I have a system running
and I was told by the NetApp Admin that he has provided 5 LUNs of 1Tb, 200Gb and remaining 3 of 300Gb, but I am not able to see the new LUNs.
I have type the following:
them rebooted the system, after run the same command ls, which provided me with same results as above.
them checking on google, I found the following steps:
them:
them:
What is the correct mkfs syntax to create mirrored disk files systems? I need to make the file system 20gb. For example:
machine# mkfs -F ufs /dev/md/dsk/d40
size not specified
ufs usage: mkfs special size(sectors) \
-m : dump fs cmd line used to make this partition
-V : print this... (4 Replies)
Hi everyone , i m working on Sun solaris and i have a file "smsapp.cur" which has information like this paragraph given below , there are millions of such paragraphs
From:923212802736
To:923222326807
logMessage: 07-04-08 17:34:29 Getting message topup from code page default in language English... (2 Replies)
hi friends how we can create luns in A1OOO storage ..plzhelp its very urgent
when ever i am connect to A1000 raid controller through laptop with console cable with the help of hyperterminal..i isued serial port parameters which i mentioned below..
Set serial port parameters to:
�... (1 Reply)
I need to read the last line of a log file and save it, sleep for X minutes and read the last line again. If the line is the same, exit 1, otherwise sleep for X minutes until the last line contains 'Status: Process completed'. Can anyone offer advice here? Thanks. (2 Replies)
In Solaris the administrator has to update /kernel/drv/sd.conf file to tell the sd driver to scan for a broader range of scsi devices.
Can someone please tell me what file needs to be update in Redhat Linux 5 for the same.
Second part of the question is WWN for HBA's can be found (atleast in my... (1 Reply)
Hi,
Need help ...I want to create multiple directories in different /file systems using for loop..eg.../ORCL_data01/oradata/orcl/ctl.
../ORCL_data01/oradata/orcl/data.
../ORCL_data01/oradata/orcl/redo.
Script :-
=========
for dir in `ls -d... (8 Replies)
Hi
Please I dont have a lot of redhat skills, but I need some help on creating a file system.
I need to rescan for this new LUN, so I try to check existing LUNs:
fdisk -l
Disk /dev/sda: 299.4 GB, 299439751168 bytes
255 heads, 63 sectors/track, 36404 cylinders
Units = cylinders of... (8 Replies)
Hi everyone,
We have the below sun Operating system, Now our storage team have Create a 500GB LUN for this server, How can i scan and mount the shared LUN ? Could anyone help me to resolve this issue.
SunOS my_hostname.com 5.10 Generic_150400-09 sun4v sparc sun4v
Update:
--------
I... (9 Replies)
Gents,
Please can you help.
I want to create a list which contends the complete patch of the location of some directories with the size of each file.
need to select only .txt file
In this case I am try to find the subdirectories tp1 and tp2 and create the output list.
jd175-1
tp1... (3 Replies)
I am trying to use bash to automate the scan of a specific directory using clamav. Having this in place is a network requirement. The below is an attempt to:
1. count the extensions (.txt, .jpeg) in a directory and write them to a virus-scan.log (section in bold)
2. scan each folder in the... (6 Replies)
Discussion started by: cmccabe
6 Replies
LEARN ABOUT DEBIAN
rescan-scsi-bus
RESCAN-SCSI-BUS.SH(8) System Manager's Manual RESCAN-SCSI-BUS.SH(8)NAME
rescan-scsi-bus.sh - rescan the SCSI bus.
SYNOPSIS
rescan-scsi-bus.sh [ -l ] [ -w ] [ -c ] [ -r ] [ host... ]
DESCRIPTION
rescan-scsi-bus.sh is a program that is used to rescan the SCSI bus using the SCSI add-single-device feature of the Linux SCSI layer.
OPTIONS -l Activates scanning for LUNs 0 .. 7 (default: 0).
-L NUM Activates scanning for LUNs 0 .. LUN (default: 0).
--luns=LIST
Scan only LUNs in LIST.
-w Enables scanning for device IDs 0 .. 15 (default: 0 .. 7).
--ids=LIST
Scan only device IDs in LIST.
-i, --issue-lip
Issue a FibreChannel LIP reset (default: disabled).
-r, --remove
Enables removing of devices (default: disabled).
--forceremove
Remove and readd every device (dangerous).
-c Enables scanning of channels 0 1 (default: 0).
--channels=LIST
Scan only channels in LIST.
host, --hosts=LIST
If host adapters are given, only these are scanned (default: all).
--nooptscan
Don't stop looking for LUNs if 0 is not found.
--color
Use coloured prefixes OLD/NEW/DEL.
LIST is a comma separated list of single values and ranges (no spaces allowed), e.g. 0,2-3,8,10-15.
AUTHOR
rescan-scsi-bus.sh was written by Kurt Garloff <garloff@suse.de>.
COPYRIGHT
This program is free software. You can use it under the terms of the GNU GPL (General Public License) Version 2 (or any later version, at
your option). Note, that the GNU GPL implies, that there is NO WARRANTY at all. Full text of the GPL can be found in /usr/share/common-
licenses/GPL file.
AVAILABILITY
rescan-scsi-bus.sh is available from
http://www.garloff.de/kurt/linux/scsidev/
March 1998 RESCAN-SCSI-BUS.SH(8)