Solaris 10: how to disable an unused HBA card Post: 302957072

10 More Discussions You Might Find Interesting

1. Solaris

HBA Card

Hello...I got a problem here. I have HBAs installed in one of the domains in E20 and I gotta find out the brand and firmware. But when I do a prtconf, I cannot see the HBA. For other servers installed with HBAs, when I do prtconf on them I can see either qlc or em. Can you guys enlighten me how to...

2. Solaris

Qlogic HBA card in E450 with errors

I have installed a qlogic HBA card in an E450 Solaris 9 with all the SUNW packages and the latest EPROM version. Configuration reboot was done. An orange light flashes to the right of where the card plugs into the fiber cable after booting, and the following error apprears at the start of the boot...

3. Solaris

istall sas raid HBA internal card

I need to install a raid HBA internal card on a T5240. The reason is I have more drives and the current mother board controller does not support more than 4 drives. My question is I have raidctl set up on current drives. If I install new HBA card do I have to delete current raidctl and...

4. Solaris

Install Solaris 10 with an internal StorageTek SAS HBA Raid card

Hi all i would like to ask some suggests about my next job! I have to install a new Sun Netra T5220, with an additional internal StorageTek SAS HBA Raid. The problem come in if every disk is now controlled by the HBA, how can I install the OS? No disk is being detected by the OS. SAS card...

5. UNIX for Advanced & Expert Users

Sun internal disks and HBA card

I have a V490 that has couple internal disks attached to the same dual-port HBA card that I'm planning attach to the SAN for additional storage. Would I sacrifice performance if I use the same HBA? Is it better to throw in a new HBA instead?

6. AIX

Need HBA card driver

Hi All, SUN emulex HBA card has been installed on P520 box. When i run the cfgmgr i am getting the following message. lpar2#cfgmgr cfgmgr: 0514-621 WARNING: The following device packages are required for device support but are not currently installed....

7. Solaris

How to enable hba port of a two port hba card

Hi, i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port. ---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ---------- please help :(

8. Solaris

Extracting HBA Card Hardware info

Hello, I am very new to solaris so please bear with me. I have 2 machines in question. For both I am trying to get the HBA Card Hardware information such as: HBA Model Name HBA Firmware version HBA Port details HBA Driver details First machine is a Solaris 10. When I execute fcinfo...

9. Solaris

Which FC HBA card support Solaris9

I have JNI FCE-6460-N fc card , it is detected in OK prompt.....I connected Sun StorEDGE A5000 FC storage. in OK prompt, PROBE-SCSI-ALL showing A5000 fc hdds details in ok prompt..... but in OS level.....not showing the hdd, i tried in DEVFSADM command and FORMAT command not showing A5000...

10. Red Hat

HBA card faulty

Hi, How to determine if HBA card in getting faulty from linux host ? any pointers.

LEARN ABOUT POSIX

scsi_hba_probe

scsi_hba_probe(9F)					   Kernel Functions for Drivers 					scsi_hba_probe(9F)

NAME

       scsi_hba_probe - default SCSI HBA probe function

SYNOPSIS

       #include <sys/scsi/scsi.h>

       int scsi_hba_probe(struct scsi_device *sd, int(*waitfunc)(void));

INTERFACE LEVEL

       Solaris architecture specific (Solaris DDI).

PARAMETERS

       sd	       Pointer to a  scsi_device(9S) structure describing the target.

       waitfunc        NULL_FUNC or SLEEP_FUNC.

DESCRIPTION

       scsi_hba_probe()  is  a	function  providing  the  semantics  of  scsi_probe(9F).   An  HBA  driver  may  call  scsi_hba_probe()  from  its
       tran_tgt_probe(9E) entry point, to probe for the existence of a target on the SCSI bus, or the HBA may set tran_tgt_probe(9E) to  point	to
       scsi_hba_probe directly.

RETURN VALUES

       See scsi_probe(9F) for the return values from scsi_hba_probe().

CONTEXT

       scsi_hba_probe() should only be called from the HBA's tran_tgt_probe(9E) entry point.

SEE ALSO

       tran_tgt_probe(9E), scsi_probe(9F), scsi_device(9S)

       Writing Device Drivers

SunOS 5.10							    30 Aug 1995 						scsi_hba_probe(9F)

10 More Discussions You Might Find Interesting

1. Solaris

HBA Card

Discussion started by: xiaochensg

2. Solaris

Qlogic HBA card in E450 with errors

Discussion started by: floydm

3. Solaris

istall sas raid HBA internal card

Discussion started by: photon

4. Solaris

Install Solaris 10 with an internal StorageTek SAS HBA Raid card

Discussion started by: kakabobo