same vir-
tual disk.
KNOWN PROBLEMS AND LIMITATIONS
The mega_sas driver does not support the LSI MegaRAID SAS 8204ELP, 8204XLP, 8208ELP, and 8208XLP controllers.
FILES
/kernel/drv/mega_sas 32-bit ELF kernel module. (x86)
/kernel/drv/amd64/mega_sas 64-bit kernel module. (x86)
/kernel/drv/mega_sas.conf Driver configuration file (contains no user-configurable options).
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86-based systems |
+-----------------------------+-----------------------------+
|Availability |SUNWmegasas |
+-----------------------------+-----------------------------+
|Interface stability |Uncommitted |
+-----------------------------+-----------------------------+
SEE ALSO
prtconf(1M), attributes(5), sata(7D), scsi_hba_attach_setup(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_inquiry(9S), scsi_device(9S),
scsi_pkt(9S)
Small Computer System Interface-2 (SCSI-2)
SunOS 5.11 14 Aug 2008 mega_sas(7D)