I have some matlab code that sends the serial port elements of an array using matlab's fwrite function, e.g.:
What would be a unix shell equivalent? E.g., after successfully accessing the port using instructions here:
ANy one knows equivalent function of which in Turbo C.
I want to Execute Certain loop until any key is pressed.
i.e while(!kbhit)
{
----------
----------
}
This code work fine in DOS but NOt in LINUX
i try to use but not getting the expected result
... (0 Replies)
Hello,
I need experts help in converting the below tcl function to korn shell function equivalent.
proc lsNetMaskToBits {mask} {
set dw ; # Top N bits set
set dw 0x ; # Make sure it's hexadecimal, else XOR fails.
puts "lsNetMaskToBits dw $dw"
set dw ; # Complement => low 32-N bits... (1 Reply)
Hi,
my code is written in proC and it is in UNIX(AIX).I have written a small code for writing data into a binary file,but while writing my program is giving core dump.
Here Is my code----
fpWriteFile = fopen(WriteFileName,"wb+");
CHAR *recvgen;
recvgen = (char... (7 Replies)
Hello everyone,
i need help with this , i need the equivalent matlab funtion tf(x,y) in scilab
and what do u recommend best from those three for a linux user (i need it for Control theory):
1-matlab
2-Scilab
3-Octave
thank you for your time (0 Replies)
I'm running a matlab code within a shell script. This is how I do it,
matlab -nodesktop -nosplash -nojvm -r "my_program;quit"
This works fine. My matlab code prints out a single number, say "ans = 10" for example. I want to assign this to a variable in the shell script.
I tried doing this... (18 Replies)
The fwrite function call is not returning error, when the file it writes to is removed, please advise on how to find if the file already opened and being written by a program is removed manually or by some other process.
please see the code below,
#include<stdio.h>
#include<stdlib.h>
... (3 Replies)
Hi all
Does anyone know Java-Arrays.binarySearch function equivalent in awk
I tried like this but it's not correct one,it just returns array index if and only when searched value available in array, for some reason if searched value not found then I want to return upper nearest neighbour index.... (1 Reply)
Hi all,
I am learning POSIX shell programming, and the book I read, uses the let command for integer arithmetic.
I have downloaded and use the shellcheck program on Linux.
This programs says:
In POSIX sh, 'let' is undefined.
See the screenshot attached.
What is the POSIX... (1 Reply)
Discussion started by: johnprogrammer
1 Replies
LEARN ABOUT OSF1
ports
ports(7) Miscellaneous Information Manual ports(7)NAME
ports, port_names - Device (tty and lp) names for serial and parallel ports
SYNOPSIS
Default Serial Ports:
/dev/tty00
/dev/tty01 (not present on a single-port system)
Parallel Port:
/dev/lp0
DESCRIPTION
AlphaStation and AlphaServer systems provide one or two 9-pin serial communication ports. These ports are usually labelled 1 (COMM1) and 2
(COMM2), but they may be identified by different icons. Using the appropriate serial cable and terminator, you can connect a serial
printer, external modem, or character-cell terminal to a serial port. Most AlphaStation and AlphaServer systems also provide one parallel
port, for use with a parallel printer.
When you add a device to your system, the installation documentation may instruct you to map the device pathname to the port. These
devices are located in the /dev directory.
For serial-line ports, the two default device pathnames are: This pathname always maps to 1, COMM1, the lowest port number, an icon for a
terminal console, or the only serial port (on a single-port system). This pathname always maps to 2, COMM2, the next numbered port, or (if
one serial port is labeled with an icon for a terminal console) the remaining serial port.
If your system hardware has been extended to include additional serial ports, the pathnames /dev/tty02, /dev/tty03, and so forth, may also
be available to you. However, most systems have only /dev/tty00 and /dev/tty01 as the device pathnames for serial ports.
The one parallel port on an AlphaStation or AlphaServer may be labeled with the word printer or a printer icon. On some systems, the paral-
lel port may not be labeled. The device pathname for the parallel port is /dev/lp0. Currently, Tru64 UNIX does not fully support parallel
printers, so fewer devices are connected to this port as compared to serial ports.
If you are connecting a terminal console to your system, it must be connected to the serial port mapped to /dev/tty00. For other serial
devices, it does not matter which of the serial ports you choose for the connection. For example, suppose you are setting up a system that
has two serial ports, labeled 1 and 2. You intend to use a serial-line terminal rather than a workstation monitor as the system console and
also want to connect a serial-line printer to the system. In this case, you must connect the terminal to the port labeled 1 (with the
device pathname /dev/tty00). Therefore, you must connect the printer to the remaining port labeled 2 (with the device pathname /dev/tty01).
If, for the same type of system, you intend to use a workstation monitor as the system console, it does not matter which serial port you
use for a serial-line printer or modem. In other words, you can connect the printer to either port 1 (with pathname /dev/tty00) or port 2
(with pathname /dev/tty01). When prompted to enter a /dev/tty** pathname by the lprsetup script or the Print configuration tool in the CDE
Application Manager, you would specify /dev/tty00 if you connected the printer to port 1 or /dev/tty01 if you connected the printer to port
2.
See the System Administration manual for more information on setting up consoles (including remote consoles) and printers. See the
modem(7) reference page for more information on setting up modems.
SEE ALSO
Commands: lprsetup(8)
Devices: ace(7), modem(7)
System Administration delim off
ports(7)