du/df -sh is a GNU aka coreutils convention. I doubt IBM will ever support "-h" and I know coreutils is not going to support "-g" - because I asked. The answer was: we have "-h".
Anyway, to summarize what you are seeing (I switched to root, because not all directories were directly readable - saving you that)
I just type the request - and it works!
Some debugging - use full pathname for IBM AIX du
So, what am I using?
And, if you are interested in playing with coreutils on AIX (from AIX 5.3 TL7 and later) trying installing coreutils and gettext (GNU text internationalzation) from either aixtools (that I package), or from Perzl site.
The key difference is I package for installp and he packages from rpm
Hey y'all,
I need some help with the nitty gritty of the ls command.
-First off in the man pages in the -l mode the first character can be "door" can anyone tell me what a door is???
-also in the -l mode the first character can be "fifo"or"pipe" can anyone tell me what a this is???
-What... (4 Replies)
Hi,
When i run the code in solaris unix machine, the file from remote server is getting downloaded. but when i use the same code in IBM AIX remote machine, it is not running. It is saying "Erro during scp transfer." Below is the code.
Please give some resolution.
SCPClient client = new... (1 Reply)
Hi all ,
could anyone please help with find command in AIX. I am trying to find files but there are more than 30thousand files in there.I realise I need to use xargs somehow but dunno the correct way to pull this.
find /log_directory/* -prune -xdev -type f -mtime +20 | xargs ls -l
the... (2 Replies)
I'm new to this and I have done a lot of research and am 99% done with my ksh script BUT I need help with. The script looks at Journal files and reports back on any that have not been updated for 15 min. Everything works but I wanted more detail (added -ls) and now I'm getting dups.
Original code:... (2 Replies)
I need assistance with following requirement, I am new to Unix.
I want to do the following task but stuck with file creation date(sysdate)
Following is the requirement
I need to create a script that will read the abc/xyz/klm folder and look for *.err files for that day’s date and then send an... (4 Replies)
hi,
i have a fixed width file with multiple columns and need to print data using awk command.
i use: awk -F "|" '($5 == BH) {print $1,$2,$3}' <non_AIM target>.txt for a delimiter file.
but now i have a fixed width file like below:
7518 8269511BH 20141224951050N8262
11148 8269511BH... (5 Replies)
Hi,
Can someone help me out, how I can find the details of the Fonts installed on AIX,
details such as the font type, directory,
Non-Latin Fonts like Greek, Hebrew, or Arabic,
starting with Arabic
Objective: Oracle Reports creates PDF on AIX
we want to use ARABIC Fonts which are... (1 Reply)
Discussion started by: filosophizer
1 Replies
LEARN ABOUT SUSE
sane-find-scanner
sane-find-scanner(1) SANE Scanner Access Now Easy sane-find-scanner(1)NAME
sane-find-scanner - find SCSI and USB scanners and their device files
SYNOPSIS
sane-find-scanner [-h|-?] [-v] [-q] [-p] [-f] [-F filename] [devname]
DESCRIPTION
sane-find-scanner is a command-line tool to find SCSI and USB scanners and determine their Unix device files. Its primary aim is to make
sure that scanners can be detected by SANE backends.
For SCSI scanners, it checks the default generic SCSI device files (e.g., /dev/sg0) and /dev/scanner. The test is done by sending a SCSI
inquiry command and looking for a device type of "scanner" or "processor" (some old HP scanners seem to send "processor"). So
sane-find-scanner will find any SCSI scanner connected to those default device files even if it isn't supported by any SANE backend.
For USB scanners, first the USB kernel scanner device files (e.g. /dev/usb/scanner0), /dev/usb/scanner, and /dev/usbscanner) are tested.
The files are opened and the vendor and device ids are determined, if the operating system supports this feature. Currently USB scanners
are only found this way if they are supported by the Linux scanner module or the FreeBSD or OpenBSD uscanner driver. After that test,
sane-find-scanner tries to scan for USB devices found by the USB library libusb (if available). There is no special USB class for scanners,
so the heuristics used to distinguish scanners from other USB devices is not perfect. sane-find-scanner also tries to find out the type of
USB chip used in the scanner. If detected, it will be printed after the vendor and product ids. sane-find-scanner will even find USB scan-
ners, that are not supported by any SANE backend.
sane-find-scanner won't find most parallel port scanners, or scanners connected to proprietary ports. Some parallel port scanners may be
detected by sane-find-scanner -p. At the time of writing this will only detect Mustek parallel port scanners.
OPTIONS -h, -? Prints a short usage message.
-v Verbose output. If used once, sane-find-scanner shows every device name and the test result. If used twice, SCSI inquiry informa-
tion and the USB device descriptors are also printed.
-q Be quiet. Print only the devices, no comments.
-p Probe parallel port scanners.
-f Force opening all explicitly given devices as SCSI and USB devices. That's useful if sane-find-scanner is wrong in determining the
device type.
-F filename
filename is a file that contains USB descriptors in the format of /proc/bus/usb/devices as used by Linux. sane-find-scanner tries
to identify the chipset(s) of all USB scanners found in such a file. This option is useful for developers when the output of "cat
/proc/bus/usb/devices" is available but the scanner itself isn't.
devname Test device file "devname". No other devices are checked if devname is given.
EXAMPLE
sane-find-scanner -v
Check all SCSI and USB devices for available scanners and print a line for every device file.
sane-find-scanner /dev/scanner
Look for a (SCSI) scanner only at /dev/scanner and print the result.
sane-find-scanner -p
Probe for parallel port scanners.
SEE ALSO sane(7), sane-scsi(5), sane-usb(5), scanimage(1), xscanimage(1), xsane(1), sane-"backendname"(5)
AUTHOR
Oliver Rauch, Henning Meier-Geinitz and others
SUPPORTED PLATFORMS
USB support is limited to Linux (kernel, libusb), FreeBSD (kernel, libusb), NetBSD (libusb), OpenBSD (kernel, libusb). Detecting the vendor
and device ids only works with Linux or libusb.
SCSI support is available on Irix, EMX, Linux, Next, AIX, Solaris, FreeBSD, NetBSD, OpenBSD, and HP-UX.
BUGS
No support for most parallel port scanners yet.
Detection of USB chipsets is limited to a few chipsets.
13 Jul 2008 sane-find-scanner(1)