I'm trying to jump start a new Sun Server from an existing jump start server, but this last machine is giving me driver errors :s
It doesn't make sense as we've built a few of these exact same servers just recently, but this last one displays:
"No driver (or driver binding) was found for the interface used to boot.
A driver (or driver binding) may be available in an updated or patch from
Sun, or from the interface vendor."
Has anyone seen this error before? From the research I've done it suggests that I have to unpack the miniboot and add in the missing driver, but we have over a dozen of these X4-2's which have jump started just fine.
Hi,
I build a jumpstart server with a running dhcp server. I already managed to install a x86 client via network. But my sparc clients aren't still working.
When booting via network I get the following message:
Timeout waiting for ARP/RARP packet
I ran "snoop" on the server:
client2 ->... (1 Reply)
I just built a jumpstart server on a Solaris 9 sun box and have had no problems jumpstarting other sol9 boxes using the custom rules. I've also copied a Solaris 10 image onto that same solaris 9 server and have had problems loading Solaris 10. These boxes will go directly to the manual OS install... (5 Replies)
Hi all ,
I am trying to jumpstart ( webstart) solaris 9 on E2900 ( client) using the DVD of a V440 server ( jumstart server). I did the setup for the V440 as follows :
cleaning up preexisting install client "XXXXXXX"
removing XXXXXXXfrom bootparams
removing /etc/bootparams, since it is... (14 Replies)
I need a little help figuring out why my custom jumpstart network installation is dumping me to a manual install.
I am trying to install Solaris 10 (unattended) over the wire from my jumpstart server to an HP Proliant DL380 server but I'm having difficulties with the unattended part.
So, what... (2 Replies)
Hi All
I have a Solaris 10 jumpstart boot/config server set up on a subnet, and am trying to use it to build a client (the only other machine on the network). Things start out just fine, with the client booting into the Solaris Installation program, but then it just coredumps just as it's... (4 Replies)
I'm trying to jumpstart my remote server. My /etc/hosts and /etc/ethers files have the correct data. Keep getting the following message at the ok prompt
after running a boot net - install
Link hasn't comeup yet
Ran a test-net and got the following message.
Link is -- down
When... (7 Replies)
Hello everyone,
I tried to install solaris 10 using the command # boot net - install.
I take the image correctly but when you start installing the Operating system installation takes a long (4 hours I have left and not advancing but not send me any errors), it can be seen from the following:
... (7 Replies)
I am performing this installation on a Sun T5220. There is an aftermarket Adaptec StorageTek raid controller card installed. I have created the raid array, and it is referred to as c1t0d0. Here is the profile I have created:
install_type
initial_install
system_type server
cluster SUNWCXall... (4 Replies)
I have a laptop and need to build an Oracle Linux kickstart server and a Solaris Jumpstart server that can build sparc and x86 systems.
Is the best way to create a dual boot from grub for Oracle Linux and Solaris x86?
Can the Oracle Kickstart be used as a Jumpstart to build both Solaris 10... (2 Replies)
Discussion started by: Gian
2 Replies
LEARN ABOUT DEBIAN
moon-buggy
moon-buggy(6) Games Manual moon-buggy(6)NAME
moon-buggy - drive some car across the moon
SYNOPSIS
moon-buggy [-hnsV] [--help] [--no-title] [--show-scores] [--version]
DESCRIPTION
Moon-buggy is a simple character graphics game, where you drive some kind of car across the moon's surface. Unfortunately there are dan-
gerous craters there. Fortunately your car can jump over them!
OPTIONS
The program understands the following command line options.
-h, --help
shows a short usage message.
-m, --mesg
disable write access to your terminal by other users, so your boss can't disturb your game play with the help of "write" or "fin-
ger".
-n, --no-title
skips the title screen.
-s, --show-scores
shows the current highscore list and exits.
-V, --version
prints the program's version to standard output and exits.
KEYS
The moon-buggy is controlled by a couple of keys, which are described near the bottom of the screen. Most important are the following
keys.
SPC, j makes your car jump. The length of a jump is fixed and you can only start a new jump, while the wheels have contact to the ground.
a, l fires the mining laser. The laser is used to remove stones, which may block your way.
q quits the game prematurely. But you still keep your score and may enter the highscore list.
FILES
The following files on your system are related to moon-buggy.
/usr/games/moon-buggy
the moon-buggy executable.
/var/games/moon-buggy/mbscore
the global score file
$HOME/.mbscore
the local score file. This is used, if moon-buggy has no write access to the global score file.
SEE ALSO
Moon-buggy Usage and Maintenance by Jochen Voss.
COPYING
Copyright (C) 2004 Jochen Voss
Moon-buggy is free software. Read the file COPYING of the source code distribution for details or press 'c' at moon-buggy's title screen.
AUTHOR
The program moon-buggy was implemented by Jochen Voss (voss@seehuhn.de).
moon-buggy 1.0.51+esd Dec 27 2004 moon-buggy(6)