hi friends,
i know that when there is a crash then that memory image is
put into /var/adm/crash
but if the system hangs up and if i have access to console of
that machine then how can i take the crash dump manully.
thanks (2 Replies)
My sparc solaris 8 server crashed/rebooted yesterday and I have the vmcore files. I have some initial output from SCAT and ACT. I have not included all but any info would be helpful. I can supply more output if necessary.
Thanks you.
Can I have any information about this ACT and SCAT... (2 Replies)
Hi,
I'm running Solaris 10 with a zone called "testzone"
If I do a "reboot -d" on the host, as expected the kernet panics, reboots and creates a crash dump file in /var/crash
However no crash file is created in testzone.
My question is how can I tell if a zone crashs or shuts down... (4 Replies)
Hi,
Is it possible to have a Solaris cluster of 2 nodes at SITE-A using SVM and creating metaset using say 2 LUNs (on SAN). Then replicating these 2 LUNs to remote site SITE-B via storage based replication and then using these LUNs by importing them as a metaset on a server at SITE-B which is... (0 Replies)
Hi gurus,
I will be glad if anyone can help me with this:
How do you copy a crash dump file to send to your support provider?
Thanks lots guys. (1 Reply)
Hello Guys,
I need a little help here. I have been studying crash dump and per what I am reading, you can dedicate a slice to use as a dump device. Now when you dedicate this slice, do you have to :
1) create a mount point?
2) add entry in /etc/vfstab?
3) is this slice wu or wm?
4) should... (3 Replies)
Dear all
i have two aix system
-Model : P770
-OS version: AIX 6.1
-patch level : 6100-07-04-1216
-ha version : HACMP v 6.1.0.8
-host : A, B
last Wednesday, my B system suddenly went down with crash dump. after 1 minute, A system went down with crash dump. I checked the dump of A-system... (6 Replies)
Discussion started by: tomato00
6 Replies
LEARN ABOUT OSF1
reboot
reboot(8) System Manager's Manual reboot(8)NAME
reboot - Restarts the machine
SYNOPSIS
/usr/sbin/reboot [-dlnq]
DESCRIPTION
When the system is running and multiple users are logged in, use the shutdown -r command to perform a reboot operation. If no users are
logged in, use the reboot command.
The reboot command normally stops all running processes, syncs the disks, logs the reboot, and writes a shutdown entry in the login
accounting file, /var/adm/wtmp.
The reboot command uses the sync call to synchronize the disks, and to perform other shutdown activities such as resynchronizing the hard-
ware time-of-day clock. After these activities, the system reboots. By default, the system starts and the file systems are automatically
checked. If the start-up activities are successful, the system comes up in the default run-level.
You must have root privileges to use this command. Using the -n flag can result in file system damage.
FLAGS
Generates a crash dump of the system before halting it. Can be used with any of the other flags. Does not log the reboot using syslog
Does not sync the disks or log the reboot using syslog Performs a quick reboot without first shutting down running processes; does not log
the reboot using syslog
EXAMPLES
To enable the default reboot action, enter: reboot This command causes the system to stop all running processes, sync the disks, log the
shutdown, and perform other routine shutdown and reboot activities. To shut down the system without logging the reboot, enter: reboot -l
This command shuts down the system and performs all shutdown and reboot activities, except logging the shutdown. To reboot the system
abruptly, enter: reboot -q This command reboots the system abruptly without shutting down running processes.
FILES
Specifies the command path Specifies the login accounting file Specifies the path of the syslog daemon
RELATED INFORMATION
Commands: fsck(8), halt(8), init(8), savecore(8)shutdown(8), syslogd(8)
Functions: reboot(2), sync(2), syslog(3) delim off
reboot(8)