Sponsored Content
Full Discussion: Moving to RAID1
Operating Systems Solaris Moving to RAID1 Post 302960650 by hicksd8 on Wednesday 18th of November 2015 05:29:23 AM
Old 11-18-2015
The first question is what sort of RAID1 on you talking; hardware built-in (using raidctl command) , hardware add-in (using third party software) or software (using meta)?

What hardware is it?

Are you wanting to mirror the root filesystem or a data drive?
This User Gave Thanks to hicksd8 For This Post:
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

How can i set up Software disk mirroring(Raid1) in SCO 5.0.5 with two SCSI harddisk ?

thank u very much, (1 Reply)
Discussion started by: coralsea
1 Replies

2. Filesystems, Disks and Memory

Pulling a drive on RAID1 hangs system

I'm setting up a server with software RAID1, and everything is working perfectly, except that when I pull either of the drives, the system completely hangs and has to be rebooted. The computer is a Tyan Transport GX28, which is alleged to have hot-swappable SATA. I can fail a drive and the system... (1 Reply)
Discussion started by: vertigo23
1 Replies

3. Solaris

RAID1 and LDoms

I have a Netra T5220 Solaris 10 server with LDoms installed and enabled. RAID1 is enabled in the control domain with the following slices: d50 -m d51 d52 1 d51 1 1 c1t0d0s5 d52 1 1 c1t1d0s5 d10 -m d11 d12 1 d11 1 1 c1t0d0s0 d12 1 1 c1t1d0s0 d20 -m d21 d22 1 d21 1 1 c1t0d0s1 d22 1 1... (14 Replies)
Discussion started by: StarSol
14 Replies

4. AIX

rootvg and hardware raid1

Good Morning, We have a JS22 blade that we will be loading AIX5.3 onto it. We just discovered that the JS22 will only support one drive, so we are planning on booting this blade from the Fiber Channel SAN. Orginally we used 2 physical drives and set up RAID 1 and presented the logical drive... (0 Replies)
Discussion started by: brachinus
0 Replies

5. UNIX for Advanced & Expert Users

how to create multiple-boot system with disks mirrored(RAID1+0) and disk alone

I have a HP proliant ML 570 G3 with two 146GB disk drives mirrored(RAID1+0) windows server 2003 was installed on that disk. I will add a disk.(scsi 300GB) I will install Linux on that additional disk. I want to create multiple-boot system. Is it possible? I wanna know how to create... (0 Replies)
Discussion started by: lifegeek
0 Replies

6. Filesystems, Disks and Memory

Solaris 10 Raid1

does anyone k ow the answer to this? OS solaris 10 using the command raidctl -c c1t0d0 c1t1d0, this took about 4 mins to return to the prompt with "Volume c1t0d0 is created successfully!" then using format I saw AVAILABLE DISK SELECTIONS: 0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>... (1 Reply)
Discussion started by: powerrack
1 Replies

7. Linux

SPARC, Linux, RAID1, SILO

Hi, I've been searching for answers for two days and didn't find any definite answers on building RAID1 on SPARC. The main problem was with SILO (Sparc Improved boot LOader): can it boot from RAID partition or not. So I just tried it and it works. I've done this on Debian, but it should be... (0 Replies)
Discussion started by: Luka
0 Replies

8. Linux

raid1 (dmraid) - bad sectors - mount - smartd - complicated!

Hello, i'm running a server with two disks in raid1.. it seems that some bad sectors have recently appeared on one of the disks. Aug 9 08:26:19 linux smartd: Device: /dev/sda, FAILED SMART self-check. BACK UP DATA NOW! Aug 9 08:26:19 linux smartd: Device: /dev/sda, 2 Currently... (0 Replies)
Discussion started by: TehOne
0 Replies

9. Ubuntu

Ubuntu desktop RAID1 boot problem.

Hello, I installed ubuntu desktop just recently in aim to create a RAID1 configuration using software RAID MDADM. I have the following configuration as fdisk -l reports: Disk /dev/sda: 223,6 GiB, 240057409536 bytes, 468862128 sectors Units: sectors of 1 * 512 = 512 bytes Sector size... (5 Replies)
Discussion started by: Reol
5 Replies

10. Ubuntu

Samba share on software raid1

Hello! i am having a ubuntu server with two empty disks and connected software raid1 to it. I am having /mnt/raid folder which i created to mount it. SO should i now make a share folder inside that or what? I ama bit confused when a raid is present. (27 Replies)
Discussion started by: tomislav91
27 Replies
Match-all classifier in tc(8)                                          Linux                                         Match-all classifier in tc(8)

NAME
matchall - traffic control filter that matches every packet SYNOPSIS
tc filter ... matchall [ skip_sw | skip_hw ] [ action ACTION_SPEC ] [ classid CLASSID ] DESCRIPTION
The matchall filter allows to classify every packet that flows on the port and run a action on it. OPTIONS
action ACTION_SPEC Apply an action from the generic actions framework on matching packets. classid CLASSID Push matching packets into the class identified by CLASSID. skip_sw Do not process filter by software. If hardware has no offload support for this filter, or TC offload is not enabled for the inter- face, operation will fail. skip_hw Do not process filter by hardware. EXAMPLES
To create ingress mirroring from port eth1 to port eth2: tc qdisc add dev eth1 handle ffff: ingress tc filter add dev eth1 parent ffff: matchall skip_sw action mirred egress mirror dev eth2 The first command creats an ingress qdisc with handle ffff: on device eth1 where the second command attaches a matchall filters on it that mirrors the packets to device eth2. To create egress mirroring from port eth1 to port eth2: tc qdisc add dev eth1 handle 1: root prio tc filter add dev eth1 parent 1: matchall skip_sw action mirred egress mirror dev eth2 The first command creats an egress qdisc with handle 1: that replaces the root qdisc on device eth1 where the second command attaches a matchall filters on it that mirrors the packets to device eth2. To sample one of every 100 packets flowing into interface eth0 to psample group 12: tc qdisc add dev eth0 handle ffff: ingress tc filter add dev eth0 parent ffff: matchall action sample rate 100 group 12 SEE ALSO
tc(8), iproute2 21 Oct 2015 Match-all classifier in tc(8)
All times are GMT -4. The time now is 01:43 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy