Sponsored Content
Operating Systems Linux Creating file systems (LVM v Multipath) Post 302956600 by fretagi on Thursday 1st of October 2015 09:03:31 AM
Old 10-01-2015
Please see if this is correct:

1st step:
Code:
 ls /dev/sd*
/dev/sda  /dev/sda1  /dev/sda2  /dev/sdb  /dev/sdb1  /dev/sdc  /dev/sdd  /dev/sde  /dev/sdf  /dev/sdg  /dev/sdh  /dev/sdi  /dev/sdj

2nd step:
Code:
fdisk /dev/sdj
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0xde657be6.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
         switch off the mode (command 'c') and change display units to
         sectors (command 'u').

Command (m for help):

3rd step:
Code:
Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4):

I am now stuck, because there other file systems on this system with other partitions, so I dont know what number to choose.

Please help
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Creating user ids on multiple systems simultaneously

I am trying to think of a way to create user ids on multiple Linux systems in one fell swoop without logging onto each system indivually. Is there a way to do this with ssh commands? I don't want to use NIS/LDAP solution just a simple shell script utilitarian methodoloy would suffice. Also, I am... (1 Reply)
Discussion started by: darthur
1 Replies

2. Programming

Creating a Unique ID on distributed systems

Hi, How do you actually create a unique ID on a distributed system. I looked at gethostid but the man page says that its not guaranteed to be unique. Also using the IP address does not seem to be a feasible solution. Is there a function call or mechanism by which this is possible when even the... (4 Replies)
Discussion started by: pic
4 Replies

3. UNIX for Dummies Questions & Answers

Creating create mirrored disk files systems using mkfs command

What is the correct mkfs syntax to create mirrored disk files systems? I need to make the file system 20gb. For example: machine# mkfs -F ufs /dev/md/dsk/d40 size not specified ufs usage: mkfs special size(sectors) \ -m : dump fs cmd line used to make this partition -V : print this... (4 Replies)
Discussion started by: GLJ@USC
4 Replies

4. UNIX for Advanced & Expert Users

Data Recovery from file system overwritten with LVM.

Hey peeps, Here is somethin u might find interestin.... Is it possible to recover data from a partition which used to be an ext3 file sytem with some nice forgotten backups, which now is an lvm partion containg root partition of another OS. :) I couldn't create any mess better than this, can... (2 Replies)
Discussion started by: squid04
2 Replies

5. HP-UX

How to reduce LVM to create another LVM

Hi, I'm new to HP-UX. I have LVM on /var with 92Gig. I would like to reduce it to create another LVM for Oracle client with 800 meg or so. How to do it. I'm running 11.iv3 Thanks (4 Replies)
Discussion started by: lamoul
4 Replies

6. Linux

Creating Filesystem using DD for LVM

I created a new filesystem using dd and mounted: I have a filesystem /FAW with 1Terra space /dev/sdb1 1151331444 24742604 1068104612 3% /FAW Steps I followed to create a new filesystem # dd if=/dev/zero of=/FAW/vms/linux_vm/disk2.img bs=1 count=1024 seek=500G # mke2fs... (10 Replies)
Discussion started by: sriram003
10 Replies

7. UNIX for Dummies Questions & Answers

How to convert non LVM root partition to LVM?

Hi Guys, I m using redhat 6, I have installed root partition as non-LVM . Is there any way i can convert it to LVM? (1 Reply)
Discussion started by: pinga123
1 Replies

8. Linux

Creating /boot partition for LVM VG

Hi, I have a server booted into sysresccd (mini-linux OS) with 1 40 GB disk attached I am trying to create a volume group and restore another server into the new one However, when I try to create a partition for /boot it seems that my VG in LVM is not recognized anymore These are the... (2 Replies)
Discussion started by: galuzan
2 Replies

9. UNIX for Dummies Questions & Answers

Question about lvm file creation

Hi, I have below code for disk creation disk_list=$(ls /dev/sd) for disk in $disk_list do pvcreate $i done So what my understanding is first it is checking the disk under /dev sdb,sdc,sdd,...sdz whether 25 disk are existing if not then its creating the 25 physical volume. I... (4 Replies)
Discussion started by: stew
4 Replies

10. Solaris

Creating multipath device with FC Disks

Hello, I am trying to setup a storage server with salvaged equipments: QSSC-S4R server, with QLogic 2562 FC HBA's Clariion KTN-STL4 4GB FC Enclosures Disks Salvaged from EMC Vmax Disks are 520B sector size so i converted to 512B in linux environment and create multipath successfully. But... (4 Replies)
Discussion started by: amd103
4 Replies
FDFORMAT(8)						     Linux Programmer's Manual						       FDFORMAT(8)

NAME
fdformat - Low-level formats a floppy disk SYNOPSIS
fdformat [ -n ] device DESCRIPTION
fdformat does a low level format on a floppy disk. device is usually one of the following (for floppy devices, the major = 2, and the minor is shown for informational purposes only): /dev/fd0d360 (minor = 4) /dev/fd0h1200 (minor = 8) /dev/fd0D360 (minor = 12) /dev/fd0H360 (minor = 12) /dev/fd0D720 (minor = 16) /dev/fd0H720 (minor = 16) /dev/fd0h360 (minor = 20) /dev/fd0h720 (minor = 24) /dev/fd0H1440 (minor = 28) /dev/fd1d360 (minor = 5) /dev/fd1h1200 (minor = 9) /dev/fd1D360 (minor = 13) /dev/fd1H360 (minor = 13) /dev/fd1D720 (minor = 17) /dev/fd1H720 (minor = 17) /dev/fd1h360 (minor = 21) /dev/fd1h720 (minor = 25) /dev/fd1H1440 (minor = 29) The generic floppy devices, /dev/fd0 and /dev/fd1, will fail to work with fdformat when a non-standard format is being used, or if the for- mat has not been autodetected earlier. In this case, use setfdprm(8) to load the disk parameters. OPTIONS
-n No verify. This option will disable the verification that is performed after the format. SEE ALSO
fd(4), setfdprm(8), mkfs(8), emkfs(8) AUTHOR
Werner Almesberger (almesber@nessie.cs.id.ethz.ch) Linux 0.99 1 February 1993 FDFORMAT(8)
All times are GMT -4. The time now is 09:22 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy