when i try to boot from sco unixware 7.1.4 CD and try to install my LSA SAS driver (error cannot mount the Hba Driver)as attached, and this is the same driver i installed it before and i'm sure that it is the correct LSA driver.
i have 3 H.Ds 2*600 RAID1 + 1*600 RAID0 (as attached).
there is no emergency disk so there is anyway to access the unis file system and restore the corrupted /etc ?? ,
any idea why the HBA Driver cannot mount ? specially i think that when i go to HBA driver to load the server not looking for any driver then the error msg appears
I am using SCO Unixware 2.1 & some PC clients are connected, suddenly one message appearslike :
UX:strintercept error: dropping message
this message starts coming repeatedly & agtre some time system hangs.I had to reset the system & now the problem is not there.Please suggest, why this is... (0 Replies)
According to this thread: https://www.unix.com/showthread.php?t=1 one guy says However, I cannot find any sco unixware7 iso download link in their download section (http://wdb1.sco.com/clbk_web/owa/dwn_customer), is it really for free, and if that is true, where can I download it?
Thanks, (2 Replies)
Please help me in troubleshooting my problem in Samba?
I tried to instal Samba 3.0.24 in our SCO UnixWare 7.1.4 but after installing the nmbd daemon is not running.
When i check the syslog from /var/adm, the following error appears:
Sep 30 13:04:22 unixeei nmbd: bind failed on port 137... (0 Replies)
Hi All
I P2Vd a Unixware 7.1.4 box with VMWare Vsphere. I try to add a network adapter under Network Configuration Manager and it comes up with the error attached.
I've added a virtual adapter using the "E1000" option. It detects both the AMD PCI NET and E1000 virtual adapters under Network... (8 Replies)
We are retiring a Unixware 7.1 server that has custom applications on it. It has Raid 5 and we would like to use the machine for other things. Is there a way we can image/clone to virtual machine file and run that VM within say Virtual PC 2007 or VMware? I am not aware of anything to do this. I... (20 Replies)
(sorry my English, is really poor).
I have a SCO Unixware 7.1.1 and I need install in ML350 G3. Reading in google and HP web, make a floppy disks for install, but the options that I have is for network or floppy disk.
How install from CD with patch for HP smart array 532 ??
or
How... (5 Replies)
Hi, I'm new to this Unix world and have taken over looking after the I.T side of things at work, which includes the internal ERP system which runs on a UNIX SCO platform.
My initial worry is what state this is in as its been on site over 20 years.
What would be the first things to check on... (13 Replies)
Discussion started by: Mick_Dundee
13 Replies
LEARN ABOUT XFREE86
tran_sync_pkt
tran_sync_pkt(9E) Driver Entry Points tran_sync_pkt(9E)NAME
tran_sync_pkt - SCSI HBA memory synchronization entry point
SYNOPSIS
#include <sys/scsi/scsi.h>
void prefixtran_sync_pkt(struct scsi_address *ap, struct scsi_pkt *pkt);
INTERFACE LEVEL
Solaris architecture specific (Solaris DDI).
PARAMETERS
ap A pointer to a scsi_address(9S) structure.
pkt A pointer to a scsi_pkt(9S) structure.
DESCRIPTION
The tran_sync_pkt() vector in the scsi_hba_tran(9S) structure must be initialized during the HBA driver's attach(9E) to point to an HBA
driver entry point to be called when a target driver calls scsi_sync_pkt(9F).
tran_sync_pkt() must synchronize a HBA's or device's view of the data associated with the pkt, typically by calling ddi_dma_sync(9F). The
operation may also involve HBA hardware-specific details, such as flushing I/O caches, or stalling until hardware buffers have been
drained.
SEE ALSO attach(9E), tran_init_pkt(9E), ddi_dma_sync(9F), scsi_hba_attach(9F), scsi_init_pkt(9F), scsi_sync_pkt(9F), scsi_address(9S),
scsi_hba_tran(9S), scsi_pkt(9S)
Writing Device Drivers
NOTES
A target driver may call tran_sync_pkt() on packets for which no DMA resources were allocated.
SunOS 5.10 1 Nov 1993 tran_sync_pkt(9E)