Sponsored Content
Special Forums Hardware Hp-dl580 g7 offline logs collection Post 302959115 by taherahmed on Thursday 29th of October 2015 01:03:52 AM
Old 10-29-2015
Wrench Hp-dl580 g7 offline logs collection

Offline Log Collection Steps:-

A. Offline Test Report (3 Loop) .
1. Boot the server with Smart Start CD.
2. Select language - English.
3. Select Maintain server.
4. Select Diagnose Server.
5. In Test Tab
Test mode - Unattended.
Number of loops - 3.
Devices - All.
Select Complete test and click the begin test option and save the report after completing the test.

B. Survey Report.
1. Boot the server with Smart Start CD.
2. Select language - English.
3. Select Maintain server.
4. Select Diagnose Server.
5. In survey Tab
Select Category >> ALL.
Select View Level >> Advanced.
And save the report.

C. Offline IML logs.
1. Boot the server with Smart Start CD.
2. Select language - English.
3. Select Maintain server.
4. Select Diagnose Server.
5. In Log tab
Select Integrated Management Log and save the report.


D. Offline ADU report:
1. Boot the server with Smart Start CD.
2. Select language - English.
3. Select Maintain server.
4. Diagnose array Option.
5. Save the report.

Note: - To save the generated reports USB pen drive is needed.



 

5 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Grep yesterday logs from weblogic logs

Hi, I am trying to write a script which would go search and get the info from the logs based on yesterday timestamp and write yesterday logs in new file. The log file format is as follows: """"""""""""""""""""""""""... (3 Replies)
Discussion started by: harish.parker
3 Replies

2. AIX

Help with data collection please?

Hello, I have about 200 different files that I need to get data from. Can someone help with a script that will: 1. Find the files 2. Parse the file for a specific number 3. collect a number to a file (probably) 4. add up the numbers 5. spit out the total. Think it's possible? BTW -... (3 Replies)
Discussion started by: bbbngowc
3 Replies

3. Solaris

Offline HBA.

Hi, I have a HBA that is currently offline for some unknown reason. The device shows up in the prtdiag -v stating it is okay. How can I bring this back online? It was working okay until recently. It is currently connected to the SAN. Details below. # fcinfo hba-port HBA Port WWN:... (7 Replies)
Discussion started by: sparcman
7 Replies

4. Shell Programming and Scripting

If I ran perl script again,old logs should move with today date and new logs should generate.

Appreciate help for the below issue. Im using below code.....I dont want to attach the logs when I ran the perl twice...I just want to take backup with today date and generate new logs...What I need to do for the below scirpt.............. 1)if logs exist it should move the logs with extention... (1 Reply)
Discussion started by: Sanjeev G
1 Replies

5. UNIX for Beginners Questions & Answers

Some % of Garbage Collection

I need to write a python script that will look at the local gc logs. 6 sys=0.00, real=0.06 secs] 2019-06-05T07:43:12.029-0500: 1072696.494: 2791209K->1995953K(2796544K)] 2803355K->1995953K(4164608K), , 3.0299555 secs] 2019-06-05T07:43:17.149-0500: 1072701.614: 3334321K->2008193K(4167680K),... (1 Reply)
Discussion started by: xgringo
1 Replies
if_mpadm(1M)						  System Administration Commands					      if_mpadm(1M)

NAME
if_mpadm - administer interfaces in an IP multipathing group SYNOPSIS
if_mpadm -d | -r ifname DESCRIPTION
The if_mpadm utility administers IP interfaces that are part of an IP Multipathing (IPMP) group. Currently, administration is limited to offlining IP interfaces and undoing previous offline operations. When an IP interface is taken offline, all IP data traffic that was flowing over the IP interface is moved to another IP interface in the IPMP group. In addition, all UP IP addresses hosted on the IP interface are brought down, causing in.mpathd(1M) to stop probe-based failure detection on the IP interface. As a result, an offline IP interface will not be used for any inbound or outbound IP traffic. Only IP inter- faces that are in an IPMP group may be brought offline. If the IP interface is the last functioning interface in the IPMP group, the off- line operation will fail. When an offline operation is undone, any IP addresses hosted on that IP interface are brought UP and will be considered by in.mpathd for probe-based failure detection. In addition, provided the IP interface is otherwise active (see in.mpathd(1M)), it will again be used to send and receive IP data traffic for the IPMP group. Note that not all offline operations can be undone. For instance, in.mpathd may have offlined an IP interface because its hardware address was not unique within its IPMP group. The ipmpstat utility can be used to determine why an IP interface is offline, identify which IP interfaces in a group are being used for inbound and outbound IP traffic, and more; see ipmpstat(1M). OPTIONS
The if_mpadm utility supports the following options: -d ifname Offline the IP interface specified by ifname. If ifname is not in an IPMP group, or the offline would cause the IPMP group to lose network connectivity, the operation will fail. -r ifname Undo a previous offline of the IP interface specified by ifname. If ifname is not offline, the operation will fail. EXAMPLES
Example 1 Offlining an IP Interface The following command offlines the IP interface under0, causing any IP packets that were being sent and received through it to be handled by another IP interface in its group. example% if_mpadm -d under0 Example 2 Undoing a Previous Offline Operation Use the following command to undo the operation in the previous example: example% if_mpdadm -r under0 ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ |Interface Stability |Unstable | +-----------------------------+-----------------------------+ SEE ALSO
ifconfig(1M), in.mpathd(1M), ipmpstat(1M), attributes(5) DIAGNOSTICS
cannot offline: no other functioning interfaces are in its IPMP group. Description: This message means that offlining the IP interface would leave the IPMP group without network connectivity. cannot offline: not a physical interface or not in an IPMP group Description: This means that the IP interface is not an underlying interface in an IPMP group, and therefore is not eligible to be offlined. SunOS 5.11 5 Jan 2009 if_mpadm(1M)
All times are GMT -4. The time now is 09:43 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy