10-03-2015
No, it is an older 6 or 7 inch tape, but I am sure I could find a drive that fits it and and borrow an old system. A DC600 cartridge?
Actually thought about what you are suggesting. question, is my SCO unix going to be copy protected with a product key like modern windows that will prevent install? No. The only issue is if there are two servers on the same local area network with the same serial number.
Regardless, if I can, I probably going to install UNIX just to play with/learn it.
Also, the APP SW peeps keep telling be BASIS license is tied to HD and it will not work on another HD? I am going to try to contact BASIS Monday.
Most likely the install uses a technique to save the inode number of one of the files in a file; meaning that you cannot copy an installed version to another system.
Another thing I thought about, not sure if it will work, Back up my data daily via FTP and clonezilla the HD. If HD it crashes restore the HD from clonezilla and copy my updated data to the new HD. Of course, this only works if BASIS will re-license me for the new HD AND Clonezilla will clone a UNIX HD that will actually boot...
Using clonezilla, you do not need to re-license Basis, as the inode numbers do not change, you only have to install the pre-configured replacement drive, and restore the data.
9 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
Help, if possible.
In SCO Open Server with installation of two-channel RAID controller the following happens: on the channel 0 disk array is seen by an operational system, and on the channel 1 array is not seen (simultaneously). That is the operational system can not simultaneously use more than... (1 Reply)
Discussion started by: pko60
1 Replies
2. Filesystems, Disks and Memory
Hi,
I have a server that I am adding a RAID that we purchased to. The server works fine. It is running Fedora 7 and is a Dell Precision 690.
When the RAID is attached, it boots up and says the following:
Controller Bus #00, Device#1F, Function#02: 00 Ports
No device found
AHCI BIOS not... (0 Replies)
Discussion started by: user23
0 Replies
3. Red Hat
I am planning on building a fedora box with raid controller (database server).
Is anybody done that ? also what kind of software do you need to backup and recover data. (1 Reply)
Discussion started by: amir07
1 Replies
4. UNIX for Dummies Questions & Answers
I need to put together a RAID1 file server for use by Windoze systems. I've built zillions of windows systems from components. I was a HPUX SE for a long time at HP, but have been out of the game for years.
I've got an old workhorse mobo FIC PA-2013 with a 450 MHz K6 III+ I could use, but I'd... (2 Replies)
Discussion started by: pcmacd
2 Replies
5. Hardware
Hi All
I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command.
Following is the hardware RAID output.
root@oracledatabaseserver / $ raidctl
RAID Volume RAID RAID Disk... (0 Replies)
Discussion started by: Tirmazi
0 Replies
6. Hardware
Hi guys.
if we want to use SSD drives on a database server, can we use RAID 0 configuration because of their reliability? (3 Replies)
Discussion started by: majid.merkava
3 Replies
7. Linux
I just built a home computer with 3TB hard drives I wanted to set up in a RAID 5 and load Ubuntu server onto it.
The first thing I did was set up the drives in a RAID 5 using just the motherboard chipset software to do it, so a 'hardware' RAID basically.
I installed Windows first to see if... (2 Replies)
Discussion started by: lorewap3
2 Replies
8. Filesystems, Disks and Memory
First time poster and a very new Unix user, so I'll just pre-apologize for stupid questions now.
Does anybody know of a good RAID 1 hard drive backup that is Unix friendly? I want to avoid any hardcore programming. Can you recommend both NAS and non-NAS options? I need to do nightly backups... (31 Replies)
Discussion started by: c.wakeman
31 Replies
9. Hardware
We have a 3ware RAID server at work, and as the appointed systems administrator (by virtue of being the one with the most knowledge) I've taken on the job of maintaining it. I've installed smartmontools on it to keep an eye on the drives and run scans every day, and looking at the data from the... (0 Replies)
Discussion started by: Krendoshazin
0 Replies
LEARN ABOUT DEBIAN
grub-install
GRUB-INSTALL(8) FSF GRUB-INSTALL(8)
NAME
grub-install - install GRUB on your drive
SYNOPSIS
grub-install [OPTION] install_device
DESCRIPTION
Install GRUB on your drive.
-h, --help
print this message and exit
-v, --version
print the version information and exit
--root-directory=DIR
install GRUB images under the directory DIR instead of the root directory
--grub-shell=FILE
use FILE as the grub shell
--no-floppy
do not probe any floppy drive
--force-lba
force GRUB to use LBA mode even for a buggy BIOS
--recheck
probe a device map even if it already exists
INSTALL_DEVICE can be a GRUB device name or a system device filename.
grub-install copies GRUB images into the DIR/boot directory specfied by --root-directory, and uses the grub shell to install grub into the
boot sector.
REPORTING BUGS
Report bugs to <bug-grub@gnu.org>.
SEE ALSO
grub(8), update-grub(8).
The full documentation for grub-install is maintained as a Texinfo manual in the grub-legacy-doc package. If the info and grub-install
programs are properly installed at your site, the command
info grub-install
should give you access to the complete manual.
grub-install (GNU GRUB 0.97) January 2013 GRUB-INSTALL(8)