Sponsored Content
Full Discussion: Zfs rpool size
Operating Systems Solaris Zfs rpool size Post 302953033 by freshmeat on Tuesday 25th of August 2015 04:05:43 AM
Old 08-25-2015
rpool/dump volsize 20G local
rpool/swap volsize 16G local

I have cleared some snapshots, now the snapshot with compression size is around 13GB. I am still thinking to reduce it below 10GB because I have disk space constraints. SmilieSmilieSmilieSmilie
 

10 More Discussions You Might Find Interesting

1. Solaris

How do I set the block size in ZFS?

I was able to create a zpool and then created a zfs filesystem (BTW, thanks to all those who helped me get by the hard drive formatting issues I had posted here earlier). I read that ZFS does variable block size, that is, a user can specify a blocksize, and if a file is smaller than the user... (1 Reply)
Discussion started by: sqa777
1 Replies

2. Solaris

rpool issue

My system is showing following .. how can i remove this rpool .. ? zpool status -v rpool pool: rpool state: UNAVAIL status: One or more devices could not be opened. There are insufficient replicas for the pool to continue functioning. action: Attach the missing device and... (0 Replies)
Discussion started by: fugitive
0 Replies

3. Solaris

ZFS : Can arc size value exceed Physical RAM ?

Hi, kstat -p -m zfs -n arcstats -s size returns zfs:0:arcstats:size 8177310584 this values is approx (7.61 GB) but my Physical Memory size is only 6144 Megabytes. Can this happen ? if yes, then how can I find free memory on the system. BTW, I ran the kstat commands from a Non... (2 Replies)
Discussion started by: sapre_amit
2 Replies

4. Solaris

ZFS rpool physical disk move

I'd like to finish setting up this system and then move the secondary or primary disk to another system that is the exact same hardware. I've done things like this in the past with ufs and disk suite mirroring just fine. But I have yet to do it with a zfs root pool mirror. Are there any... (1 Reply)
Discussion started by: Metasin
1 Replies

5. Solaris

Splitting rpool mirror disk in ZFS

Hi, I have Solaris-10 (release-7) box without any non global zone. I have a very critical change after couple of days from application side. For safer side, we want to keep few level of backups just in case of faliure. This server is having three pool root@prod_ddoa01:/# zpool list NAME SIZE... (2 Replies)
Discussion started by: solaris_1977
2 Replies

6. Solaris

Resize rpool

Hi, I have rpool about 500G. So i want to use 210G from rpool and assign mount point as /database. I seek in google and couldn't found it. Does anyone know how to achieve it? Thanks. (2 Replies)
Discussion started by: mzainal
2 Replies

7. Solaris

Need help to understand zfs rpool space allocation

Hi, I am unable to understand that, in one of my servers while df -kh Filesystem Size Used Available Capacity Mounted on rpool/ROOT/solaris-2 98G 11G 29G 29% / Even the Root FS filled on 40gb and system becomes unstable. it is showing... (4 Replies)
Discussion started by: anuragr
4 Replies

8. Solaris

ZFS: /system/zones "respawning" on rpool

Hi, I have this fresh installation of Solaris 11.3 sparc. I have two zfs pools both using two disks in mirroring mode, both are online. I want to move /system/zones, currently rpool/VARSHARE/zones, from rpool to the other zfs pool so my zones don't consume space on the disks allocated to... (1 Reply)
Discussion started by: X96
1 Replies

9. Solaris

Trying to create ZFS slice on rpool

I have a 240GB disk as rpool. I have installed Solaris 11.3 to a partition which is 110GB. Now I have another 130GB which is unallocated. I want to use that additional space as a temporary folder to be shared between Solaris and Linux. The additional space had no /dev/dsk/c2t4... entry so I used... (8 Replies)
Discussion started by: kebabbert
8 Replies

10. Solaris

How to increase the size of rpool in Solaris 11?

Hi Please let me know how to increase the size of rpool in solaris 11 in ldom. I know how to map the new LUN to LDOM after that please let me know the procedure to increase the rpool and how to identify new disk in OBP level of ldom as I need to set the new/lun to be my new boot device. (5 Replies)
Discussion started by: hb00
5 Replies
GStreamer(1)						      General Commands Manual						      GStreamer(1)

NAME
gst-launch - build and run a GStreamer pipeline SYNOPSIS
gst-launch [OPTION...] PIPELINE-DESCRIPTION DESCRIPTION
gst-launch is a tool that builds and runs basic GStreamer pipelines. In simple form, a PIPELINE-DESCRIPTION is a list of elements separated by exclamation marks (!). Options may be appended to elements, in the form "option=value". A group of elements surrounded by curly braces {, } will be executed in a separate thread. Connections between non-consecutive elements are created by specifying a element names and pad names immediately before and after the exclamation mark, in the form "element0.sinkpad!element1.srcpad". The default name given to an element is the name of its class followed by an index. If the element names are omitted, the previous and next elements in the PIPELINE-DESCRIPTION will be used. If the pad names are omitted, a default pad of the correct type (source or sink) is found on the given element, typically named "src" or "sink". See the GStreamer documentation for a complete description of a a PIPELINE-DESCRIPTION. EXAMPLES
The examples below assume that you have the correct plug-ins available. In general, "osssink" can be substituted with another audio output plug-in such as "esdsink", "alsasink", or "artsdsink". Likewise, "xvideosink" can be substituted with "sdlvideosink" or "aasink". Audio playback Play the mp3 music file "music.mp3" using a libmad-based plug-in and output to an OSS device: gst-launch filesrc location=music.mp3 ! mad ! osssink Play an Ogg Vorbis format file: gst-launch filesrc location=music.ogg ! vorbisfile ! osssink Play an mp3 file or stream retrieved via http: gst-launch httpsrc location=http://domain.com/music.mp3 ! mad ! osssink Play an mp3 file or stream using GNOME-VFS: gst-launch gnomevfssrc location=music.mp3 ! mad ! osssink gst-launch gnomevfssrc location=http://domain.com/music.mp3 ! mad ! osssink Use GNOME-VFS to play an mp3 file located on an SMB server: gst-launch gnomevfssrc location=smb://computer/music.mp3 ! mad ! osssink Format conversion Convert an mp3 music file to an Ogg Vorbis file: gst-launch filesrc location=music.mp3 ! mad ! vorbisenc ! filesink location=music.ogg Alternatively, to convert to the FLAC format, use the command line: gst-launch filesrc location=claptrap.mp3 ! mad ! flacenc ! filesink location=test.flac Other Plays a .WAV file: gst-launch filesrc location=music.wav ! wavparse ! osssink Convert a .WAV file into Ogg Vorbis (or mp3) file: gst-launch filesrc location=music.wav ! wavparse ! vorbisenc ! filesink location=music.ogg gst-launch filesrc location=music.wav ! wavparse ! mpegaudio ! filesink location=music.mp3 Alternatively, if you have lame installed (and have the lame plug-in), you can substitute lame for mpegaudio in the previous example. It gives better results than mpegaudio. Rip all tracks from compact disc and convert them into a single mp3 file: gst-launch cdparanoia ! mpegaudio ! filesink location=cd.mp3 Using gst-inspect, it is possible to discover settings for cdparanoia that will tell it to rip individual tracks. Record sound from your audio input and encode it into an ogg file: gst-launch osssrc ! vorbisenc ! filesink location=input.ogg Video Display only the video portion of an MPEG-1 video file, outputting to an X display window (The "queue" element is necessary to buffer data between the threads): gst-launch filesrc location=JB_FF9_TheGravityOfLove.mpg ! mpegdemux video_%02d!src { queue ! mpeg2dec ! xvideosink } Display the video portion of a .vob file (used on DVDs), outputting to an SDL window: gst-launch filesrc location=/flflfj.vob ! mpegdemux video_%02d!src { queue ! mpeg2dec ! sdlvideosink } Play both video and audio portions of an MPEG movie: gst-launch filesrc location=movie.mpg ! mpegdemux video_%02d!src { queue ! mpeg2dec ! sdlvideosink } mpegdemux0.audio_%02d!src { queue ! mad ! osssink } Play an AVI movie: gst-launch filesrc location=movie.avi ! avidemux video_%02d!src { queue ! windec ! sdlvideosink } Network streaming An MPEG-1 system stream can be streamed via RTP from one machine to another. On the receiver, execute: gst-launch rtprecv media_type=mpeg1_sys ! mpegdemux video_%02d!src { queue ! mpeg2dec ! xvideosink } mpegdemux0.audio_%02d!src { queue ! mad ! osssink } On the transmitter, execute: gst-launch filesrc location=mpeg1system.mpeg ! mpegparse ! rtpsend ip=IPorHostname Diagnostic Generate a null stream and ignore it: gst-launch fakesrc ! fakesink Generate a pure tone to test the audio output: gst-launch sinesrc ! osssink Generate a familiar test pattern to test the video output: gst-launch videotestsrc ! xvideosink OPTIONS
gst-launch accepts the following options: --help Print help synopsis and available FLAGS --silent Do not output status information --exclude=TYPE, -XTYPE Do not output status information of TYPE --output=FILE, -oFILE Save XML representation of pipeline to FILE and exit --gst-info-mask=FLAGS GStreamer info flags to set (list with --help) --gst-debug-mask=FLAGS GStreamer debugging flags to set (list with --help) --gst-mask=FLAGS GStreamer info and debugging flags to set (list with --help) --gst-plugin-spew GStreamer info flags to set Enable printout of errors while loading GStreamer plugins --gst-plugin-path=PATH Add directories separated with ':' to the plugin search path SEE ALSO
gst-complete(1), gst-register(1), gst-inspect(1) AUTHOR
The GStreamer team at http://gstreamer.net/ March 2001 GStreamer(1)
All times are GMT -4. The time now is 10:56 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy