I am trying to view the hba cards on a rhel7 server (storage says they are there, but I am not seeing them.
I tried
I tried looking in /sys/class/fc_host.. but it is empty.
I am not sure if I am looking in the right spot or if the above command is still valid.
thanks,
Gary
Last edited by vbe; 10-28-2015 at 11:41 AM..
Reason: code tags - even fo so little...
Has anyone ever relocated an HBA card after already having it configured in another PCI slot? I've found that the HBA instance #'s start incrementing past the previous. It results in me having to have my instance numbers in /kernel/drv/qla2300.conf be 4,5,6,7 instead of 0,1,2,3. Cleanup with... (5 Replies)
Hi all,
I have a compatibly issues with a new hardware
My config is the following one :
Solaris 10
V490 Hardware
2 X HBA Qlogic 2310f cards
An HP EVA 5000 for storage ...
Veritas VxVM 4.1 MP1
When I reboot my server, VxVM is trying to mount/use the volume before it's... (0 Replies)
Due to speed mismatch, the server kept crashing. Sun suggests that I need to move the two HBA cards from the 66Mhz to the 33Mhz slots. There are tons of disks that are connected to these HBAs and I have Veritas volume manager.
Does anyone have a list of what I need to do prior/after moving to... (3 Replies)
Hi,
I'm trying to determine which HBA cards are installed on my Solaris 10 (Sun-Fire-V240) machine.
The relevant data I have is below, but from it I cannot ascertain for sure if I have Emulex 10000 or 11000 HBA cards.
Can anyone suggest how to determine my HBA hardware ?
Thanks,
Ron.
... (3 Replies)
Hi,
I'm trying to determine which HBA cards are installed on my Solaris 10 (Sun-Fire-V240) machine.
The relevant data I have is below, but from it I cannot ascertain for sure if I have Emulex 10000 or 11000 HBA cards.
Can anyone suggest how to determine my HBA hardware ?
Thanks,
Ron.
... (4 Replies)
Hiii... Every one....
I want to know the command to get the details and number of HBA cards
attached to a server.
I know that we can use "powermt display", but nither my cards are connected to the storage nor powerpath is active.
I am using SUN server with Solaris -9.
Thanks in... (4 Replies)
Hi All,
I have a task to complete on several server, I need advice from u guys,i need to know that , how can i check the following thing in AIX server.
1)HBA vendor, HBA model, HBA driver version & HBA firmware.
2) Multipath software & multipath version.
3) Cluster software & cluster... (2 Replies)
Hi,
The title is a bit misleading, but it seems I can't re-edit the title after creating the post - apologies.
I have been handed a variety of servers, whereas quite a few of these are older FreeBSD (4.8, thank you legacy). I now have one of these servers which has a HBA card installed, and... (0 Replies)
Hi,
What I would like to do is to grep and view the results in a separate gvim window all in a single command. Something like:
view_this_stdout_in_gvim < grep something my_path/
And not just for grep, but for any command's STDOUT...
How can I do this in csh / tcsh ?
Thanks,
SK (1 Reply)
Discussion started by: shahark
1 Replies
LEARN ABOUT DEBIAN
ql-hba-snapshot
ql-hba-snapshot(8) System Administration ql-hba-snapshot(8)NAME
ql-hba-snapshot - display specific information of the QLogic HBA.
SYNOPSIS
ql-hba-snapshot <Host number> [OPTIONS]
DESCRIPTION
FC HBA Snapshot Utility
This utility displays the details of the QLogic HBA attached to the system. It uses one of the two file systems for scanning: proc or
sysfs.
<Host number> | <-a/--all> [optional]
Provide the <HOST NUMBER> to display the detailed information of the HBA. With no option specified, general information of all
hosts will be displayed. Ex. # /usr/sbin/ql-hba-snapshot <Host Number> # /usr/sbin/ql-hba-snapshot --procfs <Host Number> (For
procfs)
-h, --help
Prints the help message. Ex. # /usr/sbin/ql-hba-snapshot --help
-hl, --hostlist
This option displays the list of QLogic hosts (HBAs) connected to this system. The <HOST NUMBER> can be obtained by using following
command Ex. # /usr/sbin/ql-hba-snapshot --hostlist
-p, --parameters
This option displays the command line parameters that can be passed to the QLogic HBA driver. Ex. # /usr/sbin/ql-hba-snapshot
--parameters <Host Number>
-s, --statistics
This option displays the statistical information for specified host. Stastics option is only supported in "sysfs" based scan. Ex.
# /usr/sbin/ql-hba-snapshot --statistics <Host number/--all>
-proc, --procfs
This options forces the the utility to scans information based on "procfs", instead of default sysfs. Ex. # /usr/sbin/ql-hba-snap-
shot --procfs [Other valid option]
-v, --verbose
This enables verbose display. The detailed information of LUNs will be displayed in addition to standard one. This option is only
supported in sysfs. Ex. # /usr/sbin/ql-hba-snapshot --verbose <Host number/-a>
SEE ALSO ql-dynamic-tgt-lun-disc(8), ql-lun-state-online(8), ql-set-cmd-timeout(8)Matthias Schmitz <matthias@sigxcpu.org> July 2009 ql-hba-snapshot(8)