11-23-2015
the new system disk is connected separetly on sata on board port and the old hard disks connected sas on backplane that coneccted to the Raid mega sas card LSI
---------- Post updated at 01:16 PM ---------- Previous update was at 12:01 PM ----------
-the sata disk (system disk) is connected and i'm booting from it
-the mega sas controller is connected and the old configuration is still configured
-the old 3 hard disk configured from LSI bios
the case now that i cant see the 3 SAS hard disks from the installed sco on sata disk.
PS: i'm booting from the sata disk as u advised.
how to install the LSI SAS S2108 (D2616) after the sco unixware 7.1.4 installed on SATA disk ? to let the old 3 H.Ds (SAS) can be accessible from SATA disk to mount the corrupted /etc ?
i'm stuck on this step !!
8 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
I am using SCO Unixware 2.1 & some PC clients are connected, suddenly one message appearslike :
UX:strintercept error: dropping message
this message starts coming repeatedly & agtre some time system hangs.I had to reset the system & now the problem is not there.Please suggest, why this is... (0 Replies)
Discussion started by: paprch
0 Replies
2. UNIX for Dummies Questions & Answers
According to this thread: https://www.unix.com/showthread.php?t=1 one guy says However, I cannot find any sco unixware7 iso download link in their download section (http://wdb1.sco.com/clbk_web/owa/dwn_customer), is it really for free, and if that is true, where can I download it?
Thanks, (2 Replies)
Discussion started by: phalcos
2 Replies
3. SCO
Please help me in troubleshooting my problem in Samba?
I tried to instal Samba 3.0.24 in our SCO UnixWare 7.1.4 but after installing the nmbd daemon is not running.
When i check the syslog from /var/adm, the following error appears:
Sep 30 13:04:22 unixeei nmbd: bind failed on port 137... (0 Replies)
Discussion started by: eric_hing
0 Replies
4. SCO
hi,
anybody can give procedure for how to install oracle 8.0.5 in sco unixware 7.1.4. (0 Replies)
Discussion started by: prakrithi
0 Replies
5. UNIX for Dummies Questions & Answers
Hi All
I P2Vd a Unixware 7.1.4 box with VMWare Vsphere. I try to add a network adapter under Network Configuration Manager and it comes up with the error attached.
I've added a virtual adapter using the "E1000" option. It detects both the AMD PCI NET and E1000 virtual adapters under Network... (8 Replies)
Discussion started by: flashinwrx
8 Replies
6. SCO
We are retiring a Unixware 7.1 server that has custom applications on it. It has Raid 5 and we would like to use the machine for other things. Is there a way we can image/clone to virtual machine file and run that VM within say Virtual PC 2007 or VMware? I am not aware of anything to do this. I... (20 Replies)
Discussion started by: ccd1977
20 Replies
7. SCO
(sorry my English, is really poor).
I have a SCO Unixware 7.1.1 and I need install in ML350 G3. Reading in google and HP web, make a floppy disks for install, but the options that I have is for network or floppy disk.
How install from CD with patch for HP smart array 532 ??
or
How... (5 Replies)
Discussion started by: xplertor
5 Replies
8. SCO
Hi, I'm new to this Unix world and have taken over looking after the I.T side of things at work, which includes the internal ERP system which runs on a UNIX SCO platform.
My initial worry is what state this is in as its been on site over 20 years.
What would be the first things to check on... (13 Replies)
Discussion started by: Mick_Dundee
13 Replies
LEARN ABOUT OPENSOLARIS
ahci
ahci(7D) Devices ahci(7D)
NAME
ahci - Advanced Host Controller Interface SATA controller driver
SYNOPSIS
sata@unit-address
DESCRIPTION
The ahci driver is a SATA framework-compliant HBA driver that supports SATA HBA controllers that are compatible with the Advanced Host Con-
troller Interface 1.0 specification. AHCI is an Intel-developed protocol that describes the register-level interface for host controllers
for serial ATA 1.0a and Serial ATA II. The AHCI 1.0 specification describes the interface between the system software and the host con-
troller hardware.
The ahci driver currently supports the Intel ICH6/7/8/9, VIA vt8251 and JMicron AHCI controllers which are compliant with the Advanced Host
Controller Interface 1.0 specification. Note that while the Intel ICH6/7/8/9, VIA vt8251 and JMicron AHCI controllers support standard
SATA features, the ahci driver currently only supports hard disk, ATAPI SATA DVD, hotplug and NCQ (Native command queuing). Port multiplier
and power management are not yet supported.
CONFIGURATION
The ahci module contains no user configurable parameters.
FILES
/kernel/drv/ahci
32-bit ELF kernel module (x86).
/kernel/drv/amd64/ahci
64-bit ELF kernel module (x86).
ATTRIBUTES
See attributes(5) for descriptions of the following attribute:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86 |
+-----------------------------+-----------------------------+
|Availability |SUNWahci |
+-----------------------------+-----------------------------+
SEE ALSO
cfgadm(1M), cfgadm_sata(1M), prtconf(1M), sata(7D)
Advanced Host Controller Interface 1.0
Writing Device Drivers
NOTES
To bind the ahci driver to your controller, choose the [AHCI] BIOS option.
Note that booting is not supported if toggle exists between the [IDE] and [AHCI] BIOS options
SunOS 5.11 22 Jan 2008 ahci(7D)