08-26-2015
How to change bonding configuration in Linux 5.9?
I have 2 ethernet port in my linux (Red hat 5.9) machine.The 2 ethernet ports (eth0 and eth1)are bonded and are making one single ethernet port namely bond0.
I have adaptive load share option selected.Now in this condition, if my eth0 port disconnected due to some failure, then will eth1 take the charge through bond seamlessly?Also please tell how to change bond setting in Red Hat Linux 5.9.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
We have several Printers that are pointing to a print server that is now defunct. I need to point these printers to the new print server.
I am aware I need to change the configuration in /usr/spool/lp/admins/lp/printers/printername/configuration as well as in /etc/printers.conf.
However my... (0 Replies)
Discussion started by: tugger
0 Replies
2. Shell Programming and Scripting
Hi
I want to create a configuration file from a template one.
The only thing to change for now is the port number that I need to take from another file that has this format:
server:port
So I need to take the 2nd field.
server is passed in the script argument.
how to do that? I... (1 Reply)
Discussion started by: melanie_pfefer
1 Replies
3. AIX
Hello Everybody,
I have a question regarding SLAVE NIS SERVER in aix.
We are using NIS master of Sun Solaris 9.0 which is on different subnet i.e. 10.197.93.0. And Our slave server is having AIX 5.3 installed which is on 10.207.13.0 subnet.
I have a query regarding its name and ip address... (0 Replies)
Discussion started by: jit15975
0 Replies
4. UNIX for Dummies Questions & Answers
Hello All
Please can some one help me to use my USB wireless card D-Link on my laptop
i want to configure it, I am using madriva 2010 my system Acer Aspire 4315
i want to know how to configure it and where to get special driver to download the driver
Please (0 Replies)
Discussion started by: bealoumluka
0 Replies
5. UNIX for Dummies Questions & Answers
Hi,
How do i check the server configuration in Linux like the RAM size, OS version, type of database configured etc...basically i need everything about the server.
Is there a command to see this information??
Thanks in advance!!! (7 Replies)
Discussion started by: stunnerz_84
7 Replies
6. Linux
I have a question concerning default gateways in RHEL. In Linux, the default gateway does not have to be associated with a specific interface - when you look at your routing table with route -n, your default gateway can be associated with the default route on the last line, and doesn't have to be... (0 Replies)
Discussion started by: rojizo
0 Replies
7. Emergency UNIX and Linux Support
Hello HP-UX experts,
Server = rx8640 Node partition
OS = HP-UX 11.23
arch = IA64
Network switch = Foundry 16 port switch (1Gbps)
Existing configuration: Tough to explain as it is very messy (see below for the link of zip of network related fles). 2 x 2Gbps aggregates configured some time... (1 Reply)
Discussion started by: prvnrk
1 Replies
8. IP Networking
HI all,
First post on the forum, and my first proper project on the Paspberry Pi, so sorry if this is in the wrong place.
I am trying to turn my Pi in to a 3G/4G Bonding router. I have been researching and trying this for a week or so now. The basic plan is to have up to 6 ZTE MF823 USB... (0 Replies)
Discussion started by: elliottlc
0 Replies
9. Linux
Respected Members,
We encountered an issue during node reboot when eth1 and eth5 of bond1 were behaving unusual(both eth1 and eth5 were in unknown states and ifdown and ifup were used to rectify). Please find the messages and configuration files as below and please let me know for any other... (0 Replies)
Discussion started by: Mudit Bansal
0 Replies
10. Red Hat
I have changed bond configuration(mode) from TLB to ALB in modprobe.conf file.
But after the restart of machine the change is not reflected in the system.While doing a >>cat /sys/class/net/bond0/bonding/mode, it shows TLB mode, where as in modprobe.conf file alb exists.Can somebody help me out to... (1 Reply)
Discussion started by: Anjan Ganguly
1 Replies
LEARN ABOUT SUSE
tc-matchall
Match-all classifier in tc(8) Linux Match-all classifier in tc(8)
NAME
matchall - traffic control filter that matches every packet
SYNOPSIS
tc filter ... matchall [ skip_sw | skip_hw ] [ action ACTION_SPEC ] [ classid CLASSID ]
DESCRIPTION
The matchall filter allows to classify every packet that flows on the port and run a action on it.
OPTIONS
action ACTION_SPEC
Apply an action from the generic actions framework on matching packets.
classid CLASSID
Push matching packets into the class identified by CLASSID.
skip_sw
Do not process filter by software. If hardware has no offload support for this filter, or TC offload is not enabled for the inter-
face, operation will fail.
skip_hw
Do not process filter by hardware.
EXAMPLES
To create ingress mirroring from port eth1 to port eth2:
tc qdisc add dev eth1 handle ffff: ingress
tc filter add dev eth1 parent ffff:
matchall skip_sw
action mirred egress mirror
dev eth2
The first command creats an ingress qdisc with handle ffff: on device eth1 where the second command attaches a matchall filters on it that
mirrors the packets to device eth2.
To create egress mirroring from port eth1 to port eth2:
tc qdisc add dev eth1 handle 1: root prio
tc filter add dev eth1 parent 1:
matchall skip_sw
action mirred egress mirror
dev eth2
The first command creats an egress qdisc with handle 1: that replaces the root qdisc on device eth1 where the second command attaches a
matchall filters on it that mirrors the packets to device eth2.
To sample one of every 100 packets flowing into interface eth0 to psample group 12:
tc qdisc add dev eth0 handle ffff: ingress
tc filter add dev eth0 parent ffff: matchall
action sample rate 100 group 12
SEE ALSO
tc(8),
iproute2 21 Oct 2015 Match-all classifier in tc(8)